Owner`s manual

8-25
ESU03890
Rear suspension damping force adjustment
For RXW10/RXW10S
The damping force can be adjusted by turning the
adjuster
1
.
CD-20E
CAUTION
:
@
●
Do not continue to turn the adjuster in
direction a after it stops. The shock absorber
can be damaged and damping force adjustments
cannot be made.
●
Do not turn the adjuster in direction b more than
16 clicks. Even if the adjuster is continually
turned after 16 clicks, there will be no change in
the damping force.
●
Be sure to stop the adjuster at a position where
there is a click.
@
WARNING
@
This shock absorber contains highly pressurized
nitrogen gas. It could explode by improper handling,
causing injury, or property damage.
●
Do not tamper with or attempt to open the shock
absorber.
●
Do not subject the shock absorber to an open
flame or other high heat source, which could
cause it to explode.
●
Do not deform or damage the shock absorber in
any way.
●
Do not dispose of a worn or damaged shock
absorber by yourself. Take the unit to a Yamaha
dealer.
@
Adjuster position
Turns out
b
∗
Turns in
a
Damping force
Soft Hard
∗
With the adjuster fully turned lightly in direction
a
16 clicks
out out
Minimum Standard
7 clicks
out
1 click
Maximum
U8FA11.book Page 25 Thursday, April 3, 2003 4:09 PM