Owner’s Manual

ManualsBrandsYamaha ManualsRemote ControlsRX-A1050

English

AV Receiver

Owner’s Manual

Read the supplied booklet “Safety Brochure” before using the unit.

Summary of content (162 pages)

PAGE 1
AV Receiver Owner’s Manual Read the supplied booklet “Safety Brochure” before using the unit.
PAGE 2
CONTENTS 8 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 37 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 FEATURES 9 Configuring the necessary speaker settings . . . . . . . . . . . . . . . . . . . . . 38 6 10 Optimizing the speaker settings automatically (YPAO) . . . . . . . . . 39 Measuring at one listening position (single measure) . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
Playing back music via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 CONFIGURATIONS Playing back Bluetooth device music on the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 101 Configuring input sources (Input menu) . . . . . . . . . . . . . . . . . . . . . . . . . 101 Playing back iPod music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Connecting an iPod . . . . . .
PAGE 4
APPENDIX 136 Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Power, system and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 5
Accessories Operating range of the remote control Check that the following accessories are supplied with the product. • Point the remote control at the remote control sensor on the unit and remain within the operating range shown below.  Remote control  Batteries (AAA, R03, UM-4) (x2) Within 6 m (20 ft) 30° 30° Insert the batteries the right way round.  AM antenna  FM antenna • The illustrations of the main unit and remote control used in this manual are of the U.S.A.
PAGE 6
FEATURES What you can do with the unit Wide variety of supported content • Bluetooth . p.69 • iPod/iPhone . p.70 • USB . p.73 • Media server (PC/NAS) . p.76 • Internet radio . p.80 • AirPlay . p.83 Supports 2- to 7-channel (plus front presence) speaker system and up to 2 subwoofer connections. Allows you to enjoy favorite acoustic spaces in various styles. • Automatically optimizing the speaker . p.39 settings to suit your room (YPAO) • Reproducing stereo or multichannel . p.
PAGE 7
Full of useful functions! Useful tips ❑ Connecting various devices (p.30) ❑ Creating 3-dimensional sound fields (p.60) A number of HDMI jacks and various input/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio devices (such as CD players), game consoles, camcorders, and other devices. Connecting front presence speakers allows you to create a natural 3-dimensional sound field in your own room (CINEMA DSP 3D).
PAGE 8
Useful applications ■ AV CONTROLLER ■ AV SETUP GUIDE (for tablet) “AV CONTROLLER” will turn your smartphone/tablet into a Wi-Fi enabled remote control for your Yamaha network products. This application provides you the flexibility to control the available inputs, volume, mute, power commands and playback source. “AV SETUP GUIDE” is an application that assists you with cable connections between AV receiver and source devices as well as AV receiver setup.
PAGE 9
Part names and functions Front panel 1 2 3 4 5 MAIN ZONE PURE DIRECT INPUT 6 1 MAIN ZONE z key Turns on/off (standby) the unit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Control is enabled (p.120) • Standby Through is enabled (p.121) • Network Standby is enabled (p.122) • Bluetooth Standby is enabled (p.123) • An iPod is being charged (p.70) VOLUME 7 8 5 PURE DIRECT key Enables/disables Pure Direct (p.64).
PAGE 10
■ Inside of the front panel door 9 0 AB C ON SCREEN OPTION DE F GH SCENE TONE/BALANCE STRAIGHT 1 2 3 IJ K INFO(WPS) MEMORY PRESET FM AM TUNING L 4 (CONNECT) MULTI ZONE PROGRAM ENTER ZONE 2 RETURN ZONE CONTROL DISPLAY VIDEO AUX PHONES 5V M 9 ON SCREEN key Displays the on-screen menu on the TV. 0 Menu operations keys Cursor keys Select a menu or a parameter. ENTER Confirms a selected item. RETURN Returns to the previous screen. A OPTION key Displays the option menu (p.97).
PAGE 11
Front display (indicators) 1 23 4 6 5 7 8 9 ECO MUTE VOLUME ZONE ZONE ZONE SLEEP 3 4 IN OUT 1 2 3 2 ENHANCER PARTY STEREO TUNED 3 0A B Lights up when HDMI signals are being input or output. IN Lights up when HDMI signals are being input. OUT1/OUT2 Indicates the HDMI OUT jacks currently outputting an HDMI signal. 2 ECO Lights up when the unit is in the eco mode (p.128). 3 Signal strength indicator Indicates the strength of the wireless network signal (p.47).
PAGE 12
Rear panel 1 2 3 4 5 6 8 9 : HDMI (HDCP2.2) HDMI OUT (HDCP2.2) 2 (ZONE OUT) 7 1 AV 1 AV 2 AV 3 NETWORK AV 4 AV 5 AV 6 ABC ( 3 NET ) D (U.S.A. model) WIRELESS AV 7 (1 BD/DVD) ARC AC IN AV 1 AV 2 (1 BD/DVD) AV 3 AV 4 MONITOR OUT/ ZONE OUT PB Y COMPONENT VIDEO Y PR AV 2 PB TRIGGER OUT PR B 1 REMOTE 12V 0.1A MAX. TOTAL PHONO AUDIO 1 AUDIO 2 AUDIO 3 IN RS-232C OUT 2 (2 TV) A Y AV 1 ZONE OUT L PB PR Y PRE OUT (SINGLE) SURROUND SUR.
PAGE 13
HDMI (HDCP2.2) HDMI OUT (HDCP2.2) 2 (ZONE OUT) 1 AV 1 AV 2 AV 3 NETWORK AV 4 AV 5 AV 6 ( 3 NET ) (U.S.A. model) WIRELESS AV 7 (1 BD/DVD) ARC AC IN AV 1 AV 2 (1 BD/DVD) AV 3 AV 4 MONITOR OUT/ ZONE OUT PB Y COMPONENT VIDEO Y PR AV 2 PB TRIGGER OUT PR B 1 REMOTE 12V 0.1A MAX. TOTAL PHONO AUDIO 1 AUDIO 2 AUDIO 3 IN RS-232C OUT 2 (2 TV) A Y AV 1 ZONE OUT L PB PR Y PRE OUT (SINGLE) SURROUND SUR.
PAGE 14
Remote control 1 Remote control signal transmitter 1 Transmits infrared signals. 2 z (receiver power) key 2 Turns on/off (standby) the unit. AV 3 4 1 2 3 4 5 6 7 V-AUX AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 SCENE 5 1 2 3 4 BD/DVD TV NET RADIO 6 PROGRAM 7 TOP MENU 8 VOLUME MUTE POP-UP/MENU ON SCREEN OPTION 9 B C D E F G H I J ENTER DISPLAY BAND MODE TUNING PRESET SUR.
PAGE 15
PREPARATIONS General setup procedure 1 Connecting speakers (p.16) Basic speaker configuration (p.17) Select the speaker layout and connect the speakers to the unit. Advanced speaker configuration (p.22) Apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone configurations to enhance the system. 2 Connecting a TV (p.28) Connect a TV to the unit. 3 Connecting playback devices (p.
PAGE 16
1 2 3 4 5 6 7 8 9 10 11 1 Connecting speakers The unit has 7 built-in amplifiers. You can connect 2 to 9 speakers and up to 2 subwoofers to create the favorite acoustic space in your room. You can also apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone configurations to enhance your system (p.22). Caution • Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6  MIN”.
PAGE 17
1 2 3 4 5 6 7 8 9 10 11 Basic speaker configuration ■ Placing speakers in your room ❑ 7.1-channel system [★5.1.2] (using front presence speakers) Depending on the number of speakers, place the speakers and subwoofer in your room. This section describes the representative speaker layout examples. • To play back Dolby Atmos contents, apply a speaker system with a ★ mark. • (About the number of channels) For example, “5.1.2” denotes “standard 5.1-channel plus 2 for overhead speaker channels”.
PAGE 18
1 2 3 4 5 6 7 8 9 10 11 ❑ 5.1-channel system ❑ Front 5.1-channel system (using front presence speakers) E R 1 9 This speaker system creates Virtual Presence Speaker (VPS) using the front, center and surround speakers to produce a 3-dimensional sound field, and also creates Virtual Surround Back Speaker (VSBS) using the surround speakers to add a sense of depth to the rear sound field. This system is suited for enjoying not only 5.1-channel but also for 7.1-channel contents.
PAGE 19
1 2 3 4 5 6 7 8 9 10 11 ❑ Presence speaker layout Dolby Enabled SP The unit provides three layout patterns for presence speakers (Front Height, Overhead and Dolby Enabled SP). Choose a layout pattern that suits your listening environment. Use the Dolby Enabled speakers as the presence speakers. It utilizes sounds reflected from ceiling and lets you enjoy overhead sounds only from speakers that are placed at the same level as traditional speakers.
PAGE 20
1 2 3 4 5 6 7 8 9 10 11 ■ Connecting speakers Caution Connect the speakers placed in your room to the unit. • Be sure to use speakers that are made for ceiling use and take anti-drop measures. Ask a qualified contractor or dealer personnel for installation works. Caution ■ Setting the speaker impedance • Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before connecting the speakers. Under its default settings, the unit is configured for 8-ohm speakers.
PAGE 21
1 2 3 4 5 6 7 8 9 10 11 Cables necessary for connection (commercially available) ❑ Connecting speaker cables Speaker cables (x the number of speakers) Speaker cables have two wires. One is for connecting the negative (-) terminal of the unit and the speaker, and the other is for the positive (+) terminal. If the wires are colored to prevent confusion, connect the black wire to the negative and the other wire to the positive terminal.
PAGE 22
1 2 3 4 5 6 7 8 9 10 11 Advanced speaker configuration In addition to the basic speaker configuration (p.17), the unit also allows you to apply the following speaker configurations to enhance your system. Using the four internal amplifiers for front speakers to have more high-quality sounds Bi-amp connection Combining with an external power amplifier (Hi-Fi amplifier, etc.
PAGE 23
1 2 3 4 5 6 7 8 9 10 11 ■ Available speaker configurations ❑ 5ch BI-AMP Main zone Output channel (max) Bi-amp 5  7  7 Bi-amp External power amplifier (required) Multi-zone Surround back +1 (Zone2) Power Amp Assign (p.113) Page 5ch BI-AMP 23 5ch BI-AMP +SB 24 7ch +1ZONE 24 1 9 4 2 3 9 5 • When applying one of these configurations, you need to configure the “Power Amp Assign” setting in the “Setup” menu (p.38).
PAGE 24
1 2 3 4 5 6 7 8 9 10 11 ❑ 5ch BI-AMP +SB ❑ 7ch +1ZONE Bi-amp 1 9 1 2 3 9 9 4 1 5 6 7 2 9 3 4 5 6 2 7 Zone2 Main zone via external amp Speaker Connect to Speaker Connect to 12 FRONT and EXTRA SP (bi-amp connection) 12 FRONT 3 CENTER 3 CENTER 45 SURROUND 45 SURROUND 67 SUR.BACK (PRE OUT) via external power amplifier 67 SURROUND BACK ER (not used) ER (not used) 9 SUBWOOFER 1–2 9 SUBWOOFER 1–2 Zone2 speakers EXTRA SP • When Zone2 output is enabled (p.
PAGE 25
1 2 3 4 5 6 7 8 9 10 11 ■ Connecting front speakers that support bi-amp connections ■ Connecting Zone2 speakers When using front speakers that support bi-amp connections, connect them to the FRONT terminals and EXTRA SP terminals. When using Zone2 speakers, connect them to the EXTRA SP terminals. To utilize the EXTRA SP terminals for Zone2 speakers, configure the “Power Amp Assign” setting in the “Setup” menu after connecting the power cable to an AC wall outlet (p.38).
PAGE 26
1 2 3 4 5 6 7 8 9 10 11 ■ Connecting an external power amplifier (Example) Connecting front speakers via an external power amplifier When connecting an external power amplifier to enhance speaker output, connect the input jacks of the power amplifier to the PRE OUT jacks of the unit. The same channel signals are output from the PRE OUT jacks as from their corresponding SPEAKERS terminals. PRE OUT (FRONT) jacks HDMI (HDCP2.
PAGE 27
Input/output jacks and cables ■ Video/audio jacks ■ Video jacks ■ Audio jacks ❑ HDMI jacks ❑ COMPONENT VIDEO jacks ❑ OPTICAL jacks Transmit digital video and digital sound through a single jack. Use an HDMI cable. Transmit video signals separated into three components: luminance (Y), chrominance blue (PB), and chrominance red (PR). Use a component video cable with three plugs. Transmit digital audio signals. Use a digital optical cable. Remove the tip protector (if available) before using the cable.
PAGE 28
1 2 3 4 5 6 7 8 9 10 11 2 Connecting a TV Connect a TV to the unit so that video input to the unit can be output to the TV. About Audio Return Channel (ARC) You can also enjoy playback of TV audio on the unit. • ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a single HDMI cable, you can output video/audio to the TV or input TV audio to the unit. To maximize the performance of the unit, we recommend connecting a TV with an HDMI cable.
PAGE 29
1 2 3 4 5 6 7 8 9 10 11 ❑ COMPONENT VIDEO connection (with a component video cable) ❑ VIDEO (composite video) connection (with a video pin cable) The unit (rear) MONITOR OUT (VIDEO) jack (HDCP2.2) 2 (ZONE OUT) The unit (rear) HDMI (HDCP2.
PAGE 30
1 2 3 4 5 6 7 8 9 10 11 ■ Connecting another TV or a projector 3 Connecting playback devices The unit has two HDMI output jacks. If you connect another TV or a projector to the unit with an HDMI cable, you can switch the TV (or projector) to be used for watching videos with the remote control (p.56). The unit is equipped with a variety of input jacks including HDMI input jacks to allow you to connect different types of playback devices.
PAGE 31
1 2 3 4 5 6 7 8 9 10 11 ■ Component video connection ■ Composite video connection Connect a video device to the unit with a component video cable and an audio cable (digital coaxial, digital optical or stereo pin cable). Choose a set of input jacks (on the unit) depending on the audio output jacks available on your video device. Connect a video device to the unit with a video pin cable and an audio cable (digital coaxial, digital optical, or stereo pin cable).
PAGE 32
1 2 3 4 5 6 7 8 9 10 11 Connecting audio devices (such as CD players) PHONO jacks Audio output (PHONO) PHONO Connect audio devices such as CD players, MD players, and a turntable to the unit. Depending on the audio output jacks available on your audio device, choose one of the following connections. PHONO L L L L R R R R • The following explanation is based on the assumption that you have not changed the “Input Assignment” setting (p.126) in the “Setup” menu.
PAGE 33
1 2 3 4 5 6 7 8 9 10 11 Connecting to the jacks on the front panel ❑ Composite video/analog stereo connection Use the VIDEO AUX jack to temporarily connect a playback device to the unit. Connect a playback device (such as game consoles and camcorders) to the unit with a video pin cable and a stereo pin cable. Use the USB jack to connect an iPod or a USB storage device. For details, see “Connecting an iPod” (p.70) or “Connecting a USB storage device” (p.73).
PAGE 34
1 2 3 4 5 6 7 8 9 10 11 4 Connecting the FM/AM antennas Connect the supplied FM/AM antennas to the unit. Assembling the AM antenna Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface. FM antenna AM antenna HDMI (HDCP2.2) HDMI OUT (HDCP2.2) 2 (ZONE OUT) AV 1 AV 2 (1 BD/DVD) 1 AV 1 AV 2 AV 3 AV 4 AV 5 AV 6 AV 7 (1 BD/DVD) ARC AV 3 AV 4 MONITOR OUT/ ZONE OUT PB Y COMPONENT VIDEO Y PR AV 2 PB TRIGGER OUT PR B 1 RE 12V 0.1A MAX.
PAGE 35
1 2 3 4 5 6 7 8 9 10 11 5 Connecting a network cable or preparing the wireless antenna Connect the unit to a router (access point) with a network cable, or prepare the wireless antenna for establishing a wireless network connection. • Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the access of the unit to the network devices or the Internet. In these cases, configure the security software or firewall settings appropriately.
PAGE 36
1 2 3 4 5 6 7 8 9 10 11 6 Connecting other devices 7 Connecting the power cable Before connecting the power cable (General model only) Connecting a device compatible with the trigger function Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110–120/220–240 V, 50/60 Hz. The trigger function can control an external device in conjunction with operating the unit (such as powering on/off and input selection).
PAGE 37
1 2 3 4 5 6 7 8 9 10 11 z 8 Selecting an on-screen menu language AV 1 5 2 3 4 6 7 V-AUX Select the desired on-screen menu language from English (default), Japanese, French, German, Spanish, Russian, Italian and Chinese. AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 1 2 SCENE 1 2 3 4 BD/DVD TV NET RADIO TOP MENU Use the cursor keys (e/r) to select “Language” and the cursor keys (q/w) to select the desired language.
PAGE 38
1 2 3 4 5 6 7 8 9 10 11 z 9 Configuring the necessary speaker settings AV 1 5 2 3 4 6 7 V-AUX If you use any of the following speaker configurations, follow the procedure below to configure the corresponding speaker settings manually before performing YPAO. AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 6 When using any of advanced speaker configurations • Advanced speaker configuration (p.22) a Use the cursor keys to select “Power Amp Assign” (p.
PAGE 39
1 2 3 4 5 6 7 8 9 10 11 z 10 Optimizing the speaker settings automatically (YPAO) AV 1 5 2 3 4 6 7 V-AUX The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room.
PAGE 40
1 2 3 4 5 6 7 8 9 10 11 The following screen appears on the TV. • If you perform the multi measure, the speaker settings will be optimized for you to enjoy surround sound in a wider space. AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET • If you perform the multi measure, first place the YPAO microphone at the listening position you will be seated most frequently.
PAGE 41
1 2 3 4 5 6 7 8 9 10 11 Measuring at one listening position (single measure) AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT ZONE 2 1 SCENE 1 2 3 4 BD/DVD TV NET RADIO To start the measurement, use the cursor keys to select “Measure” and press ENTER. The measurement will start in 10 seconds. Press ENTER again to start the measurement immediately.
PAGE 42
1 2 3 4 5 6 7 8 9 10 11 5 AV 1 2 3 4 5 6 7 V-AUX Disconnect the YPAO microphone from the unit. This completes optimization of the speaker settings. AUDIO 1 2 3 PHONO Caution TUNER BLUETOOTH USB NET PARTY HDMI OUT • The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment).
PAGE 43
1 2 3 4 5 6 7 8 9 10 11 3 AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT AUDIO MAIN ZONE 2 When the measurements at the positions you want to measure are completed, use the cursor keys to select “CANCEL” and press ENTER. 6 Use the cursor keys (e/r) to select “YES” or “NO” to enable/disable YPAO Volume and press ENTER. When you have taken measurements at 8 listening positions, the following screen appears automatically.
PAGE 44
1 2 3 4 5 6 7 8 9 10 11 Checking the measurement results 3 AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT You can check the YPAO measurement results. 1 AUDIO MAIN ZONE 2 • You can also select “Result” from “Auto Setup” (p.110) in the “Setup” menu, which displays the previous measurement results. SCENE 1 2 3 4 BD/DVD TV NET RADIO TOP MENU The following screen appears.
PAGE 45
1 2 3 4 5 6 7 8 9 10 11 Error messages If any error message is displayed during the measurement, resolve the problem and perform YPAO again. Error message Cause E-1:No Front SP Front speakers are not detected. E-2:No Sur. SP One of the surround speakers cannot be detected. E-3:No F.PRNS SP One of the front presence speakers cannot be detected. E-4:SBR → SBL A surround back speaker is connected to the R side only.
PAGE 46
1 2 3 4 5 6 7 8 9 10 11 Warning messages If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions. However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings. Warning message Cause Remedy W-1:Out of Phase A speaker cable may be connected with the reverse polarity (+/-). Select “Wiring” in “Result” (p.
PAGE 47
1 2 3 4 5 6 7 8 9 10 11 11 Connecting to a network device wirelessly ■ Connecting without a wireless router (access point) Connect the unit to a wireless router (access point) or a mobile device by establishing a wireless connection. Connect a mobile device to the unit directly. You can use the application for smartphone / tablet “AV CONTROLLER” to control the unit from mobiles devices or enjoy music files stored on mobiles devices on the unit.
PAGE 48
1 2 3 4 5 6 7 8 9 10 11 z Connecting the unit to a wireless network AV 7 V-AUX There are several methods to connect the unit to a wireless network. 1 2 3 PHONO Select a connection method according to your environment. TUNER BLUETOOTH USB NET PARTY HDMI OUT 1 5 2 3 4 6 AUDIO MAIN ZONE 2 Do you own iOS devices (iPhone/iPod touch)? 6 Use the cursor keys (q/w) to select “Network Connection” and press ENTER.
PAGE 49
1 2 3 4 5 6 7 8 9 10 11 9 AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT Use the cursor keys (q/w) and ENTER to select the desired connection method and select “NEXT”. ❑ Sharing the iOS device setting wirelessly If you select “Wireless (WAC)” as the connection method, perform the network setting sharing operation on your iOS device. (The following procedure is a setup example for iOS 8.
PAGE 50
1 2 3 4 5 6 7 8 9 10 11 ❑ Sharing the iOS device setting using a USB cable z AV 1 2 3 4 5 6 7 V-AUX 1 AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 If you select “USB Cable” as the connection method, follow the procedure below to share the iOS device setting with the unit. Connect the iOS device to the USB jack, and disable the screen lock on the iOS device.
PAGE 51
1 2 3 4 5 6 7 8 9 10 11 z AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT AUDIO MAIN ZONE 2 ■ C: Using other connection methods If your wireless router (access point) does not support WPS push button configuration method, follow the procedure below to configure the wireless network settings.
PAGE 52
1 2 3 4 5 6 7 8 9 10 11 AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT ❑ Searching for an access point ❑ Setting up the wireless connection manually If you select “Access Point Scan” as the connection method, the unit starts searching for access points. After a while, the list of available access points appears on the TV screen. If you select “Manual Setting” as the connection method, the wireless connection setting screen appears on the TV.
PAGE 53
1 2 3 4 5 6 7 8 9 10 11 3 AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT If you select “None” in Step 2, this setting is not available. Proceed to Step 4. AUDIO MAIN ZONE 2 2 3 4 BD/DVD TV NET RADIO TOP MENU If you select “PIN Code” as the connection method, the list of available access points appears on the TV screen. 1 If you select other method, enter either 8 to 63 character string, or 64 hexadecimal digits.
PAGE 54
1 2 3 4 5 6 7 8 9 10 11 z AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT ZONE 2 1 2 3 4 TV NET RADIO TOP MENU 1 2 VOLUME MUTE PROGRAM POP-UP/MENU ON SCREEN Use the cursor keys (q/w) and ENTER to check “Wireless Direct” and select “OK”. • Wireless Direct connection may be insecure since the communication is not strongly encrypted. The unit may operate by playback operation on wireless devices connected to the unit without permission.
PAGE 55
1 2 3 4 5 6 7 8 9 10 11 9 AV 1 2 3 4 5 6 7 V-AUX If you select “None” in Step 8, this setting is not available. Proceed to Step 10. AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 Use the cursor keys and ENTER to enter the security key and select “NEXT”. Otherwise, either 8 to 63 character string, or 64 hexadecimal digits.
PAGE 56
PLAYBACK AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT AUDIO MAIN ZONE 2 Input selection keys Basic playback procedure 1 Turn on the external devices (such as a TV or BD/DVD player) connected to the unit. 2 Use the input selection keys to select an input source. 3 Start playback on the external device or select a radio station.
PAGE 57
Selecting the input source and favorite settings with one touch (SCENE) AV 1 5 2 3 4 6 7 V-AUX The SCENE function allows you to select the assigned input source, sound program, HDMI output and various settings with just one touch. You can use up to 12 scenes to register your favorite settings and switch them depending on a playback source. AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 1 SCENE 1 2 3 4 BD/DVD TV NET RADIO SCENE Press SCENE.
PAGE 58
Configuring scene assignments Selecting setting items to be included as scene assignments AV 1 2 3 4 5 6 7 V-AUX AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 SCENE 1 2 3 4 BD/DVD TV NET RADIO VOLUME MUTE PROGRAM TOP MENU 1 Set the unit to the condition (such as input source and sound program) that you want to assign to a scene. 2 Hold down the desired SCENE key until “SET Complete” appears on the front display.
PAGE 59
Selecting the sound mode AV 1 5 2 3 4 6 7 V-AUX The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 ❑ Selecting a sound program suitable for movies 2 3 4 BD/DVD TV NET RADIO VOLUME MUTE TOP MENU a Press ON SCREEN.
PAGE 60
■ Sound programs suitable for movies (MOVIE) Enjoying stereoscopic sound fields (CINEMA DSP 3D) The following sound programs are optimized for viewing video sources, such as movies, TV programs, and games. ❑ MOVIE THEATER The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP technology (CINEMA DSP 3D). It allows you to easily create sound fields like actual movie theaters or concert halls in your room and enjoy natural stereoscopic sound fields.
PAGE 61
■ Sound programs suitable for music/stereo playback (MUSIC) ❑ ENTERTAINMENT Sports This program allows listeners to enjoy the rich vividness of sport broadcasts and light entertainment programs. In sports broadcasts, the commentators’ voices are positioned clearly at the center, while the atmosphere inside the stadium is realistically conveyed by the peripheral delivery of the sounds of the fans in a suitable space.
PAGE 62
■ Enjoying sound field effects without surround speakers (Virtual CINEMA DSP) ❑ LIVE/CLUB Village Vanguard The Jazz club is on 7th Avenue, New York. This small club with the low ceiling makes the powerful reflections converge toward the stage located in the center. Warehouse Loft The warehouse resembles some lofts in Soho. Sound reflects off the concrete walls clearly with a lot of energy. Cellar Club This program simulates an intimate concert venue with a low ceiling and homey atmosphere.
PAGE 63
Enjoying unprocessed playback AV 1 2 3 4 5 6 7 V-AUX You can play back input sources without any sound field effect processing. AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 ■ Playing back in original channels (straight decode) When the straight decode mode is enabled, the unit produces stereo sound from the front speakers for 2-channel sources such as CDs, and produces unprocessed multichannel sounds for multichannel sources.
PAGE 64
• You cannot select the Dolby Pro Logic IIx decoders when headphones are connected or when “Surround Back” (p.114) in the “Setup” menu is set to “None”. AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT • When the Dolby Surround decoder is selected, virtual surround processing (such as Virtual CINEMA FRONT) (p.62), YPAO Volume (p.98) or Compressed Music Enhancer (p.64) does not work.
PAGE 65
Listening to FM/AM radio AV 1 5 2 3 4 6 7 V-AUX You can tune into a radio station by specifying its frequency or selecting from registered radio stations. AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET MAIN PARTY ZONE 2 TUNER • The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in U.K. and Europe models.
PAGE 66
Registering favorite radio stations (presets) AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT You can register up to 40 radio stations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers. AUDIO MAIN ZONE 2 2 3 4 BD/DVD TV NET RADIO • You can automatically register FM radio stations that have strong signals by using “Auto Preset” (p.68).
PAGE 67
Radio Data System tuning • “Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not displayed if the radio station does not provide the Radio Data System service. AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT (U.K. and Europe models only) Radio Data System is a data transmission system used by FM stations in many countries.
PAGE 68
■ Browse screen Operating the radio on the TV AV 1 2 3 4 5 6 7 V-AUX You can view the radio information or select a radio station on the TV. 1 AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 TUNER 1 Press TUNER to select “TUNER” as the input source. 3 The playback screen is displayed on the TV.
PAGE 69
Playing back music via Bluetooth AV 1 5 2 3 4 6 7 V-AUX You can play back music files stored on a Bluetooth device (such as smartphones) on the unit. AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 BLUETOOTH Follow the procedure below to establish a Bluetooth connection between a Bluetooth device (such as smartphones) and the unit, and play back music stored the Bluetooth device on the unit.
PAGE 70
Playing back iPod music AV 1 5 2 3 4 6 7 V-AUX You can play back iPod music on the unit using a USB cable supplied with the iPod. AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 Follow the procedure below to operate the iPod contents and start playback. USB • For details on playable iPod devices, see “Supported devices and file formats” (p.150). 2 3 4 BD/DVD TV NET RADIO • The unit does not support a USB connection for iPad.
PAGE 71
■ Browse screen AV 1 2 3 4 5 6 7 V-AUX 1 2 3 AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 ■ Playback screen 1 2 4 SCENE 1 2 3 4 BD/DVD TV NET RADIO 1 Status indicators 1 Status indicators VOLUME MUTE PROGRAM TOP MENU Display the current shuffle/repeat settings (p.72) and playback status (such as play/pause). OPTION 3 Contents list ENTER RETURN DISPLAY Menu operation keys Cursor keys ENTER Displays the list of iPod content.
PAGE 72
■ Operating the iPod itself (simple play) AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT 1 MAIN ZONE 2 To display the TV menu screen, press MODE again. 2 SCENE 1 2 3 4 BD/DVD TV NET RADIO TOP MENU Operate your iPod itself to start playback. • During simple play, configure the shuffle/repeat settings directly on your iPod or press MODE to display the TV menu screen and then follow the procedure below.
PAGE 73
Playing back music stored on a USB storage device AV 1 5 2 3 4 6 7 V-AUX You can play back music files stored on a USB storage device on the unit. AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 SCENE 1 2 3 4 BD/DVD TV NET RADIO VOLUME MUTE PROGRAM TOP MENU POP-UP/MENU ON SCREEN OPTION USB The unit supports USB mass storage class devices (FAT16 or FAT32 format). • For details on playable file formats, see “Supported devices and file formats” (p.
PAGE 74
2 AV 1 2 3 4 5 6 7 V-AUX 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 ■ Browse screen 1 2 3 If a song is selected, playback starts and the playback screen is displayed. AUDIO 1 Use the cursor keys to select an item and press ENTER. 5 4 SCENE 1 2 3 4 BD/DVD TV NET RADIO 1 Status indicators VOLUME MUTE PROGRAM TOP MENU 2 List name POP-UP/MENU ON SCREEN OPTION ENTER RETURN DISPLAY BAND MODE TUNING PRESET SUR.
PAGE 75
■ Playback screen AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT ■ Shuffle/repeat settings You can configure the shuffle/repeat settings for playback of USB storage device contents. 1 2 AUDIO MAIN ZONE 2 3 1 When “USB” is selected as the input source, press OPTION. 2 Use the cursor keys to select “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER.
PAGE 76
Playing back music stored on media servers (PCs/NAS) ❑ For Windows Media Player 11 You can play back music files stored on your PC or DLNA-compatible NAS on the unit. • To use this function, the unit and your PC must be connected to the same router (p.35). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Network” (p.130) in the “Information” menu. • The audio may be interrupted while using the wireless network connection.
PAGE 77
Playback of PC music contents 3 AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT Follow the procedure below to operate the PC music contents and start playback. AUDIO MAIN ZONE 2 NET You can control the PC/NAS with the menu displayed on the TV screen. 1 SCENE 1 2 3 4 BD/DVD TV NET RADIO TOP MENU If a song is selected, playback starts and the playback screen is displayed. Press NET repeatedly to select “SERVER” as the input source.
PAGE 78
■ Browse screen AV 1 2 3 4 5 6 7 V-AUX 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 1 2 1 2 3 AUDIO 1 ■ Playback screen 4 SCENE 1 2 3 4 BD/DVD TV NET RADIO 1 Status indicators 1 Status indicators VOLUME MUTE PROGRAM TOP MENU 3 5 Display the current shuffle/repeat settings (p.79) and playback status (such as play/pause). 2 Playback information 2 List name POP-UP/MENU ON SCREEN Displays the artist name, album name, song title, and elapsed time.
PAGE 79
■ Shuffle/repeat settings You can configure the shuffle/repeat settings for the playback of PC music content. AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT AUDIO MAIN ZONE 2 1 When “SERVER” is selected as the input source, press OPTION. 2 Use the cursor keys to select “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER. SCENE 1 2 3 4 BD/DVD TV NET RADIO • To return to the previous screen during menu operations, press RETURN.
PAGE 80
Listening to Internet radio AV 1 5 2 3 4 6 7 V-AUX You can listen to Internet radio stations from all over the world. Playback of Internet radio AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 NET • To use this function, the unit must be connected to the Internet (p.35). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Network” (p.130) in the “Information” menu.
PAGE 81
■ Browse screen AV 1 2 3 4 5 6 7 V-AUX 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 4 2 3 4 BD/DVD TV NET RADIO 1 Playback indicator 1 Playback indicator 2 List name 2 Playback information VOLUME MUTE TOP MENU 3 5 SCENE 1 PROGRAM 1 2 1 2 3 AUDIO 1 ■ Playback screen ON SCREEN Displays the list of Internet radio content. Use the cursor keys (q/w) to select an item and press ENTER to confirm the selection.
PAGE 82
Registering favorite Internet radio stations (bookmarks) AV 1 2 3 4 5 6 7 V-AUX By registering your favorite Internet radio stations to “Bookmarks”, you can quickly access to them from the “Bookmarks” folder in the browse screen. AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 3 ■ Registering the station on the browse/playback screen Access the vTuner website (http://yradio.vtuner.com/) with the web browser on your PC and enter the vTuner ID.
PAGE 83
Playing back music with AirPlay Playback of iTunes/iPod music contents The AirPlay function allows you to play back iTunes/iPod music on the unit via network. iTunes Follow the procedure below to play back iTunes/iPod music contents on the unit. PC (wired or wireless) 1 Router The unit Turn on the unit, and start iTunes on the PC or display the playback screen on the iPod.
PAGE 84
• You can turn on the unit automatically when starting playback on iTunes or iPod by setting “Network Standby” (p.122) in the “Setup” menu to “On”. AV 1 5 2 3 4 6 7 V-AUX 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT • You can edit the network name (the unit’s name on the network) displayed on iTunes/iPod in “Network Name” (p.123) in the “Setup” menu. AUDIO MAIN ZONE 2 • You can use the external device operation keys (a, s, d, f, g) on the remote control to control playback.
PAGE 85
Playing back music in multiple rooms (multi-zone) ■ Enjoying videos/music in another room The multi-zone function allows you to play back different input sources in the room where the unit is installed (main zone) and in another room (Zone2). You can enjoy videos/music using a TV placed in another room. For example, while you are watching TV in the living room (main zone), another person can listen to radio in the study room (Zone2).
PAGE 86
❑ Enjoying videos/music using only a TV Preparing Zone2 Connect the device that will be used in Zone2 to the unit. Caution • Remove the unit’s power cable from the AC wall outlet before connecting speakers or an external amplifier. Video/audio (HDMI) • Ensure that the core wires of the speaker cable do not touch one another or come into contact with the unit’s metal parts. Doing so may damage the unit or the speakers.
PAGE 87
❑ Using an external amplifier ■ Connecting a video monitor to play back analog videos Connect the external amplifier (with volume control) placed in Zone2 to the unit with a stereo pin cable and connect speakers to the external amplifier. Connect a video monitor to watch analog videos at Zone2. Depending on the video input jacks available on your video monitor, choose one of the video connection methods. The unit (rear) ZONE OUT (ZONE 2) jacks HDMI OUT (HDCP2.
PAGE 88
■ Connecting an HDMI-compatible device to play back videos/audio • When the HDMI OUT 2 (ZONE OUT) jack is assigned to Zone2, you can enable/disable the audio output from the HDMI OUT 2 jack by setting “Audio Output” (p.120) in the “Setup” menu to “On” or “Off” (default). Connect an HDMI-compatible device (such as a TV) to play back videos/audio at Zone2. • You can also use speakers placed in Zone2 to output audio (p.25).
PAGE 89
■ Operating the unit from Zone2 (remote connection) Remote connections between Yamaha products An infrared signal transmitter is not required if you are using Yamaha products that support remote connections, as the unit does. You can transmit remote control signals by connecting the REMOTE IN/OUT jacks with monaural mini-jack cables and an infrared signal receiver.
PAGE 90
z Controlling Zone2 4 AV 1 5 2 3 4 6 7 V-AUX AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 Input selection keys 1 2 MAIN/ZONE2 SCENE 1 2 3 4 BD/DVD TV NET RADIO VOLUME MUTE PROGRAM TOP MENU 3 Set MAIN/ZONE2 to “ZONE2”. Refer to the instruction manual for the external device. Press z (receiver power). For details on the following operations, see the corresponding pages. Each time you press the key, Zone2 is enabled or disabled.
PAGE 91
■ Other operations for Zone2 The following functions are also available when Zone2 is enabled. AV 1 2 3 4 5 6 7 V-AUX Adjusting the volume Press VOLUME or MUTE. AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT Selecting the input source and settings at once (SCENE) Press SCENE. MAIN ZONE 2 PARTY 2 3 4 BD/DVD TV NET RADIO VOLUME MUTE PROGRAM TOP MENU POP-UP/MENU ON SCREEN SCENE MUTE Each time you press the key, the party mode is turned on or off.
PAGE 92
Registering favorite items (shortcut) AV 1 5 2 3 4 6 7 V-AUX You can register up to 40 favorite USB and network contents as shortcuts and access them directly by selecting the shortcut numbers. AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 BLUETOOTH USB NET • You can also use the “Bookmarks” feature to register Internet radio stations (p.82). • Only the input source will be registered for Bluetooth and AirPlay. Individual contents cannot be registered.
PAGE 93
Controlling the unit from a web browser (web control) You can control the unit with the web control screen displayed in a web browser. Web browser • You can check the IP address of the unit in “Network” (p.130) in the “Information” menu. • You can bookmark the unit’s IP address in the browser or create a shortcut link (p.95) to access the web control screen quickly in the future. However, if you are using a DHCP server, the IP address of the unit may change each time the unit is turned on.
PAGE 94
■ Top menu screen ■ Control screen 3 1 5 1 6 2 3 4 4 5 7 2 1 CONTROL 6 1 PLAY INFO Moves to the control screen for the selected zone. Selects an input source or controls playback for the selected zone. 2 STATUS 2 TOP MENU Turns on/off the power for each zone or displays the input source and volume set for each zone. Moves to the top menu screen. 3 SETTINGS 3 SCENE Moves to the settings screen. Selects a scene for the selected zone.
PAGE 95
■ Settings screen 2 BACK Moves to the top menu screen. 3 RELOAD Reloads the current status of the unit. 1 Note • If the network settings are changed, you may need to restart the browser or regain access to the unit. • When using the MAC address filter, make sure you specify the MAC addresses of your network devices correctly. Otherwise, the unit will be inaccessible from your network devices such as PCs and other external devices.
PAGE 96
Viewing the current status AV 1 5 2 3 4 6 7 V-AUX 3 PHONO Switching information on the front display AUDIO 1 2 TUNER MAIN BLUETOOTH ZONE 2 USB NET PARTY HDMI OUT 1 Press INFO. Each time you press the key, the displayed item changes.
PAGE 97
Configuring playback settings for different playback sources (Option menu) Option menu items You can configure separate playback settings for different playback sources. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback. 1 Press OPTION. • Available items vary depending on the selected input source. • Text in parentheses denotes indicators on the front display.
PAGE 98
Item Function Traffic Program (TrafficProgram) (U.K. and Europe models only) Automatically searches for a traffic information station. 67 Shuffle (Shuffle) Configures the shuffle setting for the iPod (p.72), USB storage device (p.75), or media server (p.79). — Repeat (Repeat) Configures the repeat setting for the iPod (p.72), USB storage device (p.75), or media server (p.79). — ■ YPAO Volume (YPAO Volume) Page Enables/disables YPAO Volume or Adaptive DRC. YPAO Volume (YPAO Vol.
PAGE 99
■ Dialogue (Dialog) ■ Subwoofer/Bass (Subwoofer/Bass) Adjusts the volume or perceive height of dialogue sounds. Adjust the subwoofer volume or bass sound. Dialogue Level (Dialog Lvl) Subwoofer Trim (SW.Trim) Adjusts the volume of dialogue sounds. If dialogue sounds cannot be heard clearly, you can turn up its volume by increasing this setting. Fine-adjusts the subwoofer volume. Setting range -6.0 dB to 0.0 dB to +6.0 dB (0.
PAGE 100
Hi-Res Mode (HiRes Mode) Audio Select (A.Sel) Enables/disables the high-resolution mode when “Enhancer” is set to “On”. If this function is set to “On”, you can enhance the quality of uncompressed digital audio (such as 2-channel PCM and FLAC) using Compressed Music Enhancer. Selects the audio input jack to use when more than one audio connection is made for one input source. Settings Settings On (On) Enables the high-resolution mode.
PAGE 101
CONFIGURATIONS 4 Configuring input sources (Input menu) Use the cursor keys (q/w) to select an item and press ENTER. You can change the input source settings using the TV screen. 1 2 Press ON SCREEN. Use the cursor keys to select “Input” and press ENTER. • To return to the previous screen during menu operations, press RETURN. 3 5 6 Use the cursor keys (e/r) to select an input source to be configured and press the cursor key (q). Use the cursor keys to select a setting and press ENTER.
PAGE 102
■ Rename/Icon Select ■ Decoder Mode Changes the input source name and icon displayed on the front display or TV screen. Sets the format of digital audio playback to “DTS”. For example, if the unit does not detect DTS audio and outputs noise, set “Decoder Mode” to “DTS”.
PAGE 103
Configuring the SCENE function (Scene menu) 4 Use the cursor keys (q/w) to select an item and press ENTER. 5 6 Use the cursor keys and ENTER to change the setting. You can change the settings of the SCENE function (p.57) using the TV screen. 1 2 3 Press ON SCREEN. Use the cursor keys to select “Scene” and press ENTER. To exit from the menu, press ON SCREEN. Scene menu items Use the cursor keys (e/r) to select a scene to be configured and press the cursor key (q).
PAGE 104
■ Load Detail Loads the settings registered for the selected scene. Selects items to be included as the scene assignments. You can also view the settings currently assigned to the selected scene. Select “DETAIL” to configure the SCENE link playback setting or view the scene assignments. To include items as the scene assignments, use the cursor keys to select an item and press ENTER to check the box (or uncheck the box to exclude).
PAGE 105
■ Rename/Icon Select Configuring sound programs/surround decoders (DSP Program menu) Changes the scene name and icon displayed on the front display or TV screen. ■ Setup procedure 1 2 3 You can change the settings of the sound programs and surround decoders using the TV screen. Use the cursor keys (e/r) to select an icon and press the cursor key (w). 1 2 Press ON SCREEN. 3 Use the cursor keys (e/r) to select a sound program to be configured and press the cursor key (q).
PAGE 106
4 DSP Program menu items Use the cursor keys (q/w) to select an item and press ENTER. • Available items vary depending on the selected sound program or surround decoder. • Default settings are underlined. ■ Settings for sound programs • To return to the previous screen during menu operations, press RETURN.
PAGE 107
Item Function Liveness Adjusts the loss of the presence sound field. The following items are available when you select “2ch Stereo” or “7ch Stereo”. Settings Sound program 0 to 10 Higher to enhance the reflectivity, and lower to reduce it. Surround Liveness Adjusts the loss of the surround sound field. Surround Back Liveness Adjusts the loss of the surround back sound field. Reverb Time Adjust the decay time of the rear reverberant sound. 1.0 s to 5.
PAGE 108
■ Settings for decoders The following items are available when you set “Decode Type” of “SURROUND DECODER” to “bSurround”, “bPLIIx Music” (bPLII Music) or “Neo:6 Music”. Decode Type bSurround Item Function Settings Center Spread Selects whether to spread the center channel signals to left and right when 2-channel source is played. Off, On Select “On” to spread center channel signals to left and right if you feel the center sound is too strong when 2-channel source is played.
PAGE 109
4 Configuring various functions (Setup menu) Use the cursor keys (q/w) to select an item and press ENTER. You can configure the unit’s various function with the menu displayed on the TV screen. 1 2 Press ON SCREEN. Use the cursor keys to select “Setup” and press ENTER. • To return to the previous screen during menu operations, press RETURN. 3 5 6 Use the cursor keys (e/r) to select a menu. En 109 Use the cursor keys to select a setting and press ENTER. To exit from the menu, press ON SCREEN.
PAGE 110
Setup menu items Menu Item Function Auto Setup Automatically optimizes the speaker settings (YPAO). 39 Setting Pattern Registers two speaker setting patterns and switches between them. 113 Setting Data Copy Copies the “Setting Pattern” parameters in the specified direction. 113 Power Amp Assign Selects a speaker system. 113 Front Selects the size of the front speakers. 114 Center Selects whether or not a center speaker is connected and its size.
PAGE 111
Menu Item Video HDMI Network Bluetooth Page Delay Enable Enables/disables the Lipsync adjustment for each input source. 117 Auto/Manual Select Selects the method to adjust the delay between video and audio output. 117 Adjustment Adjusts the delay between video and audio output manually. 117 Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 117 Max Volume Sets the maximum volume to prevent excessive loudness.
PAGE 112
Menu Item Function Page Zone Rename Changes the zone name (for main zone) displayed on the front display or TV screen. 124 Volume Enables/disables volume adjustments for Zone2 output. 124 Max Volume Sets the Zone2 maximum volume to prevent excessive loudness in the second zone. 124 Initial Volume Sets the Zone2 initial volume for when the unit is turned on. 125 Audio Delay Adjusts the Zone2 audio output timing. 125 Mono Switches between stereo and monaural for Zone2 output.
PAGE 113
■ Setting Data Copy Speaker (Manual Setup) Copies the “Setting Pattern” parameters in the specified direction. Configures the speaker settings manually. Choices Pattern1 > 2 Copies the “Pattern1” parameters to “Pattern2”. Pattern2 > 1 Copies the “Pattern2” parameters to “Pattern1”. • Some speaker settings are not available depending on the selected “Power Amp Assign” setting. • Default settings are underlined. ■ Power Amp Assign Selects a speaker system. The unit has 7 built-in amplifiers.
PAGE 114
Front Surround Back Selects the size of the front speakers. Selects whether or not surround back speakers are connected and their sizes. Settings Settings Large Select this option for large speakers. The front speakers will produce all of the front channel frequency components. Large x1 Select this option when one large speaker is connected. The surround back speaker will produce all of the surround back channel frequency components. Small Select this option for small speakers.
PAGE 115
Subwoofer • This setting is not available when “Configuration (Front Presence)” is set to “None”. Selects whether or not a subwoofer is connected and its phase. • To play Dolby Atmos contents using the front presence speakers, see “Presence speaker layout” (p.19). Settings Normal Select this option when a subwoofer is connected (phase not reversed). The subwoofer will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels.
PAGE 116
■ Parametric EQ 5 Adjusts the tone with an equalizer. Frequency: Use the cursor keys (e/r) to adjust the center frequency of the selected band and the cursor keys (q/w) to adjust the gain. Settings Manual Select this option when you want to adjust the equalizer manually. For details, see “Manual equalizer adjustment”. Q: Use the cursor keys (e/r) to adjust the Q factor (bandwidth) of the selected band and the cursor keys (q/w) to adjust the gain.
PAGE 117
Sound Adjustment Configures the audio output settings. Adjusts the delay between video and audio output manually when “Auto/Manual Select” is set to “Manual”. You can fine-adjust the audio output timing when “Auto/Manual Select” is set to “Auto”. ■ Lipsync Setting range 0 ms to 500 ms (1 ms increments) Adjusts the delay between video and audio by holding up the audio output. Delay Enable Enables/disables the Lipsync adjustment for each input source.
PAGE 118
■ Initial Volume ■ Virtual Surround Back Speaker Sets the initial volume when the receiver is turned on. Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. When VSBS is enabled, the unit creates VSBS when no surround back speakers are connected. Settings Off Sets the level to the volume level of the unit when it last entered standby mode. On Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB increments).
PAGE 119
Video Aspect Configures the video output settings. Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to “Processing”. Settings Through Does not convert the aspect ratio. 16:9 Normal Outputs 4:3 video signals to a 16:9 TV with black bands on either side of the screen. • This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or 2160p (4K) signals.
PAGE 120
HDMI ARC Configures the HDMI settings. Enables/disables ARC (p.154) when “HDMI Control” is set to “On”. Settings Off Disables ARC. On Enables ARC. • You do not need to change this setting normally. In case noises are produced from the speakers connected to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off” and use the TV’s speakers.
PAGE 121
HDMI OUT1, HDMI OUT2 Network Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack or HDMI OUT 2 jack. Configures the network settings. Settings Off Disables the audio output from the TV. On Enables the audio output from the TV. • The HDMI OUT 1–2 jacks output 2-channel audio signals when the unit is turned on. ■ Standby Through ■ Network Connection Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
PAGE 122
■ MAC Address Filter ■ Manual network settings 1 2 Sets the MAC address filter to limit access to the unit from other network devices. Set “DHCP” to “Off”. Use the cursor keys (q/w) to select a parameter type and press ENTER. Filter IP Address Specifies an IP address. Enables/disables the MAC address filter. Subnet Mask Specifies a subnet mask. Settings Default Gateway Specifies the IP address of the default gateway. Off Disables the MAC address filter.
PAGE 123
■ Network Name Bluetooth Edits the network name (the unit’s name on the network) displayed on other network devices. Configures the Bluetooth settings. ■ Procedure 1 2 Press ENTER to enter the name edit screen. Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry. ■ Bluetooth Enables/disables the Bluetooth function (p.69). Settings Off Disables the Bluetooth function. On Enables the Bluetooth function. • To clear the entry, select “CLEAR”.
PAGE 124
Multi Zone 3 Use the cursor keys to select “OK” and press ENTER. Configures the multi zone settings. • To restore the default setting, select “RESET”. 4 To exit from the menu, press ON SCREEN. ■ Zone2 Set Configures the Zone2 settings. Volume Enables/disables volume adjustments for Zone2 output. ■ Main Zone Set If you have connected an external amplifier with volume control to the unit, disable volume adjustments for Zone2. Configures the main zone setting.
PAGE 125
Initial Volume ■ Monitor Out Assign Sets the Zone2 initial volume for when the unit is turned on. Select the zone for which the MONITOR OUT/ZONE OUT (COMPONENT VIDEO and VIDEO) jacks are used. Settings Settings Main, Zone2 Off Sets the level at the volume level of the unit when it last entered standby mode. On Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB increments). (This setting works only when the initial volume is set lower than “Max Volume”.
PAGE 126
Function 3 To exit from the menu, press ON SCREEN. Configures the functions that make the unit easier to use. • You cannot assign both COAXIAL and OPTICAL jacks to the same input source. ■ Display Set Configures the settings related to the front display and TV screen display. Dimmer (Front Display) Adjusts the brightness of the front display. Setting range -4 to 0 (higher to brighten) ■ Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source.
PAGE 127
■ Trigger Output1, Trigger Output2 Target Zone Sets the TRIGGER OUT 1–2 jacks to function in sync with the power status of each zone or input switching. Specifies the zone with which the TRIGGER OUT jack functions are synchronized. Settings Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. Main When “Trigger Mode” is set to “Power”, electronic signal transmission is synchronized with the power status of the main zone.
PAGE 128
■ ECO Mode ECO Enables/disables the eco (power saving) mode. Configures the power supply settings. When the eco mode is enabled, you can reduce the unit’s power consumption. Settings Off Disables the eco mode. On Enables the eco mode. • The new setting will take effect after the unit is restarted. • When “ECO Mode” is set to “On”, the front panel display may become dark. • If you want to play audio at high volume, set “ECO Mode” to “Off”.
PAGE 129
Types of information Viewing information about the unit (Information menu) ■ Audio Signal You can view information about the unit using the TV screen. 1 2 Displays information about the current audio signal. Press ON SCREEN. Use the cursor keys to select “Information” and press ENTER. Format Audio format of the input signal Channel The number of source channels in the input signal (front/surround/LFE) For example, “5.1 (3/2/0.1)” means 5.
PAGE 130
■ Network ■ System Displays the network information on the unit. Displays the system information on the unit. (When using wired or wireless [Wi-Fi] network connection) Remote ID The unit’s remote control ID setting (p.132) IP Address IP address TV Format The unit’s video signal type (p.132) Subnet Mask Subnet mask Speaker Impedance The speaker impedance setting of the unit (p.131) Default Gateway The IP address of the default gateway Tuner Freq.
PAGE 131
ADVANCED SETUP menu items Configuring the system settings (ADVANCED SETUP menu) • Default settings are underlined. Configure the system settings of the unit while viewing the front display. 1 2 Set the unit to standby mode. While holding down STRAIGHT on the front panel, press MAIN ZONE z. MAIN ZONE z Function SPEAKER IMP. Changes the speaker impedance setting. 131 REMOTE SENSOR Turns on/off of the remote control sensor on the main unit. 132 REMOTE CON AMP Selects the unit’s remote control ID.
PAGE 132
Turning on/off the remote control sensor (REMOTE SENSOR) SP IMP. - DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 ENHANCER SLEEP HD 3 REMOTE SENSOR ON Changing the FM/AM tuning frequency setting (TUNER FRQ STEP) (Asia and General models only) MUTE VOLUME ADAPTIVE DRC DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 SLEEP PL L C R PR SL SW1 SW SW2 SR PL SBL SB SBR PR HD 3 Turn on/off the remote control sensor on the main unit.
PAGE 133
Removing the limitation on HDMI video output (MONITOR CHECK) Backing up/recovering the settings (RECOV./BACKUP) SP IMP. - SP IMP. - DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 ENHANCER SLEEP HD 3 MONITOR CHECK YES DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 ENHANCER SLEEP HD 3 RECOV.
PAGE 134
Updating the firmware (FIRM UPDATE) SP IMP. - DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 ENHANCER SLEEP HD 3 FIRM UPDATE USB Checking the firmware version (VERSION) SP IMP. - DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 ENHANCER SLEEP MUTE VOLUME ADAPTIVE DRC PL L C R PR SL SW1 SW SW2 SR PL SBL SB SBR PR HD 3 New firmware that provides additional features or product improvements will be released as needed.
PAGE 135
Updating the unit’s firmware via the network AV 1 5 2 3 4 6 7 V-AUX New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. AUDIO 1 2 3 PHONO TUNER BLUETOOTH USB NET PARTY HDMI OUT MAIN ZONE 2 1 2 3 4 BD/DVD TV NET RADIO • Do not operate the unit or disconnect the power cable or network cable during firmware update.
PAGE 136
APPENDIX Frequently asked questions The new speaker system does not provide an ideal sound balance... enable HDMI Control on each device and perform the HDMI Control link setup. This setup is required every time you add a new HDMI Control-compatible device to your system. For information on how HDMI Control works between your TV and playback devices, refer to the instruction manuals for each device.
PAGE 137
Troubleshooting Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the following: a The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely.
PAGE 138
Problem The unit cannot be controlled using the remote control. Cause Remedy The unit is out of the operating range. Use the remote control within the operating range (p.5). The batteries are weak. Replace with new batteries. The unit’s remote control sensor is exposed to direct sunlight or strong lighting. Adjust the lighting angle, or reposition the unit. (China, Korea, U.K. and Europe models only) The remote control is set to control external devices.
PAGE 139
Problem No sound is coming from the subwoofer. No sound from the playback device (connected to the unit with HDMI). No sound from the TV (when HDMI Control is used). Only the front speakers work on multichannel audio. Cause Remedy The playback source does not contain LFE or low-frequency signals. To check if the subwoofer is working properly, use “Test Tone” in the “Setup” menu (p.116). Subwoofer output is disabled. Perform “Auto Setup” (p.39) or set “Subwoofer” in the “Setup” menu to “Use” (p.
PAGE 140
Video Problem No video. No video from the playback device (connected to the unit with HDMI). Cause Remedy Another input source is selected on the unit. Select an appropriate input source with the input selection keys. Another input source is selected on the TV. Switch the TV input to display the video from the unit. The video signal output from the unit is not supported by the TV. Set “MONITOR CHECK” in the “ADVANCED SETUP” menu to “YES” (p.133).
PAGE 141
FM/AM radio Problem Cause Remedy There is multi-path interference. Adjust the FM antenna height or orientation, or place it in a different location. Set “FM Mode” in the “Option” menu to “Mono” to select monaural FM radio reception (p.100). FM radio reception is weak or noisy. Your area is too far from the FM station transmitter. Use an outdoor FM antenna. We recommend using a sensitive multi-element antenna. AM radio reception is weak or noisy.
PAGE 142
Bluetooth Problem A Bluetooth connection cannot be established. No sound is produced, or the sound is interrupted during playback. Cause Remedy The Bluetooth function of the unit is disabled. Enable the Bluetooth function (p.123). Another Bluetooth device is already connected to the unit. Terminate the current Bluetooth connection and then establish a new connection (p.69). The unit and the Bluetooth device are too far apart. Move the Bluetooth device closer to the unit.
PAGE 143
USB and network Problem Cause Remedy The USB device is not connected to the USB jack securely. Turn off the unit, reconnect your USB device, and turn the unit on again. The file system of the USB device is not FAT16 or FAT32. Use a USB device with FAT16 or FAT32 format. Folders and files in the USB device cannot be viewed. The data in the USB device is protected by the encryption. Use a USB device without an encryption function. The files in the USB device cannot be played back continuously.
PAGE 144
Problem The Internet radio cannot be played. The iPod does not recognize the unit when using AirPlay. Cause Remedy The selected Internet radio station is currently not available. There may be a network problem at the radio station, or the service may have been stopped. Try the station later or select another station. The selected Internet radio station is currently broadcasting silence. Some Internet radio stations broadcast silence at certain of times of the day.
PAGE 145
Error indications on the front display Message Cause Remedy Access denied Access to the PC is denied. Configure the sharing settings and select the unit as a device to which music contents are shared (p.76). The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. The unit cannot access the iPod. Turn off the iPod and turn it on again. The connected iPod is not supported by the unit.
PAGE 146
Glossary Audio information Dolby Pro Logic IIx Dolby Pro Logic IIx enables 7-channel playback from 2-channel or multichannel sources. There are three modes available: “Music mode” for music sources, “Movie mode” for movie sources and “Game mode” for game sources (for 2-channel sources only). ■ Audio decoding format Dolby Surround Dolby Atmos Dolby surround is a next generation surround technology that intelligently up mixes stereo; 5.1 and 7.1 content for playback through your surround speaker system.
PAGE 147
■ Others DTS-HD Master Audio DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition home theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This technology is used for audio on BD (Blu-ray discs). Bi-amplification connection (Bi-amp) A bi-amplification connection uses two amplifiers for a speaker.
PAGE 148
HDMI and video information Network information Component video signal SSID With the component video signal system, the video signal is separated into the Y signal for luminance and the Pb and Pr signals for chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent. SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point.
PAGE 149
Yamaha technologies CINEMA DSP (Digital Sound Field Processor) Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions (such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are differences in the sound that you hear.
PAGE 150
■ File formats Supported devices and file formats ❑ USB/PC (NAS) ■ Supported devices Sampling frequency (kHz) Quantization bitrate (bit) Bitrate The number of channels Gapless playback WAV * 32/44.1/48/88.2/96/ 176.4/192 16/24 — 2 ✔ • A Bluetooth device may not be detected by the unit or some feature may not be compatible, depending on the model. MP3 32/44.1/48 — 8 to 320 2 — WMA 32/44.1/48 — 8 to 320 2 — ❑ USB devices MPEG-4 AAC 32/44.
PAGE 151
Video signal flow Video signals input from a video device to the unit are output to a TV as shown below. ■ Video conversion table • You can select the resolution and the aspect ratio applied to HDMI-output video processing in “Video Mode” (p.119) in the “Setup” menu. • The unit does not convert 480-line and 576-line video signals interchangeably.
PAGE 152
Multi-zone output Information on HDMI ■ Audio output Using the unit’s internal amplifier (p.25) HDMI Control Using an external amplifier (p.87) Zone2 Out HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations.
PAGE 153
d Use the cursor keys (e/r) to select “HDMI”. (Example) HDMI Control HDMI Control Turns on and displays video from the playback device Playback starts Press SCENE (BD/DVD) To use HDMI Control, you need to perform the following HDMI Control link setup after connecting the TV and playback devices. e Use the cursor keys (q/w) to select “HDMI Control” and press ENTER. For details on settings and operating your TV, refer to the instruction manual for the TV. f Use the cursor keys to select “On”.
PAGE 154
Audio Return Channel (ARC) HDMI signal compatibility ARC allows you to input TV audio to the unit with the HDMI cable which transmits video signal to the TV. Audio signals Check the following after the HDMI Control settings.
PAGE 155
Reference diagram (rear panel) HDMI (HDCP2.2) HDMI OUT (HDCP2.2) 2 (ZONE OUT) 1 AV 1 AV 2 AV 3 NETWORK AV 4 AV 5 AV 6 ( 3 NET ) WIRELESS AV 7 (1 BD/DVD) ARC AC IN AV 1 AV 2 (1 BD/DVD) AV 3 AV 4 MONITOR OUT/ ZONE OUT PB Y COMPONENT VIDEO Y PR AV 2 PB TRIGGER OUT PR B 1 REMOTE 12V 0.1A MAX.
PAGE 156
Trademarks Bluetooth protocol stack (Blue SDK) Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Pro Logic, Surround EX, and the double-D symbol are trademarks of Dolby Laboratories. Copyright 1999-2014 OpenSynergy GmbH All rights reserved. All unpublished rights reserved. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Identifier Mark is a mark of the Wi-Fi Alliance. This receiver supports network connections.
PAGE 157
Specifications Input jacks Other jacks TUNER • Analog Audio • YPAO MIC x 1 • Analog Tuner Audio x 9 (AV 1–4, AUDIO 1–3, PHONO, V-AUX) [U.K.
PAGE 158
Compatible Decoding Formats • Decoding Format - Dolby Atmos - Dolby TrueHD, Dolby Digital Plus - Dolby Digital, Dolby Digital EX - DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Express - DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1 - DTS Digital Surround • Rated Output Power (1-channel driven) (1 kHz, 0.9% THD, 6 ) PRE OUT Front L/R ..................................................................
PAGE 159
• Tone Control Characteristics Main Zone Bass Boost/Cut .........................±6.0 dB/50 Hz (0.5 dB Step) Bass Turnover............................................................. 350 Hz Treble Boost/Cut ..................... ±6.0 dB/20 kHz (0.5 dB Step) Treble Turnover .......................................................... 3.5 kHz Zone2 Bass Boost/Cut .........................±6.0 dB/50 Hz (0.5 dB Step) • Signal to Noise Ratio (IHF) • Standby Power Consumption Mono/Stereo .......................
PAGE 160
Index Symbols Exclamation mark (!) Lock icon (o) 127 Dimmer (Front Display) 126 DLNA 76 DMC (Digital Media Controller) 102 Dolby Atmos 17, 38, 59, 118 DSP Program (front display information) 130, 135 Numerics 2.1-channel system 18 2ch Stereo 62 4K Ultra HD 154 5.1-channel system 18 7.1+2-channel system 17 7.
PAGE 161
Straight decode 63 Subwoofer Trim 99 Surround decoder 63 T Test Tone 116 Tone Control 98 Trigger function 36, 127 U USB storage device content playback 73 V Virtual CINEMA FRONT 18, 62 Virtual Presence Speaker (VPS) 17 Virtual Surround Back Speaker (VSBS) 17, 118 W Wallpaper 126 Web control 93 Wireless (Wi-Fi) 48, 121 Wireless Direct 54, 121 WPS 50 Y YPAO (Yamaha Parametric room Acoustic Optimizer) YPAO Volume 98 39 Z Zone2 85, 124 En 161