Owner's Manual

En 135
Zone2 Set
Configures the Zone2 settings.
Volume
Enables/disables volume adjustments for Zone2 output.
If you have connected an external amplifier with volume control to the unit, disable volume
adjustments for Zone2.
Settings
X
This setting is not available depending on the “Power Amp Assign” setting.
Max Volume
Sets the Zone2 limit value of the volumes.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5
dB
X
This setting is available only when “Volume” is set to “Variable”.
Initial Volume
Sets the Zone2 initial volume for when the unit is turned on.
Settings
X
This setting is available only when “Volume” is set to “Variable”.
Audio Delay
Adjusts the Zone2 audio output timing so that the audio is synchronized with the video.
Setting range
0
ms to 100 ms (1 ms increments)
Mono
Switches between stereo and monaural for Zone2 output.
Settings
Enhancer
Enables/disables Compressed Music Enhancer (p.68) for Zone2 output.
Settings
Tone Control
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) for Zone2
output.
Settings
Fixed Disables volume adjustments for Zone2 output.
Variable
Enables volume adjustments for Zone2 output.
Off
Sets the level at the volume level of the unit when it last entered standby mode.
On
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB increments).
(This setting works only when the initial volume is set lower than “Max Volume”.)
Off Produces stereo sounds in Zone2.
On Produces monaural sounds in Zone2.
Off Disables Compressed Music Enhancer.
On
Enables Compressed Music Enhancer.
Auto
Adjusts the levels of the high-frequency range (Treble) and low-frequency range
(Bass) automatically in synchronization with the main volume, with correction for
the auditory response of the human ear.
Manual
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)
manually (-6.0 to +6.0 dB, 0.5 dB increments).
Bypass
Does not adjust the level of high-frequency range (Treble) and low-frequency
range (Bass).