Owner's Manual

En 143
ADVANCED SETUP menu items
X
Default settings are underlined.
Changing the speaker impedance setting
(SPEAKER IMP.)
Change the unit’s speaker impedance settings depending on the impedance of the speakers
connected.
Settings
Turning on/off the remote control sensor
(REMOTE SENSOR)
Turn on/off the remote control sensor on the main unit. While the remote control sensor is
turned off, you cannot control the unit from the remote control.
Settings
Item Function Page
SPEAKER IMP. Changes the speaker impedance setting. 143
REMOTE SENSOR Turns on/off of the remote control sensor on the main unit. 143
REMOTE ID Selects the unit’s remote control ID. 144
TUNER FRQ STEP
(Brazil, Asia and General models only)
Changes the FM/AM tuning frequency setting.
144
TV FORMAT Switches the video signal type. 144
MONITOR CHECK Removes the limitation on HDMI video output. 144
4K MODE Selects the HDMI 4K (60 Hz/50 Hz) signal format. 145
DTS MODE Switches the DTS format notification setting. 145
RECOV./BACKUP
Creates backup of the settings of the unit, or recovers the settings from
the backup.
145
INITIALIZE Restores the default settings. 146
FIRM. UPDATE Updates the firmware. 146
VERSION Checks the version of firmware currently installed on the unit. 146
6 Ω MIN
Select this option when you connect 6-ohm speakers to the unit. You can also use
4-ohm speakers as the front speakers.
8 Ω MIN
Select this option when you connect 8-ohm or higher speakers to the unit.
ON
Turns on the remote control sensor.
OFF Turns off the remote control sensor.
8¬MIN
SPEAKER¡IMP.
ON
REMOTE SENSOR