Owner's Manual

En 14
a PHONO jacks
For connecting to a turntable (p.36).
b AUDIO 1-3 jacks
For connecting to audio playback devices and inputting audio signals (p.36).
c AV 1-4 jacks
For connecting to video/audio playback devices and inputting video/audio signals (p.34).
d HDMI OUT 1 jack
For connecting to an HDMI-compatible TV and outputting video/audio signals (p.32). When using ARC, TV
audio signal can also be input through the HDMI OUT 1 jack.
HDMI OUT 2 (ZONE OUT) jack
For connecting to an HDMI-compatible TV and outputting video/audio signals (p.33), or for connecting to
an HDMI-compatible device used in Zone2 (p.96).
e COMPONENT VIDEO (AV 1-2) jacks
For connecting to video playback devices that support component video and inputting video signals
(p.34).
f HDMI (AV 1-7) jacks
For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.34).
g TRIGGER OUT 1-2 jacks
For connecting to devices that support the trigger function (p.40).
h REMOTE IN/OUT jacks
For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other
devices from another room (p.96).
i NETWORK jack
For connecting to a network with a network cable (p.39).
j Wireless antenna
For a wireless (Wi-Fi) connection to a network (p.51) and a Bluetooth connection (p.80).
k RS-232C terminal
This is a control expansion terminal for custom installation. Consult your dealer for details.
l VOLTAGE SELECTOR
(Brazil and General models only)
Selects the switch position according to your local voltage (p.40).
m AC IN jack
For connecting the supplied power cable (p.40).
n ANTENNA jacks
For connecting to radio antennas (p.38).
o ZONE OUT jacks
For connecting to the external amplifier used in Zone2 and for outputting audio (p.95).
p SPEAKERS terminals
For connecting to speakers (p.17).
q PRE OUT jacks
For connecting to a subwoofer with built-in amplifier (p.23) or to an external power amplifier (p.31).