Owner's Manual

En 107
■ Tone Control (Tone Control)
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to 0.0
dB to +6.0 dB, *0.5 dB increments
Y
• When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears.
• If you set an extreme value, sounds may not match those from other channels.
X
You can also adjust the “Tone Control” setting with the front panel controls by pressing TONE CONTROL
repeatedly to select “Treble” or “Bass”, and PROGRAM to make an adjustment.
■ YPAO Volume (YPAO Volume)
Enables/disables YPAO Volume or Adaptive DRC.
YPAO Volume (YPAO Vol.)
Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and low-frequency
levels are automatically adjusted according to the volume so that you can enjoy natural
sounds even at low volume.
Settings
X
• YPAO Volume works effectively after the measurement results of “Auto Setup” have been already saved (p.43).
• We recommend enabling both YPAO Volume and Adaptive DRC when you are listening at lower volumes or at
night.
Adaptive DRC (A.DRC)
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when
the volume level is adjusted. When it is set to “On”, it is useful for listening to playback at a low
volume at night.
Settings
If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a high
volume.
Input Settings
(Input Settings)
Input Trim
(In.Trim)
Corrects volume differences between input sources. 109
Audio Select
(A.Sel)
Selects the audio input jack to use when more than one
audio connection is made for one input source.
109
Video Out
(V.Out)
Selects a video to be output with the audio input source. 110
FM Mode
(FM Mode)
Switches between stereo and monaural for FM radio
reception.
110
Init Scan
(Init Scan)
(Australia, U.K., Europe and Russia models only)
Performs an initial scan for DAB radio reception.
72
Tune AID
(Tune AID)
(Australia, U.K., Europe and Russia models only)
Checks reception strength of each DAB channel label.
74
Shuffle
(Shuffle)
Configures the shuffle setting for the USB storage device
(p.84) or media server (p.88).
-
Repeat
(Repeat)
Configures the repeat setting for the USB storage device
(p.84) or media server (p.88).
-
Item Function Page
Off (Off) Disables YPAO Volume.
On (On)Enables YPAO Volume.
Off
(Off) The dynamic range is not automatically adjusted.
On (On) Automatically adjusts the dynamic range when YPAO Volume is enabled.
Volume: low Volume: high
Input level Input level
On
Off
On
Off
Output level
Output level