Operation Manual

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 109
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Automatically optimizes the speaker settings (YPAO). 38
Manual Setup
Setting Pattern Registers two speaker setting patterns and switches between them. 111
Setting Data Copy Copies the “Setting Pattern” parameters in the specified direction. 111
Power Amp Assign Selects a speaker system. 111
Configuration
Front Selects the size of the front speakers. 112
Center Selects whether or not a center speaker is connected and its size. 112
Surround Selects whether or not surround speakers are connected and their size. 112
Surround Back Selects whether or not surround back speakers are connected and their size. 112
Front Presence Selects whether or not front presence speakers are connected. 112
Subwoofer Selects whether or not a subwoofer is connected and its phase. 113
Layout Selects a surround speaker layout when surround speakers are used. 113
Bass Cross Over Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. 113
Distance Sets the distance between each speaker and listening position. 113
Level Adjusts the volume of each speaker. 113
Parametric EQ Adjusts the tone with an equalizer. 113
Test Tone Enables/disables the test tone output. 114
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 114
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 114
Adjustment Adjusts the delay between video and audio output manually. 115
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 115
Max Volume Sets the maximum volume to prevent excessive loudness. 115
Initial Volume Sets the initial volume for when this receiver is turned on. 115
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 115
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level. 115
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 115
Extended Surround Selects how to play back 5.1- to 7.1-channel sources when surround back speakers are used. 116
Video Video Mode Enables/disables the video signal processing (resolution and aspect ratio). 116