OWNER'S MANUAL
IMPORTANT SAFETY INSTRUCTIONS & CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN '------------' 1 2 3 4 5 6 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS FCC INFORMATION (for US customers) IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest perfonnance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.
CONTENTS " INTRODUCTION FEATURES SUPPLIED ACCESSORIES CONTROLS AND FUNCTIONS Front panel Front panel display Rear panel Remote control. Installing batteries in the remote control Using the remote control 2 2 3 3 5 6 7 8 8 PREPARATION CONNECTIONS Connecting speakers Connecting the AM and FM antennas Connecting the power supply cord Turning on and off this unit.. 9 10 11 13 14 OPERA.
FEATURES Built-in 2-channel power amplifier • Minimum RMS output power 50 W + 50 W (8 n), 0.
CONTROLS AND FUNCTIONS 2 11 <+>VAMAHA 1 2 3 4 5 6 7 !============~~! "ASS TRel!lLe I!IALANCe 2.'0':".2 2·'0':".2 ~. .~ '~ .. '5 : ' 30 '~ .. .~ '5 : ' 2·'D·FL~T::-, .~~. '5~' ' : .. Dh LOUDNess 2~'O':".2 30 ~ 8 " .8 .. '7 '8 I I ! ~ ~ I (U.S.A. and Canada models) ~ 16 CD STANDBY/ON Turns on this unit or sets it to the standby mode. See page 14 for details.
CONTROLS AND FUNCTIONS @ VOLUME Increases or decreases the sound output level. This does not affect the OUT (REC) level. @ INPUT selector Selects the input source you want to listen to. @ AlBICIDIE Selects the preset station group (A to E) when TUNER is selected as the input source (see page 22). @ PHONES jack Outputs audio for private listening with your headphones. Press SPEAKERS A and B so that the SP AlB indicators tum off before you connect your headphones to the PHONES jack.
CONTROLS AND FUNCTIONS cp 2 CfJ I ~ ~A ~ I~ B 00000 00000 00000 00000 00000 00000 00000 ® CV I I I I 1 cp ~ ~ ~ I TAPE MON MEMORY AUTO TUNED STEREO SLEEP MUTE 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 CD SP (SPEAKERS) AlB indicators
CONTROLS AND FUNCnONs ® (U.S.A. and Canada models) I AUDIO OO I~ AUXOO comvo 1":"00 I ~~)OO I:::00 ~ (~~)OO l S \9 ICC I ~ I! CD Antenna terminals Connect FM and AM antennas. See page 11 for connections information. ® AUDIO jacks Connect audio components. See page 9 for connection information. @ REMOTE jacks These jacks are used to input/output remote control signals. See page 13 for connection information. @ PHONO jacks and GND terminal Connect a turntable.
CONTROLS AND FUNCTIONS This section describes the function of each button on the remote control used to control this unit or other components made by YAMAHA. The functions of the buttons used to control your other audio components are the same as those of the corresponding buttons on those components. Refer to those components' instruction manuals for details.
CONTROLS AND FUNCTIONS .. Notes on batteries • • • • • • Change all of the batteries if the operation range of the remote control decreases. Use AAA, R03, UM-4 batteries for the remote control. Make sure that the polarities are correct. See the illustration inside the battery compartment of each remote control. Remove the batteries if the remote control is not used for an extended period of time. Do not use old batteries together with new ones.
CONNECTIONS CAUTION • Do not connect this unit or other components to the main power until all connections between components are complete. • Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage this unit and! or the speakers. • All connections must be correct: L (left) to L, R (right) to R, "+" to "+" and "-" to "-".
CONNECTIONS Be sure to connect the left channel (L), right channel (R), "+" (red) and "-" (black) properly. CAUTION Before connecting the speakers, make sure that the power of this unit is off. • 1 Remove approximately 10 mm (3/8 in) of insulation from the end of each speaker cable and twist the exposed wires of the cable together to prevent short circuits. 10 Connecting the banana plug (U.S.A.
CONNECTIONS Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals. Outdoor AM antenna Use a 5 to 10 m of vinylcovered wire extended outdoors from a window. Indoor FM antenna (included) Outdoor FM antenna AM loop antenna (included) o I " ...
CONNECTIONS • 1 Connecting the AM loop antenna Repeat steps 2 to 4 to insert the AM loop antenna lead wires into the GND terminal. 6 Orient the AM loop antenna for the best reception. Set up the AM loop antenna. 2 Press and hold the tab. 3 Insert the AM loop antenna lead wires into the AM ANT terminal. 4 Release the tab. 12 5 • The AM loop antenna should be placed away from this unit. • A properly installed outdoor antenna provides clearer reception than an indoor one.
CONNECTIONS • VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging the power supply cord into the AC wall outlet. Voltages are as follows: Asia model AC 220/230-240 V, 50/60 Hz General model AC 110/120/220/230-240 V, 50/60 Hz Plug the power supply cord into the AC wall outlet after all other connections are complete.
CONNECTIONS 1 When all connections are complete, tum on the power of this unit. Press STANDBY/ON on the front panel (or POWER on the remote control) to turn on this unit. 1 or Front panel Remote control Press STANDBY/ON on the front panel (or STANDBY on the remote control) to set this unit to the standby mode.
PLAYING AND RECORDING CAUTION Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player before you play back a CD encoded in DTS.
PLA YING AND RECORDING A'tllfJ3ll~fj'~~_(@~~#IJ'!~lflM • Adjusting the BALANCE control Adjusts the sound output balance of the left and right speakers to compensate for sound imbalance caused by speaker locations or listening room conditions.
PLA YING AND RECORDING 3 • The VOLUME, BASS, TREBLE, BALANCE and LOUDNESS controls and the PURE DIRECT buttons have no effect on the source being recorded. • Check the copyright laws in your country to record from records, CDs, radio, etc. Recording copyright-protected material may infringe on copyright laws. Rotate VOLUME on the front panel (or press VOLUME +/- on the remote control) to adjust the sound output level of the selected source to record from.
PLA YING AND RECORDING 4 Use this feature to automatically set this unit to the standby mode after a certain amount of time. The SLEEP timer is useful when you are going to sleep while this unit is playing or recording a source. The SLEEP timer also automatically turns off any external components connected to the AC OUTLETS. 3 1 Press SLEEP repeatedly so that SLEEP OFF appears in the front panel display. Sl.
PLA YING AND RECORDING 1 Press MUTE on the remote control to mute the sound output. The MUTE indicator flashes in the front panel display. t 2 Press MUTE on the remote control again to resume the sound output. The MUTE indicator disappears from the front panel display.
FM/AM TUNING There are 2 tuning methods; automatic and manual. Select either method according to your preference and the strength of station signals. 4 Automatic tuning is effective when station signals are strong and there is no interference. Press TUNING once to begin automatic tuning. Press l> to tune into a higher frequency. Press
FM/AM TUNING Manual tuning is effective when station signals are weak. 2 4 3 1 1 Rotate the INPUT selector (or press TUNER on the remote control) to select TUNER as the input source. You can use the automatic preset tuning method to automatically store FM stations. This function enables this unit to automatically tune into FM stations with strong signals and store up to 40 (8 stations in each of the 5 groups, A 1 to E8) of those received stations in order.
FM/AM TUNING • 2 Press FM/AM on the front panel to select FM as the reception band. PM appears in the front panel display. Customized automatic preset tuning You can specify a preset station group and a preset station number from which this unit stores the PM stations received by automatic preset tuning. FMlAM ~ 3 Press and hold MEMORY on the front panel for more than 3 seconds. The preset station group and the MEMORY and AUTO indicators flash in the front panel display.
FM/AM TUNING 4 You can also manually store up to 40 stations (8 stations in each of the 5 groups, A 1 to E8). You can then easily recall any preset stations by selecting the preset station numbers where they are stored. Press one of the preset station number buttons on the front panel to select a preset station number (1 to 8) where you want to store the station. 2,5 This operation must be done within 5 seconds while the MEMORY indicator is flashing in the front panel display.
FM/AM TUNING You can tune into the desired station simply by selecting the preset station number where it is stored. You can exchange the assignment of two preset stations with each other. The following procedure describes an example where a preset station E I is exchanged with another preset station A5. 2,4 2 1 1 Press AlBICIDIE on the front panel repeatedly (or on the remote control) to select a preset station group (A to E). The selected preset station group is shown in the front panel display.
ADVANCED SETUP • ADVANCED SETUP menu parameters Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. Factory presets PF.:E5ET Use to reset all parameters to the factory presets. Choices: CANCEL, RESET • Select CANCEL if you do not want the parameters of this unit to be initialized when you reset the factory presets. • Select RESET if you want all of the parameters of this unit to be initialized when you reset the factory presets.
ADVANCED SETUP 3 (Asia and General models on Iy) Press the preset station number buttons (1 and 2) on the front panel to move through the menu and select the parameter you want to adjust. See page 25 for available parameters. 4 Press AlBICIDIE on the front panel repeatedly to toggle between the available parameters. 5 Press STANDBYION to confirm your setting. @ ~ The settings you made are reflected next time you turn on this unit.
TROUBLESHOOTING Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. • General Problem This unit fails to turn on. Cause Remedy See page The power supply cord is not connected or the plug is not completely inserted. Connect the power supply cord firmly.
TROUBLESHOOTING The sound is degraded when listening with the headphones connected to the CD player or the tape deck connected to this unit. The power of this unit is turned off, or this unit is set to the standby mode. The sound level is low. The LOUDNESS control is functioning. Set the LOUDNESS control to the FLAT position. The INPUT selector will not function though it is rotated. The TAPE MONITOR function is turned on. Tum off the TAPE MONITOR function.
TROUBLESHOOTING • Remote control Problem The remote control does not work nor function properly. Remedy Cause Wrong distance or angle. The remote control will function within a maximum range of 6 m (19.7 ft) and no more than 30 degrees off-axis from the front panel. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. Reposition this unit. The batteries are weak. Replace all batteries.
SPECIFICATIONS AUDIO SECTION FM SECTION • Minimum RMS Output Power (8 Q , 20 Hz to 20 kHz, 0.04% THO) • Tuning Range [U.S.A. and Canada models] [Asia and General models] [Other models] 50 W + 50 W • Dynamic Power (IHF) (8/6/4/2 Q) 70177/89/100 W • Maximum Output Power [Europe model only] (I kHz, 0.7% THO, 4 Q) • IEC Output Power [Europe model only] (l kHz, 0.04% THD, 8 Q) • Usable Sensitivity (lHF) 55 W 52 W • Power Band Width (0.
.YAMAHA This product mainly uses lead-free solder. © 2005 YAMAHA CORPORATION All rights reserved. YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE.• BUENA PARK. CALIF. 90620. U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO Ml S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEl HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD.
GYAMAHA RX-497/RX-397 Read the following instructions instead of "IMPORTANT SAFETY INSTRUCTIONS" (1 to 14 on page i) on the OWNER'S MANUAL. IMPORTANT SAFETY INSTRUCTIONS I Read Instructions - All the safety and operating instructions should be read before the product is operated. Retain Instructions - The safety and operating instructions 2 should be retained for future reference. Heed Warnings - All warnings on the product and in the 3 operating instructions should be adhered to.
20 21 22 23 24 Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
YAMAHA Home Audio products are designed and manufactured to provide a high level of trouble-free performance. YAMAHA Electronics Corporation, USA, is proud of the experienced craftsmanship that goes into each and every YAMAHA Home Audio product. YAMAHA sells its Home Audio products only through a network of high quality, specially authorized dealers and is pleased to offer the following Limited Warranty, which applies only to products purchased from our authorized dealers.