User Manual

6
RS8 Owner’s Manual
1. Lay the main frame down on a solid, level surface and loosen the clamp q bolt, open the right arm, and
then tighten the bolt again so it is secure.
2. Stand the main frame on a flat, level surface.
If the raised main frame wobbles when you shake it, check for loose bolts and tighten them.
3. Loosen the four key bolts in clamps w, e, and r using the drum key, open the legs and adjust the
position, and then tighten the key bolts again so they are secure.
Assembling the Rack
NOTE
The drum key can be found in the pad set package.
Clamp q
Bolt
Right arm
Loosen
Tighten
Clamp w
Clamp e
Clamp r
Key bolt
Drum key
Loosen
Tighten