Owner’s Manual

En 100
Enables/disables the high-resolution mode when “Enhancer” is set to “On”. If this
function is set to “On”, you can enhance the quality of uncompressed digital audio
(such as 2-channel PCM and FLAC) using Compressed Music Enhancer.
Settings
■ Video Processing (Video Process.)
Enables/disables the video signal processing (resolution and aspect ratio) settings
configured in “Processing” (p.119) in the “Setup” menu.
Settings
■ Input Settings (Input Settings)
Configures the input settings.
• This setting is applied separately to each input source.
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
Setting range
-6.0 dB to 0.0 dB
to +6.0 dB (0.5 dB increments)
Selects the audio input jack to use when more than one audio connection is made
for one input source.
Settings
Selects a video to be output with the audio input source.
Settings
■ FM Mode (FM Mode)
Switches between stereo and monaural for FM radio reception.
Settings
Hi-Res Mode (HiRes Mode)
On (On)
Enables the high-resolution mode.
(The high-resolution mode may not work depending on the audio
signal processing condition.)
Off (Off) Disables the high-resolution mode.
Direct
(Direct) Disables the video signal processing.
Processing
(Processing)
Enables the video signal processing.
Input Trim (In.Trim)
Audio Select (A.Sel)
Auto (Auto)
Automatically selects the audio input jack in the following priority order.
1. HDMI input
2. Digital input (COAXIAL or OPTICAL)
3. Analog input (AUDIO)
HDMI (HDMI)
Always selects HDMI input. No sounds are produced when no signals
are input through the HDMI jack.
Coax/Opt (Coax/Opt)
Always selects digital input (COAXIAL or OPTICAL). No sounds are
produced when no signals are input through the COAXIAL or OPTICAL
jack.
Analog (Analog)
Always selects analog input (AUDIO). No sounds are produced when
no signals are input through the AUDIO jacks.
Video Out (V.Out)
Off (Off) Does not output video.
AV 1–7 (AV1–7),
V-AUX (V-AUX)
Outputs video input through the corresponding video input jacks.
Stereo
(Stereo) Receives FM radio in stereo sounds.
Mono (Mono) Receives FM radio in monaural sounds.