manual

En 108
3
Press ENTER, use the cursor keys to rename, and then press ENTER again.
4
Use the cursor keys to select “OK” and press ENTER.
• To clear the entry, select “CLEAR”.
5
To exit from the menu, press ON SCREEN.
■ Zone Rename
Changes the zone names displayed on the front display or TV screen.
■ Setup procedure
1
Use the cursor keys to select a zone to be renamed and press ENTER.
2
Press ENTER, use the cursor keys to rename, and then press ENTER again.
3
Use the cursor keys to select “OK” and press ENTER.
• To clear the entry, select “CLEAR”.
4
To exit from the menu, press ON SCREEN.
Function
Configures the functions that make this unit easier to use.
■ Auto Power Down
Sets the amount of time for auto-standby. If you do not operate this unit for the specified
time, this unit will automatically go into standby mode.
Settings
Default
U.K. and Europe models: 8 Hours
Other models: Off
Off Does not set this unit to standby mode automatically.
4 Hours, 8 Hours,
12 Hours
Sets this unit to standby mode when you have not operated this unit for the
specified time.