Owner’s Manual

En 110
Network
Network Connection Selects the network connection method. 120
IP Address Configures the network parameters (such as IP address). 120
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 121
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 121
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 122
Bluetooth
Bluetooth Enables/disables the Bluetooth functions. 122
Audio Receive
Disconnect Terminates the Bluetooth connection between the Bluetooth device (such as smartphones) and the unit. 70
Bluetooth Standby Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby). 122
Audio Send
Transmitter Enables/disables the Bluetooth audio transmitter function. 123
Device Search Searches available Bluetooth devices (speakers/headphones) when the unit is used as a Bluetooth audio transmitter. 71
Multi Zone
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the front display or TV screen. 123
Zone2 Set
Volume Enables/disables volume adjustments for Zone2 output. 124
Max Volume Sets the Zone2 limit value of the volumes. 124
Initial Volume Sets the Zone2 initial volume for when the unit is turned on. 124
Audio Delay Adjusts the Zone2 audio output timing. 124
Mono Switches between stereo and monaural for Zone2 output. 124
Enhancer Enables/disables Compressed Music Enhancer for Zone2 output. 124
Tone Control Adjusts the level of high-frequency range and low-frequency range for Zone2 output. 124
Extra Bass Enables/disables Extra Bass for Zone2 output. 125
Zone Rename Changes the zone name (for Zone2) displayed on the front display or TV screen. 125
Monitor Out Assign Select the zone for which the MONITOR OUT/ZONE OUT jacks are used. 125
HDMI OUT2 Assign Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used. 125
Party Mode Set Enables/disables switching to the party mode. 125
Function
Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source. 126
Display Set
Dimmer (Front Display) Adjusts the brightness of the front display. 126
Short Message Selects whether to display short messages on the TV screen when the unit is operated. 126
Wallpaper Selects the image to be used as wallpaper on the TV. 126
Trigger Output1
Trigger Output2
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 127
Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. 127
Memory Guard Prevents accidental changes to the settings. 127
Menu Item Function Page