Operation Manual

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 110
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 117
Audio Output Selects a device to output audio. 118
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 118
Network
Network Connection Selects the network connection method. 119
IP Address Configures the network parameters (such as IP address). 119
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 119
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 119
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 120
Multi Zone
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the front display or TV screen. 121
Zone2 Set
Vol ume Enables/disables volume adjustments for Zone2 output. 121
Max Volume Sets the Zone2 maximum volume to prevent excessive loudness in the second zone. 121
Initial Volume Sets the Zone2 initial volume for when the unit is turned on. 121
Mono Switches between stereo and monaural for Zone2 output. 122
Zone Scene Rename Changes the scene names (for Zone2) displayed on the front display. 122
Zone Rename Changes the zone name (for Zone2) displayed on the front display or TV screen. 122
Monitor Out Assign Select the zone for which the MONITOR OUT/ZONE OUT jacks are used. 122
HDMI OUT2 Assign Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used. 122
Party Mode Set Enables/disables switching to the party mode. 122
Function
Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source. 123
Display Set
Dimmer (Front Display) Adjusts the brightness of the front display. 123
Short Message Selects whether to display short messages on the TV screen when the unit is operated. 123
Wallpaper Selects the image to be used as wallpaper on the TV. 123
Trigger Output1
Trigger Output2
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 124
Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. 124
DC OUT Power Mode Selects how to supply power through the DC OUT jack. 124
Memory Guard Prevents accidental changes to the settings. 125
ECO
Auto Power Standby Sets the amount of time for the auto-standby function. 125
ECO Mode Enables/disables the eco mode (power saving mode). 126
Language Select an on-screen menu language. 126
Menu Item Function Page