Owner’s Manual AV Receiver English for Canada
BEFORE USE MAIN ZONE 2 CODE SET About this manual SOURCE RECEIVER Language selection AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI • Some features are not available in certain regions. • This manual is created prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority. • “jON SCREEN” (example) indicates the name of the parts on the remote control.
CONTENTS INTRODUCTION Features and capabilities ................................................... 5 Using the TV OSD to operate the unit ............................. 6 Basic operation of OSD menu.......................................... 6 Viewing or modifying content for the current input source ............... 6 Configuring settings for this unit ...................................................... 6 Adjust settings for each input source
SETUP Configuring input sources (Input menu) ....................... 78 Configuring input sources .............................................. 78 Input menu...................................................................... 79 Editing the SCENE function (Scene menu) ................... 81 Editing a scene................................................................ 81 Scene menu..................................................................... 82 Simple registering as the SCENE....................
INTRODUCTION Features and capabilities ■ Built-in high-quality, high-power 7-channel amplifier ■ Playback of music on the USB storage devices ................................................... 65 ■ Multi-channel speaker configuration capability ■ Sophisticated on-screen display (OSD) for easy operation – – – – – 2- to 7.1-channel speaker configurations .................................................................................................
INTRODUCTION Using the TV OSD to operate the unit This unit features a sophisticated on-screen display (OSD) for the TV screen. The OSD is designed to enable visual guidance that simplifies operations. The OSD mainly displays the ON SCREEN and Option menus, as well as the content window that displays the content of current input sources.
INTRODUCTION Using the TV OSD to operate the unit ■ Adjust acoustic parameters to match your speakers and listening environment – Specify speaker acoustic parameters automatically (Yamaha Parametric Room Acoustic Optimizer - YPAO).......................................................................38 – Set up this unit’s speaker configuration simply ..................................................91 – Specify settings for each speaker .................................
INTRODUCTION Part names and functions c Front panel display Front panel Displays information on this unit (☞p. 11). d PURE DIRECT a MAIN ZONE A (Power) Switches this unit between on and standby mode. e b HDMI Through/iPod Charge indicator Lights up in any of the following cases while the unit is in standby mode. • When the Standby Through function is enabled and audio/video from an external component connected with HDMI is output to a TV during standby mode (☞p. 98).
INTRODUCTION Part names and functions Front panel with the cover opened m MULTI ZONE g ON SCREEN Turns on and off the ON SCREEN menu. h OPTION Turns on and off the Option menu (☞p. 55). i TONE/BALANCE j k l Adjusts high-frequency/low-frequency output of speakers/headphones in each zone (☞p. 46, p. 120). Adjusts the balance of the volume of the left and right channels in Zone2 (☞p. 120). STRAIGHT Changes a sound program to straight decoding mode (☞p. 49). PROGRAM l / h Selects a sound program (☞p.
INTRODUCTION Part names and functions Rear panel g HDMI input jacks a PHONO jacks h b c d e f For connecting a turntable (☞p. 32). DOCK jack For connecting an optional Universal Dock for iPod (such as YDS12), Wireless System for iPod (YID-W10), or Bluetooth Wireless Audio Receiver (YBA-10) (☞p. 70, p. 72, p. 74). NETWORK port For connecting to the network (☞p. 35). HDMI OUT 1-2 jacks For connecting an HDMI - compatible TV to output audio/video signals (☞p. 26). MON.
INTRODUCTION Part names and functions h ENHANCER indicator Front panel display i a Tuner indicator Light up according to the status of a received station (☞p. 60). b ZONE2 indicator c d e f g j Lights up when the audio and video output to Zone2 is enabled (☞p. 120). SLEEP indicator Blinks when the sleep timer is on (☞p. 12, p. 120). PARTY indicator Lights up when the party mode is active (☞p. 100). Multi information display Displays a range of information on menu items and settings.
INTRODUCTION Part names and functions a Remote control signal transmitter Remote control j ON SCREEN Transmits infrared signals. Turns on and off the ON SCREEN menu. b MAIN/ZONE2 Switches the zone to be operated by the remote control between the Main zone and Zone2 (☞p. 120). a MAIN ZONE 2 CODE SET b SOURCE RECEIVER Select an input source on this unit from which to playback.
INTRODUCTION Part names and functions k Cursor B / C / D / E, ENTER, RETURN Remote control (sequel) MAIN ZONE 2 CODE SET o p q SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX USB 2 3 NET MULTI m Numeric keys Enter numbers. 4 n TV control keys DOCK Operate a monitor such as a TV. HDMI OUT TUNER FM TUNING p SOURCE/RECEIVER MEMORY ENHANCER SUR.
INTRODUCTION Part names and functions On-screen display When a TV is connected to this unit, the supplied remote control can be used to specify and verify this unit’s settings via menus and options displayed on the TV screen. The following displays are available in the on-screen display. ON SCREEN menu Option menu Content window Press jON SCREEN to display the ON SCREEN menu. Press dInput selector to display the content window. Detailed settings for this unit can be configured.
CONNECTIONS Connecting speakers This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and connections in your listening environment. Speaker channels and functions ■ Front left and right speakers The front speakers are used for the front channel sounds (stereo sound) and effect sounds.
CONNECTIONS Connecting speakers Speaker layout ■ Enjoying the 7.1 channel audio source ■ 7.1-channel speaker layout (7 speakers + subwoofer) In addition to the 7.1-channel speaker layout, a variety of speaker configurations can be specified with presence speaker connection, bi-amp connection or the Zone2 function. And, this unit is equipped with “Power Amp Assign” function which can easily apply the appropriate speaker setting to this unit according to your speaker configuration.
CONNECTIONS Connecting speakers ■ Adding the presence speakers for a richer sound field effect ■ Enjoying the audio source without surround back speakers ■ Presence speaker layout (7 speakers + subwoofer + presence speakers) ■ 5.
CONNECTIONS Connecting speakers ■ Using the front speakers that support bi-amp connections for a ■ Using speakers in two rooms (Zone2 function) ■ 5.1-channel speaker layout (Front speakers (Bi-amp) + 3 speakers) ■ 7.
CONNECTIONS Connecting speakers Connecting speakers and subwoofers Connect your speakers to their respective terminals on the rear panel. CAUTION • Remove the power cable of this unit from the power outlet before connecting the speakers. • Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity.
CONNECTIONS Connecting speakers ■ Bi-amp connection This unit can be connected to speakers that support bi-amp connections. When connecting speakers, connect the FRONT jacks and the SURROUND BACK/BI-AMP jacks as in the diagram below. Configure the bi-amp settings to activate connections. ■ Changing speaker impedance ■ Multi-zone audio system using the internal amplifier of this unit Connect the speakers in the second zone to the EXTRA SP jacks as in the diagram below. 1 2 ZONE2/ F.
CONNECTIONS Connecting speakers 3 Check that “SPEAKER IMP.” is displayed on the front panel. 4 5 SPEAKER IMP. 8 MIN Press STRAIGHT repeatedly to select a “6ΩMIN.” ■ Connecting speakers This type of jack can connect to the following speakers or connection.
CONNECTIONS Connecting speakers ■ Connecting the subwoofers PRE OUT (SIN G 2 LE) 1 Set the subwoofer volume as follows. Volume: Set to approximately half volume (or slightly less than half). Crossover frequency (if available): Set to maximum. 2 SURR UND SUR. BACK CEN VOLUME SUBW OOFE R CEN TER TER FRO 1 CROSSOVER/ HIGH CUT NT Connect the subwoofer input jack to the SUBWOOFER 1 and/or 2 jack on this unit with an audio pin cable.
CONNECTIONS Advanced speaker configuration Speaker layout utilizing an external power amplifier More speakers can be used by connecting an external amplifier to this unit’s PRE OUT jacks. The speaker layout specified using the Power Amp Assign function varies when an external amplifier is connected. ■ Using front speakers that support bi-amp Connecting an external amplifier ■ 7.
CONNECTIONS Connecting external components Jacks and cables S-VIDEO jacks This unit is equipped with the following input/output jacks. Use jacks and cables appropriate for components that you are going to connect. To transmit S-video signals that include luminance These jacks transmit conventional analog video (Y) and chrominance (C) components. signals. Use S-video cables. Use video pin cables.
CONNECTIONS Connecting external components Connecting a TV monitor When connecting to a non-HDMI compatible TV This unit is equipped with the following four types of output jack for connection to a TV. HDMI OUT 1-2, COMPONENT VIDEO, S-VIDEO or VIDEO. Select the proper connection according to the input signal format supported by your TV.
CONNECTIONS Connecting external components ■ Connecting an HDMI video monitor ■ Connecting a component video monitor J1 Connect the HDMI cable to one of the HDMI OUT 1-2 jacks. Connect the component video cable to the COMPONENT VIDEO (MONITOR OUT) jacks.
CONNECTIONS Connecting external components ■ Connecting a video monitor J1 When using other TVs Connect the video pin cable to the VIDEO (MONITOR OUT) jack. DOCK NETWORK HDMI OUT 2 1 ARC AV 1 AV 2 AV 3 AV 4 (1 BD/DVD) SELECTABLE AV 1 TV audio output A (1 BD/DVD) ARC COMPONENT ZONE OUT AV OUT To transmit sound from the TV to this unit, connect the TV’s audio output to the AUDIO1-4 jacks.
CONNECTIONS MAIN Connecting external components ZONE 2 CODE SET Connecting BD/DVD players and other devices SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 USB NET MULTI DOCK This unit has the following input jacks. Connect them to the appropriate output jacks on the playback devices such as BD/DVD players.
CONNECTIONS Connecting external components ■ Connecting BD/DVD players and other devices with component video cables Using analog stereo audio output sources Connect the playback device to the AV1, AV2, AV3 or AV4 jacks. Connect the device with a component video cable to one of the AV1-4 input jacks. Component video / Audio output Using optical digital audio output sources DOCK Connect the playback device to the AV3 or AV4 jacks.
CONNECTIONS Connecting external components ■ Connecting BD/DVD players and other devices with S-video Using analog stereo audio output sources Connect the playback device to the AV1, AV2, AV3 or AV4 jacks. cables Connect the playback device with a S-video cable to one of the AV1-4 input jacks. DOCK Using optical digital audio output sources NETWORK HDMI OUT 2 1 ARC Connect the playback device to the AV3 or AV4 jacks.
CONNECTIONS Connecting external components ■ Connecting BD/DVD players and other devices with video cables Connect the playback device with a video pin cable to one of the AV1-4 input jacks. Using analog stereo audio output sources Connect the playback device to the AV1, AV2, AV3 or AV4 jacks. Using optical digital audio output sources DOCK NETWORK Connect the playback device to the AV3 or AV4 jacks.
CONNECTIONS Connecting external components ■ Connecting CD players and other audio devices Using coaxial digital output sources Connect the playback device to the AUDIO2 jack. Using analog stereo output sources Connect the playback device to the AUDIO1, AUDIO2, AUDIO3 or AUDIO4 jacks. DOCK NETWORK HDMI OUT 2 1 ARC DOCK NETWORK AV 1 HDMI OUT 2 1 ARC SELECTABLE AV 2 AV 3 AV 4 (1 BD/DVD) AV 1 SELECTABLE AV 1 COMPONE MON.
CONNECTIONS Connecting external components Connecting game consoles or video camcorders Connecting a multi-format player or an external decoder Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as a game console or video camcorder to the receiver. Select the V-AUX input to use these connected devices. This unit has 8 sets of input jacks (FRONT L/R, CENTER, SURROUND L/R, SUR. BACK and SUBWOOFER) to input multi-channel analog sound signals.
CONNECTIONS Connecting external components Connecting a SCENE link playback-compatible device Using the Trigger function to link external component power When the components are the Yamaha products and have the capability of the transmission of the remote control signals, connect the REMOTE IN and REMOTE OUT jacks to the remote control input and output jack with the monaural analog mini cable as follows.
CONNECTIONS Connecting external components Connecting audio/video recording devices Connecting to the network This receiver can transmit selected incoming audio/video signals to external components through the AV OUT jacks. You can record these input audio and video signals to VCRs or similar devices, or send them to other TVs or external components.
CONNECTIONS Connecting external components Connecting a USB storage device Connect a USB memory device or USB portable audio player to the USB port on the front panel of this unit. USB memory device or USB portable audio player NOTE Be careful that the USB storage device is facing the correct way when inserted into the USB port of this unit.
CONNECTIONS Connecting the FM/AM antennas An indoor FM antenna and an AM loop antenna are supplied with this receiver. Connect these antennas properly to their respective jacks. AM loop antenna Position the AM antenna away from the receiver. The wires of the AM antenna have no polarity. You can connect either wire to the AM jack or the GND jack.
CONNECTIONS Setting up the speaker parameters automatically (YPAO) This unit is equipped with a Yamaha Parametric Room Acoustic Optimizer (YPAO) that adjusts the configuration, size, and volume balance of the speakers in order to provide an optimal sound field. Using YPAO allows you to automatically configure settings, such as adjusting speaker output and acoustic parameters to suit your listening room (the room in which this unit is placed). J1 Be aware of the following when using YPAO.
CONNECTIONS MAIN Setting up the speaker parameters automatically (YPAO) ZONE 2 CODE SET SOURCE RECEIVER 4 AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI Connect the YPAO microphone to the YPAO MIC jack on the front panel. AUDIO TUNER FM 5 Press kCursor B / C to select the “Multi Position” and press kENTER to set the number of listening positions to measure. HDMI OUT To measure at the multiple listening positions (up to 8), press kCursor B / C to select “Yes” and press kENTER.
CONNECTIONS MAIN Setting up the speaker parameters automatically (YPAO) ZONE 2 CODE SET When “Multi Position” is set to “No” in step 5 The following display appears when measurement finishes without any problems. SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 AUDIO 3 USB NET MULTI TUNER SIRIUS PHONO YPAO 4 DOCK M e a s u r e . F i n i s h Save/Exit Auto measurement restarts in 10 seconds.
CONNECTIONS MAIN Setting up the speaker parameters automatically (YPAO) ZONE 2 CODE SET SOURCE RECEIVER Result AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 USB NET MULTI DOCK AUDIO Save/Exit Displays the results of automatic acoustics measurement. Refer to “Reviewing automatic setup parameters” (☞p. 42) for details. SAVE Applies the result to the speaker setup and finishes the automatic measurement. J1 CANCEL Returns to the previous screen.
CONNECTIONS MAIN Setting up the speaker parameters automatically (YPAO) ZONE 2 CODE SET ■ Reviewing automatic setup SOURCE RECEIVER parameters AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 USB NET MULTI DOCK The results of automatic acoustics measurement can be reviewed once measurement is complete. AUDIO 1 HDMI OUT TUNER PHONO FM AM INFO MEMORY PRESET MUSIC SLEEP PARTY Wiring The Result menu can be viewed only by performing the automatic measurement.
CONNECTIONS MAIN Setting up the speaker parameters automatically (YPAO) ZONE 2 CODE SET ■ When an error message is SOURCE RECEIVER displayed during measurement AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI AUDIO See “Error messages” (☞p. 44) for instructions on resolving the problem and measure acoustics again. 4 3 4 Press kCursor E to select “RETRY.” Press kENTER to use YPAO again. ■ When a warning message is displayed after measurement See “Warning messages” (☞p.
CONNECTIONS Setting up the speaker parameters automatically (YPAO) ■ Message list E-8: No Signal NOTE The YPAO microphone could not distinguish a test tone. Check that each speaker has been connected and installed correctly. If the following messages appear, resolve the problems that have occurred and carry out the measurement process again. The YPAO microphone or the YPAO MIC jack may be broken. Inquire at the retailer where you purchased this unit, or the nearest Yamaha service center.
PLAYBACK MAIN ZONE 2 CODE SET Basic playback procedure SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI AUDIO 4 DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY PRESET d r 1 2 ENHANCER SUR. DECODE MUSIC SLEEP PARTY 1 2 3 4 BD/DVD TV CD RADIO Use the dInput selector to select the input source. 4 Press uVOLUME +/- to adjust the volume. To mute the output. Press vMUTE to mute the audio output. Press vMUTE again to unmute.
PLAYBACK Basic playback procedure ■ Adjusting high/low-frequency sound (Tone control) You can adjust the balance of the high-frequency range (Treble) and low-frequency range (Bass) of sounds output from the front left and right speakers to obtain desired tone. The tone control of the speakers or headphones can be set separately. Set the headphone tone control with the headphones connected. 1 Press TONE/BALANCE on the front panel repeatedly to select “Treble” or “Bass.
PLAYBACK Changing input settings with a single key (SCENE function) This unit has a SCENE function that allows you switch this unit on and change input sources, the settings of Audio Select, HDMI Output, Sound Program, Pure Direct Mode, Tone Control, Adaptive DRC, and Compressed Music Enhancer with one key. Selecting the SCENE suitable for the external component At initial factory settings, SCENE functions are configured for the following components.
PLAYBACK MAIN ZONE 2 CODE SET Enjoying favorite sound field effect SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 USB NET MULTI DOCK AUDIO HDMI OUT TUNER FM Selecting sound programs and sound decoders AM TUNING MEMORY ENHANCER SUR. DECODE MOVIE MUSIC SLEEP PARTY 1 2 3 4 BD/DVD TV CD RADIO STRAIGHT PURE DIRECT Turning on Straight decoding mode (☞p.
PLAYBACK MAIN Enjoying favorite sound field effect ZONE 2 CODE SET SOURCE RECEIVER 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI AUDIO 4 DOCK HDMI OUT TUNER ■ Enjoying more spatial sound fields ■ Enjoying sound programs without CINEMA DSP 3D mode creates an intensive and accurate stereoscopic sound field in the listening room. Connection of presence speakers is recommended to take full advantage of the effects of CINEMA DSP 3D mode. Do the following steps.
PLAYBACK MAIN Enjoying favorite sound field effect ZONE 2 CODE SET Enjoying Hi-Fi Sound Quality (Pure Direct Mode) SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI Use Pure Direct Mode to enjoy the pure high fidelity sound of the selected source. When Pure Direct Mode is enabled, this unit plays back the selected source with the least circuitry. J1 AUDIO 4 DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY PRESET Press sPURE DIRECT to turn Pure Direct Mode on.
PLAYBACK Enjoying favorite sound field effect Sound programs ■ Category: ENTERTAINMENT Sound programs are optimized for video sources such as TV programs and games. in the table indicates the sound program for CINEMA DSP. Sports This program allows the listeners to enjoy stereo sport broadcasts and studio variety programs with enriched live feeling.
PLAYBACK Enjoying favorite sound field effect ■ Category: MOVIE ■ Category: STEREO Sound programs optimized for viewing video sources such as movies. Sound programs are optimized for listening to stereo sources. Standard This program creates a sound field emphasizing the surround feeling without disturbing the original acoustic positioning of multi-channel audio such as Dolby Digital and DTS.
PLAYBACK MAIN ZONE 2 Controlling this unit while viewing the TV screen CODE SET SOURCE RECEIVER This unit features a sophisticated on-screen display (OSD) that helps you to control the amplifier function of this unit. With the OSD, you can view information of the signals being input and the status of this unit. Visual guidance simplifies operations for menus.
PLAYBACK MAIN Controlling this unit while viewing the TV screen ZONE 2 CODE SET ■ Selecting a sound program SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI 1 AUDIO Use kCursor B / C to select “Sound Program” and press kENTER. 4 DOCK NOTES Menus can be operated and the status of this unit confirmed from the following three main displays. • ON SCREEN menu (☞p. 78) • Option menu (☞p. 55) • Content window (☞p.
PLAYBACK MAIN ZONE 2 Configuring settings specific to an individual input source (Option menu) CODE SET SOURCE RECEIVER This unit has a unique Option menu for each input source. Option menus can be used to enable features such as volume trim for compatible input sources or to display audio/video data. AV 1 2 3 4 7 V-AUX 5 6 1 2 3 4 USB NET MULTI DOCK AUDIO d HDMI OUT TUNER Option menu operations are displayed on the front panel display or TV screen.
PLAYBACK Configuring settings specific to an individual input source (Option menu) Option menu The following items are provided for each input source. “✓” indicates the available menu for each input source.
PLAYBACK Configuring settings specific to an individual input source (Option menu) ■ Adjusting high/low-frequency sound Tone Control ■ Enjoying more spatial sound fields CINEMA DSP 3D Mode You can adjust the balance of the high-frequency range (Treble) and low-frequency range (Bass) of sounds output from the front left and right speakers to obtain desired tone. Adjustable range -6.0 dB to +6.0 dB Adjustment increments 0.
PLAYBACK Configuring settings specific to an individual input source (Option menu) ■ Adjusting volume between input sources Volume Trim ■ Shuffle playback Shuffle Reduces any change in volume when switching between input sources by correcting volume differences in each input source. You can adjust this parameter for each input source. Pairing Plays back songs or albums in random order. When the shuffle function is enabled, “ ” appears on the TV screen. J1 Off The shuffle function is turned off. -6.
PLAYBACK MAIN ZONE 2 Confirming and operating input sources from the content window CODE SET SOURCE RECEIVER When USB, NET, DOCK or TUNER is selected, the content window is displayed on the TV screen. Playback style for iPod, functions for FM/AM tuner, Internet Radio, PC, and USB can be set in the content window. AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI AUDIO 4 DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY PRESET TUNING ENHANCER SUR.
PLAYBACK MAIN ZONE 2 FM/AM tuning CODE SET SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI AUDIO 4 d DOCK Selecting a frequency for reception (Normal tuning) HDMI OUT TUNER PHONO FM AM INFO MEMORY PRESET TUNING ENHANCER SUR. DECODE MOVIE MUSIC SLEEP PARTY 1 2 3 4 BD/DVD TV CD RADIO e STRAIGHT PURE DIRECT SCENE ON SCREEN OPTION Press dTUNER to switch to the tuner input. Press eFM or eAM to select a band to receive.
PLAYBACK MAIN FM/AM tuning ZONE 2 CODE SET Navigating the FM/AM tuner from the content window SOURCE RECEIVER ■ Designating a preset number for registration AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI Press eMEMORY once, to display “Manual Preset” on the front panel display. After a small wait, the preset number that the station has been registered to will appear. J1 AUDIO 4 DOCK HDMI OUT TUNER d PHONO Preset number FM AM INFO MEMORY PRESET TUNING Blinks ENHANCER SUR.
PLAYBACK MAIN FM/AM tuning ZONE 2 CODE SET ■ Operating from the Browse view SOURCE RECEIVER Preset Select AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 Preset - Selects the previous preset number. USB NET MULTI DOCK Preset + Selects the next preset number. Preset -8 Returns the previous page. Preset +8 Goes to the next page. Memory Registers the station currently received as a preset station. Up to 40 FM/AM stations can be registered.
PLAYBACK MAIN ZONE 2 Playing back tunes on the PC CODE SET SOURCE RECEIVER You can enjoy playback of audio files stored on PCs connected to this unit via your network. To play back audio files on your PC, you need to install Windows Media Player on the PC and configure the media sharing setting of Windows Media Player.
PLAYBACK MAIN Playing back tunes on the PC ZONE 2 CODE SET ■ Operating from the Now Playing SOURCE RECEIVER view AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI a b c AUDIO AM INFO MEMORY PRESET Play Control Operates the basic playback functions of PC. DOCK PHONO FM To use these buttons, first press kENTER. Then select the desired one with kCursor B / C and kENTER. 4 HDMI OUT TUNER Screen buttons on the Now Playing view TUNING f ENHANCER SUR.
PLAYBACK MAIN ZONE 2 Playing back tunes on the USB storage devices CODE SET SOURCE RECEIVER You can enjoy playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC and FLAC files stored on your USB memory device or USB portable player connected to the USB port on the front panel of this unit. This unit supports USB mass storage class devices (FAT 16 or FAT 32 format, except USB HDDs).
PLAYBACK MAIN Playing back tunes on the USB storage devices ZONE 2 CODE SET ■ Operating from the Now Playing SOURCE RECEIVER view AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI 4 DOCK HDMI OUT PHONO FM AM INFO MEMORY PRESET TUNING f ENHANCER SUR.
PLAYBACK MAIN ZONE 2 Listening to the Internet Radio CODE SET SOURCE RECEIVER You can listen to Internet Radio stations using the vTuner Internet Radio station database service particularly customized for this unit, providing a database of over 2000 radio stations. Also, you can store your favorite stations with bookmarks. AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 USB NET MULTI DOCK AUDIO d HDMI OUT TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET TUNING ENHANCER SUR.
PLAYBACK MAIN Listening to the Internet Radio ZONE 2 CODE SET ■ Operating from the Now Playing SOURCE RECEIVER view AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI Switches the display to the Browse view. a AUDIO ■ Operating basic playback functions 4 with the remote control DOCK Use the following remote control keys to operate (playback, stop) the Internet Radio. HDMI OUT TUNER PHONO FM AM INFO MEMORY PRESET TUNING f e b ENHANCER SUR.
PLAYBACK MAIN ZONE 2 Using shortcut function CODE SET SOURCE RECEIVER Use this feature to access the desired music sources (WAV, MP3 and WMA files on the connected PC or USB storage devices and Internet Radio Stations) directly. You can preset up to 40 items for above input sources. AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI AUDIO 4 DOCK HDMI OUT TUNER FM AM MEMORY PRESET TUNING e ENHANCER SUR.
PLAYBACK MAIN ZONE 2 Playing back tunes from your iPod™/iPhone™ CODE SET SOURCE RECEIVER Once you have connected a Universal Dock for iPod (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the remote control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound programs to give compressed audio formats such as MP3 a sharper, more dynamic sound (☞p. 50).
PLAYBACK MAIN Playing back tunes from your iPod™/iPhone™ ZONE 2 CODE SET Playing iPod™/iPhone™ from the menu screen (Menu browse control) SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 USB NET MULTI DOCK Screen buttons on the Browse view To use these buttons, first press kCursor E. Then select the desired one with kCursor B / C and kENTER.
PLAYBACK MAIN Playing back tunes from your iPod™/iPhone™ ZONE 2 CODE SET Screen buttons on the Now Playing view SOURCE RECEIVER To use these buttons, first press kENTER. Then select the desired one with kCursor B / C and kENTER. AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI Play Control AUDIO 4 DOCK d Operates the basic playback functions of iPod/iPhone.
PLAYBACK MAIN Playing back tunes from your iPod™/iPhone™ ZONE 2 CODE SET Use iPod/iPhone to start playback. Place the iPod/iPhone in the wireless transmitter. Setup is complete. SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI AUDIO iPod connected • When “iPod Interlock” → “Volume” in the Input menu is set to “Off,” the volume of this unit is not adjusted when iPod/iPhone volume controls are adjusted (☞p. 80).
PLAYBACK MAIN ZONE 2 Playing back tunes from Bluetooth™ components CODE SET SOURCE RECEIVER You can connect a Yamaha Bluetooth Wireless Audio Receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible portable music players. J1 AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 USB NET MULTI DOCK AUDIO HDMI OUT TUNER PHONO FM AM INFO MEMORY PRESET TUNING e ENHANCER SUR.
PLAYBACK MAIN Playing back tunes from Bluetooth™ components ZONE 2 CODE SET Using Bluetooth™ components SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI AUDIO 4 DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET When pairing is complete, perform the following procedure to achieve a wireless connection between this unit and the Bluetooth component. When the wireless d connection is complete, Bluetooth components can be played back.
PLAYBACK Controlling this unit by using the Web browser (Web Control Center) Displaying and Operating Web Control Center You can operate this unit by using a web browser. You can select the input source and sound field program, browse the iPod or network/USB contents, select the preset items, and adjust the parameters of this unit by using the graphical user interface (Web Control Center) that appears in the web browser. Check the IP address of this unit by using “IP Address” in “Network” menu (☞p.
PLAYBACK Controlling this unit by using the Web browser (Web Control Center) Zone control menu You can control the selected zone. Settings menu You can make various settings regarding the web browse control. c a a d b c d e f e b f g h a PLAY INFO Controls the selected input for each zone. a Zone Rename b TOP MENU c d e f Returns to the top menu. SCENE keys Selects the scene. POWER Turns on/off the power for the selected zone. You can also set the sleep timer for the selected zone.
SETUP MAIN ZONE 2 CODE SET Configuring input sources (Input menu) SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 USB NET MULTI DOCK Settings, such as the name of an input source or the icon displayed for an input source can be changed from the Input menu. Configuring input sources AUDIO HDMI OUT TUNER FM The name of an input source and its icon, as well as other input source settings, can be changed from the Input menu displayed on the TV screen.
SETUP MAIN Configuring input sources (Input menu) ZONE 2 CODE SET Input menu SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI ✓: AUDIO AV1-7 V-AUX AUDIO1-4 PHONO MULTI CH USB Rename/Icon Select ✓ ✓ ✓ ✓ ✓ ✓ Decoder Mode ✓ ✓ ✓ Enhancer ✓ ✓ ✓ 4 DOCK PC NET RADIO available menu for each input source DOCK (iPod) DOCK (Bluetooth) ✓ ✓ ✓ ✓ TUNER HDMI OUT TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET TUNING ✓ ✓ ✓ ✓ ✓ ✓
SETUP Configuring input sources (Input menu) ■ Setting the format of digital audio signals ■ Using a PC to control this unit over a network Decoder Mode Sets the format of digital audio to playback to DTS. For example, if the format is not automatically detected correctly even during playback of DTS format audio, this item can be used to set the playback format to DTS. Auto (Default) DTS The audio format is automatically selected to match the format of the input audio. Selects DTS signals only.
SETUP MAIN ZONE 2 Editing the SCENE function (Scene menu) CODE SET SOURCE RECEIVER The SCENE function (☞p. 47) can be edited from the Scene menu displayed on the TV screen. AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI Editing a scene AUDIO 4 Various settings, such as the name of a scene or the icon displayed for a scene, can be changed from the Scene menu.
SETUP Editing the SCENE function (Scene menu) Scene menu ■ Registering SCENE function settings Save SCENE1 Save Load Rename/Icon Select Reset SCENE3 Save Load Rename/Icon Select Reset SCENE4 Save Load Rename/Icon Select Reset Input ✓ Displays the “Input” and “Audio Select” settings registered with the SCENE function. ■ Adjusting settings registered with the HDMI Output ✓ Displays the HDMI output jack(s) registered with the SCENE function.
SETUP MAIN Editing the SCENE function (Scene menu) ZONE 2 CODE SET ■ Changing a scene name and icon SOURCE RECEIVER AV 1 2 3 4 7 V-AUX 5 6 1 2 3 USB NET MULTI AUDIO 4 Rename/Icon Select Changes the scene name and icon displayed on the front d panel display or TV screen. FM 1 2 PHONO AM PRESET INFO MEMORY MOVIE MUSIC SLEEP PARTY TUNING ENHANCER SUR. DECODE STRAIGHT PURE DIRECT Use kCursor B / C repeatedly to select “Rename/Icon Select” and press kENTER.
SETUP MAIN ZONE 2 Setting sound program parameters (Sound Program menu) CODE SET SOURCE RECEIVER Sound effects can be adjusted from the Sound Program menu. AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI Editing sound programs AUDIO 4 Adjust sound field elements (sound program parameters) to achieve sound effects suited to the acoustics of audio/ video sources or rooms if you are not satisfied with the results achieved with default sound program settings.
SETUP Setting sound program parameters (Sound Program menu) -6 dB to +3 dB Default setting 0 dB Adjust “DSP Level” as follows: Surround Room Size Surround Back Initial Delay Surround Back Room Size Initial delay. Presence, surround, and surround back sound field initial delay. Changes the apparent size of the sound field by adjusting the delay between the direct sound and the first reflection heard by the listener. The smaller the value, the smaller the sound field seems to the listener.
SETUP Setting sound program parameters (Sound Program menu) Reverb Time Surround Liveness Surround Back Liveness Liveness. Surround and surround back liveness. Adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early reflections decay. The early reflections of an audio source decay much faster in a room with acoustically absorbent wall surfaces than in one which has highly reflective surfaces.
SETUP Setting sound program parameters (Sound Program menu) Reverb Level Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the stronger the reverberation becomes. Level Adjustable range Parameters usable in certain sound programs 2ch Stereo only Direct 0 to 100% Automatically bypasses the DSP circuit and tone control circuit depending on the condition of tone control etc., when an analog audio source is played back. You can enjoy a higher quality sound.
SETUP Setting sound program parameters (Sound Program menu) Front Presence R Level Parameters usable in surround decoder Adjusts the volume of the front presence R channel. J1 Adjustable range 0 to 100% Default setting 33% Decode Type Selects a surround decoder. Pro Logic Reproduces sound using the Dolby Pro Logic decoder. This is suitable for all kinds of audio sources. PLIIx Movie / PLII Movie Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder.
SETUP MAIN ZONE 2 Setting various functions (Setup menu) CODE SET SOURCE RECEIVER Various settings, such as speaker volume or HDMI functions, can be changed from the Setup menu. AV 1 2 3 4 5 6 7 V-AUX 1 2 Operating the Setup menu AUDIO USB NET 3 MULTI 1 2 PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET Speaker Adjusts parameters for speakers, such as speaker status, and volume adjustment for each speaker (☞p. 90).
SETUP Setting various functions (Setup menu) Setup menu Manages settings for speakers Speaker Auto Setup Manual Setup Sound Lipsync Dynamic Range Max Volume Initial Volume Pure Direct Mode Adaptive DSP Level Video Analog to Analog Conversion Processing HDMI HDMI Control Control Select ARC (Audio Return Channel) TV Audio Input Audio Output Standby Through Network IP Address Network Standby MAC Address Filter Multi Zone Zone2 Set Monitor Out Assign Party Mode Set Zone Scene Rename Zone Rename Speaker
SETUP Setting various functions (Setup menu) Power Amp Assign In addition to the 7.1-channel speaker connection, various speaker configurations are possible using the presence speakers connection, bi-amp connection or multi-zone function (☞p. 19, p. 20). In the “Configuration,” you can select the speaker size characteristic (Large or Small). Select the size (sound reproduction capacity) that matches your speakers.
SETUP Setting various functions (Setup menu) Surround Back Selects the size of the surround back speakers. Largex1 Select when one large surround back speaker is connected. Largex2 Select when two large surround back speakers are connected. Smallx1 Select when one small surround back speaker is connected. Smallx2 (Default) Select when two small surround back speakers are connected. None Select this when no surround back speakers are connected.
SETUP MAIN Setting various functions (Setup menu) ZONE 2 CODE SET SOURCE RECEIVER Distance AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI Adjusts the timing at which the speakers produce audio so that sounds from the speakers reach the listening position at the same time. AUDIO 4 Selecting adjustment units DOCK HDMI OUT TUNER FM INFO Use kCursor B / C to select the unit for distance (meters or feet), and press kENTER.
SETUP Setting various functions (Setup menu) Test Tone Turns the test tone generator on or off. Off (Default) Does not generate test tones. On Generates test tones. While “On” is selected, test tones are produced constantly. You can use the test tone in a variety of circumstances. For example, you can adjust the volume balance settings for each speaker, or whenever you adjust the settings on the internal parametric equalizer, you can listen to the actual effect while operating this unit.
SETUP Setting various functions (Setup menu) ■ Auto-adjusting Dolby Digital and DTS dynamic range ■ Setting the startup volume Initial Volume Dynamic Range Selects the dynamic range adjustment method for audio bitstream (Dolby Digital and DTS) signal playback. Adaptive DSP Level Sets the initial volume for when this receiver is turned on. When this parameter is set to “Off,” the volume is set at the level when the receiver last entered standby mode.
SETUP Setting various functions (Setup menu) Setting this unit’s video output function ■ Analog-to-analog video conversion ■ Adjusting video with conversion of video signal to HDMI Analog to Analog Conversion Enables or disables video conversion between analog video jacks. Processing Adjust video with conversion of video input to HDMI video. Off On (Default) Disables video conversion between analog video jacks. Off (Default) Video are not adjusted with processing.
SETUP Setting various functions (Setup menu) Setting HDMI functions ■ Receiver operation via TV (HDMI Control) ■ Listening to TV audio via single HDMI cable (Audio Return Channel) HDMI Control Set the HDMI Control function to “On” to operate devices connected via HDMI. If the TV or other external components support HDMI Control (e.g.
SETUP Setting various functions (Setup menu) ■ Selecting an input source to assign audio input for the TV ■ Specify whether or not audio signal is output through this unit and a TV connected via the HDMI OUT jack TV Audio Input Select the input source that receives audio signals from TV while the HDMI Control function is on. When the TV is set to output sounds via this unit, the TV audio input is automatically selected to the input source assigned here.
SETUP Setting various functions (Setup menu) Adjusting this unit’s network parameters ■ Setting the network parameters (IP address, etc.) IP Address DHCP IP Address Selects whether this unit acquires the network parameters (IP address, etc.) from the network’s DHCP server automatically, or whether these parameters are specified manually. Network Standby Selects whether or not commands are accepted over the network when this unit is in standby mode.
SETUP Setting various functions (Setup menu) Setting this unit’s multi-zone function ■ Adjusting Zone2 volume ■ Displaying the video on the TV monitor in Zone2 Zone2 Set Volume Selects whether or not volume level adjustment of Zone2 speakers is enabled. Multi Zone setup items Zone2 Set Sets the Zone2 functions. Monitor Out Assign Displays the menus of Zone2 on the TV monitor. Party Mode Set Enable or disable the party mode function. Zone Scene Rename Changes the scene names of Zone2.
SETUP MAIN Setting various functions (Setup menu) ZONE 2 CODE SET ■ Changing Zone2 scene name SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI Zone Scene Rename Editing the name of the selected scene in Zone2. AUDIO 4 DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET Use kCursor B / C repeatedly to select “Zone Scene Rename” and press kENTER. 2 3 Press kENTER.
SETUP MAIN Setting various functions (Setup menu) ZONE 2 CODE SET ■ Entering standby mode SOURCE RECEIVER automatically when no operations are performed AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 USB NET MULTI DOCK Auto Power Down If you do not operate this unit or use the remote control for an extended period of time, it will automatically go into standby mode (Auto Power Down function). This function’s default setting is “Off.
SETUP Setting various functions (Setup menu) ■ Specifying menu display Display Set ■ Setting TRIGGER OUT functions Trigger Output1 Specify front panel display brightness and TV screen wall paper. Trigger Output2 Front Panel Display Specify front panel display brightness and message scroll pattern. Dimmer Scroll Adjustable range: -4 - 0 Reduce brightness of the front panel display. As the value is lowered, the panel display darkens.
SETUP Setting various functions (Setup menu) Target Source Specify the output level of electronic signal transmitted each time input is switched. Low J1 Terminates electronic signal transmission when the input source specified with this option is selected. High (Default) J2 Electronic signal is transmitted when the input source specified with this option is selected. This setting is available only when “Trigger Mode” is set to “Source.
SETUP MAIN ZONE 2 Confirming information of this unit (Information menu) CODE SET SOURCE RECEIVER A variety of information for this unit can be displayed. AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 USB NET MULTI DOCK Selecting information AUDIO HDMI OUT TUNER FM AM PRESET INFO 1 PHONO Press jON SCREEN. ■ Audio Signal information ■ Video Signal information Displays information on the current audio signal. Displays information on the current video signal. Format Signal format.
SETUP Confirming information of this unit (Information menu) ■ Network information Displays information on the network status. Refer to “Adjusting this unit’s network parameters” (☞p. 99) for details on setting the network status. IP Address / Subnet Mask / Default Gateway Displays the status of the current IP address assigned to this unit. DNS Server (P) / DNS Server (S) Displays the IP address of the primary and secondary DNS (Domain Name System) servers.
SETUP MAIN ZONE 2 CODE SET SOURCE RECEIVER c p You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code). The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.
SETUP MAIN Controlling the remote control to operate various functions ZONE 2 CODE SET SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 o p Registering remote control codes d for external component operations USB NET MULTI 4 DOCK HDMI OUT TUNER FM PHONO Press oCODE SET using a pointed object such as the tip of a ballpoint pen. ZONE 2 6 0 4 Once the remote control code is registered successfully pSOURCE/RECEIVER will blink twice.
SETUP MAIN Controlling the remote control to operate various functions ZONE 2 CODE SET SOURCE RECEIVER o p Resetting all remote control codes AV 1 2 3 4 5 6 7 V-AUX 1 2 Resetting all remote control codes for external components to the initial factory settings. AUDIO USB NET 3 MULTI Perform each of the following steps within 1 minute. Settings will be automatically stopped if more than 1 minute passes since the last operation. To reset, repeat from step 2.
SETUP Extended functionality that can be configured as needed (Advanced Setup menu) The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows. Displaying/Setting the Advanced Setup menu 3 Press PROGRAM l / h repeatedly to select the item to be set from the following items. Setting the impedance of speakers In the Advanced Setup menu, you can set the following settings. 1 2 Switch this unit to the standby mode.
SETUP MAIN Extended functionality that can be configured as needed (Advanced Setup menu) ZONE 2 CODE SET SOURCE RECEIVER o p Remote sensor AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI AUDIO 4 DOCK PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET STRAIGHT PURE DIRECT SCENE 1 2 3 4 BD/DVD TV CD RADIO ON (Default) Activate the signal-receiving capability of the remote control sensor OFF Deactivate the signal-receiving capability of the remote contr
SETUP Extended functionality that can be configured as needed (Advanced Setup menu) Changing TV format Removing HDMI video output up-scaling limits RECOV./BACKUP BACKUP Save and restore the settings of this unit. 1 Press STRAIGHT repeatedly to select “BACKUP” or “RECOVERY” and press INFO on the front panel. SKIP This unit ignores the TV’s support capability and transmits input video signals to the TV. DSP PARAM Initializes all parameters for the sound programs.
SETUP Extended functionality that can be configured as needed (Advanced Setup menu) Firmware update Firmware version FIRM UPDATE USB Update the firmware of this unit. For details on updating the firmware, refer to information supplied with updates. When this unit detects the latest firmware over a network, the message indicating that the firmware is released is displayed in the System information (☞p. 106). 1 Press STRAIGHT repeatedly to select “USB” or “NETWORK.
SETUP Using the HDMI Control function This unit supports the HDMI Control function, which allows you to operate external components via HDMI. If devices that support HDMI Control (e.g., Panasonic VIERA Link-compatible TVs, DVD/Blu-ray Disc players, etc.
SETUP MAIN Using the HDMI Control function ZONE 2 CODE SET SOURCE RECEIVER 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI AUDIO 4 DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET ■ Switching the input source on this To use other jacks to input audio signals from TV, carry out the following procedure. When the HDMI Control (☞p. 114) is operating properly, the input source of this unit is automatically changed to match operations carried out on the TV.
SETUP MAIN Using the HDMI Control function ZONE 2 CODE SET SOURCE RECEIVER 6 AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI Make sure that “HDMI Control” is “On” When “HDMI Control” is set to “Off,” press kENTER and kCursor B / C to set to “On.” AUDIO 4 7 8 DOCK HDMI OUT TUNER PHONO FM AM INFO MEMORY MOVIE MUSIC SLEEP PARTY PRESET TUNING ENHANCER SUR.
SETUP MAIN Using the HDMI Control function ZONE 2 CODE SET SOURCE RECEIVER AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI 5 Make sure that “HDMI Control” is “On.” 6 7 Press kCursor B / C to select “Control Select” and press kENTER. 8 9 Press kCursor B / C to select “TV Audio Input” and press kENTER. When “HDMI Control” is set to “Off,” press kENTER and kCursor B / C to set to “On.
SETUP Enjoying the contents in another room This unit allows you to configure a multi-zone audio system. The Zone2 feature allows you to set this unit to reproduce separate input sources in the main zone and the second zone (Zone2). You can control this unit from the second zone using the supplied remote control. From the ZONE2 OUT jacks ■ When using the external amplifier An amplifier located in the second zone can be connected to this unit as shown below.
SETUP Enjoying the contents in another room ■ Connecting zone video monitors ■ Controlling this unit with the remote control in another room Connect the video monitor(s) in Zone2 to MONITOR OUT/ZONE OUT jacks. If you connect the multiple zone video monitors to these jacks, the video monitors play back the selected input source for the Zone2. This unit is equipped with REMOTE IN and REMOTE OUT jacks. You can use these jacks to control this unit and other components from Zone2 (☞p. 34).
SETUP MAIN Enjoying the contents in another room ZONE 2 CODE SET SOURCE RECEIVER b q Controlling Zone2 AV 1 2 3 4 5 6 7 V-AUX 1 2 3 USB NET MULTI AUDIO 4 The remote control can be used to select and control Zone2 devices. The available operations are as follows: d • Selecting the input source of Zone2. • Tuning into FM or AM when “TUNER” is selected as the input source of Zone2. • Adjust the volume of Zone2 devices (when connected via the built-in amplifier).
APPENDIX Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. General Problem Cause Remedy See page The power will not turn on. The protection circuitry operated 3 times consecutively.
APPENDIX Troubleshooting Problem No picture. No sound is output from a specific speaker. Cause Remedy See page The video signal output from this unit is not supported by a monitor connected to this unit via the HDMI OUT 1-2 jacks. Displays the Advanced Setup menu and select “VIDEO” in “INITIALIZE” to reset the video parameters. 112 Displays the Advanced Setup menu and set “MONITOR CHECK” to “YES.” 112 An appropriate video input is not selected on the TV.
APPENDIX Troubleshooting Problem Cause Remedy See page There is noise interference from digital or radio frequency equipment. This unit is too close to other digital or radio frequency equipment. Noise/hum noise is heard. Incorrect cable connection. Connect the audio cables properly. If the problem persists, the cables may be defective. — A DTS-CD is being played back. 1) When only noise is output If a DTS bitstream signal is not properly input to this unit, only noise is output.
APPENDIX Troubleshooting Tuner (FM/AM) AM FM Problem FM stereo reception is noisy. Cause You are too far from the station transmitter, or the input from the antenna is weak. Remedy See page Check the antenna connections. 37 Switch to monaural mode. 62 Replace the outdoor antenna with a more sensitive multi-element antenna. — Adjust the antenna height or orientation, or place it in a different location. — There is distortion, and clear reception cannot be obtained even with a good FM antenna.
APPENDIX Troubleshooting USB and Network Problem Remedy See page Problem Cause “No Device” is displayed even when a USB device is present. This unit recognized the USB storage device as an illegal device. Turn this unit off then on again. — The music files and directories in the USB device cannot be viewed. The music files and directories are placed in locations other than the FAT area. Place music files and directories in the FAT area.
APPENDIX Troubleshooting Display Access error Cause Remedy See page This unit cannot access your USB storage device or USB portable audio player. Try another USB storage device or USB portable audio player. — There is a problem with the signal path from your USB storage device or USB portable audio player to this unit. Turn off this unit and reconnect your USB storage device or USB portable audio player to the USB port of this unit.
APPENDIX Troubleshooting Bluetooth™ Display Searching... Remote control Cause Remedy See page The Yamaha Bluetooth Wireless Audio Receiver and the Bluetooth component are in the process of pairing. — The Yamaha Bluetooth Wireless Audio Receiver and the Bluetooth component are in the process of establishing a connection. — Completed The pairing is completed. Canceled BT connected Disconnected Not found Problem The remote control does not work or function properly.
APPENDIX Glossary Audio information Audio and video synchronization (Lipsync) Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem and a capability of maintaining audio and video signals synchronized during post-production and transmission. Whereas the audio and video latency requires complex end-user adjustments, HDMI version 1.
APPENDIX Glossary DTS-HD Master Audio MPEG-4 AAC DTS-HD Master Audio is an advanced lossless audio technology developed for high-definition disc-based media including Blu-ray Disc. Selected as an optional audio standard for Blu-ray Disc, this technology delivers sound that is bit-for-bit identical to the studio master, offering a high-definition home theater experience. Supporting bitrates up to 24.5 Mbps for Blu-ray Disc, DTS-HD Master Audio can carry up to 7.
APPENDIX Glossary Video information Deep Color Component video signal With the component video signal system, the video signal is separated into the Y signal for luminance and the PB and PR signals for chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent. The component signal is also called the “color difference signal” because the luminance signal is subtracted from the color signal.
APPENDIX Information on HDMI™ ■ HDMI signal compatibility Audio signals Audio signal types Audio signal formats Compatible media 2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD, etc. DSD 2/5.1ch, 2.8224 MHz, 1 bit SACD, etc. Bitstream Dolby Digital, DTS DVD-Video, etc.
APPENDIX About trademarks Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. This receiver supports network connections. Bluetooth™ Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S.
APPENDIX Specifications ■ Input AV OUT Composite..................................................................................... 1 S-video.......................................................................................... 1 DLNA Version ............................................... 1.5 (DMP & DMR support) Audio Format ............. MP3, WMA, WAV, MPEG-4 AAC, FLAC Max Audio Support fs...............................................96 kHz/24 bit Cover Art Format ................................
APPENDIX Specifications • Dynamic Headroom 8 Ω .......................................................................................... 1.1 dB • Damping Factor FRONT L/R, 1 kHz, 8 Ω ............................................... 150 or more • Input Sensitivity/Input Impedance PHONO ......................................................................3.5 mV/47 kΩ AUDIO2 etc...............................................................200 mV/47 kΩ MULTI CH IN .............................................
APPENDIX Index Numerics 2ch stereo playback...................................................................... 50 5 channel speaker layout .............................................................. 18 5.1-channel speaker layout........................................................... 17 7.1-channel speaker connection ................................................... 19 7.1-channel speaker layout........................................................... 16 A Adaptive DRC, Option menu............
APPENDIX Index Input menu ................................................................................... 78 Input menu list ............................................................................. 79 Internet Radio............................................................................... 67 IP Address, Network setup .......................................................... 99 iPhone™ playback .......................................................................
APPENDIX Index Supplied accessories ...................................................................... 2 Surround Back Initial Delay, Sound Program menu ................... 85 Surround Back L Level, Sound Program menu ........................... 87 Surround Back Liveness, Sound Program menu ......................... 86 Surround Back R Level, Sound Program menu........................... 87 Surround Back Room Size, Sound Program menu ...................... 85 Surround back speaker .......................
© 2010 Yamaha Corporation YC711C0/OMEN2
© 2010 Yamaha Corporation Printed in Malaysia WW68000 The latest firmware notification / La dernière notification du pare-feu / Meldung der neuesten Firmware-Version / Meddelande om senaste firmware / L’avviso per il firmware più recente When the following notifications are displayed in the ON SCREEN menu while this unit is connected to the network, the firmware of this unit can be updated by using the Advanced Setup menu.
Aviso sobre la última versión del firmware / De nieuwste firmware-kennisgeving / Уведомление о последнем встроенном программном обеспечении / 最新固件通知 / 최신 펌웨어 알림 Cuando los avisos siguientes aparecen en el menú ON SCREEN estando esta unidad conectada a la red, el firmware de esta unidad se puede actualizar utilizando el menú Advanced Setup. Consulte “Actualización del firmware” en el Manual de Instrucciones para conocer más detalles sobre cómo actualizar el firmware.
List of remote control codes Lista de códigos de mando a distancia Liste des codes de commande Lijst met afstandsbedieningscodes Liste der Fernbedienungscodes Lista över fjärrstyrningskoder Elenco dei codici di telecomando TV A.R.
Genexxa 0320, 0340, 0347, 0350 GFM 0128, 0227 Giant 0282 Gibralter 0008, 0030, 0050, 0062 GoldHand 0277 Goldline 0320 GoldStar 0007, 0008, 0012, 0026, 0031, 0050, 0053, 0161, 0277, 0282, 0320, 0323, 0342, 0343, 0346, 0349, 0350 Goodmans 0246, 0272, 0282, 0320, 0323, 0337, 0343, 0344, 0349, 0350, 0462, 0473, 0477 Gorenje 0161, 0351 GPM 0340 GPX 0129 Gradiente 0240 Graetz 0347 Granada 0171, 0282, 0320, 0321, 0342, 0344, 0346, 0349, 0350 Grandin 0340, 0343, 0348, 0349 Gronic 0282 Grundig 0160, 0161, 0171, 031
0239, 0256, 0257, 0259, 0261, 0263, 0267, 0280, 0281, 0287, 0296, 0299, 0301, 0303, 0305, 0313, 0319, 0320, 0324, 0333, 0339, 0342, 0349, 0350, 0353, 0357, 0360, 0380, 0383, 0452, 0459, 0460 Philips Magnavox 0011, 0032, 0033 Phoenix 0161, 0277, 0320, 0339, 0349, 0350 Phonola 0277, 0320, 0339, 0349, 0350 Pilot 0007, 0008, 0050 Pioneer 0008, 0026, 0094, 0095, 0161, 0320, 0345, 0347, 0349, 0350, 0458 Plantron 0320, 0323, 0337, 0350 Playsonic 0282 Polaroid 0039, 0142, 0202, 0234 Poppy 0323, 0343 Portland 0007,
Yamaha Yamishi Yokan Yoko Yorx Zanussi Zenith 0008, 0026, 0050, 0053, 0080, 0081, 0082, 0083, 0086, 0087 0282, 0320 0320 0161, 0277, 0282, 0320, 0323, 0337, 0340, 0342, 0343, 0349, 0350 0340 0282, 0346 0008, 0028, 0029, 0030, 0031, 0054, 0061, 0062 VCR ABS Adventura Adyson Aiwa 1016 1069 1008 1024, 1026, 1027, 1069 Akai 1021, 1027 Akiba 1008, 1029 Akura 1008, 1027, 1029 Alba 1008, 1009, 1024, 1025, 1029, 1030 Alienware 1016 Ambassador 1030 American High 1068 Amstrad 1008, 1009, 1026 Anitech 1008, 1029
Sinudyne Solavox Sonic Blue Sonneclair Sonoko Sontec Sony 1028 1030 1022, 1123 1008 1009, 1025 1031 1001, 1016, 1048, 1053, 1073, 1074, 1080, 1081, 1082, 1083, 1108, 1118, 1216 Stack 1016 Stack 9 1016 Standard 1009, 1025 Stern 1009 STS 1068 Sunkai 1024 Sunstar 1026 Suntronic 1026 Sunwood 1008, 1029 Superscan 1020 Sylvania 1020, 1068, 1069, 1102, 1126 Symphonic 1008, 1069, 1126 Systemax 1016 Tagar Systems 1016 Taisho 1024 Tandberg 1009 Tandy 1065 Tashiko 1026, 1071 Tatung 1026, 1027, 1028 TCM 1015, 1024, 10
2309, 2310, 2311, 2344, 2345, 2347, 2379 Pointer 2362 Polaroid 2125, 2215, 2235 Portland 2362 Powerpoint 2363 Prima 2252 Proceed 2130 Proscan 2156 Prosonic 2360, 2377 Protron 2202 Provision 2358 Pye 2144 Qwestar 2148 Raite 2380 RCA 2021, 2029, 2104, 2105, 2131, 2149, 2156, 2157, 2229 RedStar 2356, 2360, 2362 Regent 2153 Reoc 2355 Rimax 2361 Rio 2133 Roadstar 2331, 2358 Ronin 2363 Rotel 2203 Rowa 2154, 2383 Rownsonic 2353 Saba 2148, 2188 Sabaki 2355 Saivod 2362 Sampo 2141 Samsung 2000, 2045, 2077, 2112, 2113
Tocom Torx Toshiba Tristar Tudi Tusa TV86 Unika United Cable Universal Universum V2 Videoway View Star Viewmaster Vision Visiopass Vortex View Wittenberg Zenith Zentek 3067 3017 3122 3127 3102 3072, 3123 3077 3065, 3070 3018, 3119 3065, 3070 3097, 3099 3127 3019 3074, 3077, 3079 3127 3127 3097, 3100, 3101 3127 3098 3113, 3122, 3124 3126 Satellite AB Sat AccessHD ADB AGS Akai Alba 4216, 4217 4104 4220 4216 4053, 4055 4001, 4004, 4006, 4007, 4062, 4217 Aldes 4005, 4007, 4010 Allsat 4048, 4053, 4055 Allsoni
Quadral Quelle Quiero RadioShack Radiola Radix Rainbow RCA Realistic Redpoint Redstar RFT Roadstar Roch Rover Saba Sabre Sagem Sakura Samsung SAT Sat Cruiser Sat Partner Sat Team Satcom Satec Satelco Satford Satmaster Satplus Schneider Schwaiger SCS Seemann SEG Seleco Servi Sat Siemens Silva Skantin Skardin 4024, 4007, 4005, 4008, 4216 4015, 4215, 4219 4052 4019 4055, 4053 4014, 4037 4004 4093, 4066, 4112, 4113, 4118, 4119, 4116, 4122, 4197, 4207 4078 4009 4024, 4008 4005, 4055, 4053 4217 4031 4024, 4217
