Owner's Manual

En 145
Selecting the HDMI 4K signal format (4K MODE)
Selects the format of signals input/output at the unit when HDMI 4K compatible TV and
playback device are connected to the unit.
Settings
Format
Y
•When “MODE 1” is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with
Ethernet.
• Regardless of the setting, 4K signals are input as “MODE 2” for the VIDEO AUX (HDMI IN) jack.
Switching the DTS format notification setting (DTS MODE)
Switches the DTS format notification setting.
This setting informs the video device (such as BD/DVD player) about the DTS formats that the
unit supports.
Settings
Backing up/recovering the settings (RECOV./BACKUP)
Creates backup of the settings of the unit, or recovers the settings from the backup.
■ Backup/recovery procedure
1
Press STRAIGHT repeatedly to select “BACKUP” or “RECOVERY” and press INFO to start the
process.
Choices
MODE 1
Inputs/outputs 4K signals shown in the table below.
Depending on the connected device or HDMI cables, video may not be displayed
correctly. In this case, select “MODE 2”.
MODE 2 Inputs/outputs 4K signals shown in the table below.
MODE 1 MODE 2
8 bit 10 bit 12 bit 8 bit 10 bit 12 bit
4K/60, 50 Hz
RGB 4:4:4 ,- -
YCbCr 4:4:4 ,- -
YCbCr 4:2:2 ,-
YCbCr 4:2:0 ,,-
4K/30, 25, 24 Hz
RGB 4:4:4 ,,-
YCbCr 4:4:4 ,,-
YCbCr 4:2:2 ,,
MODE 1
4K MODE
MODE 1
This mode conforms to the DTS:X standard.
Use this setting under normal circumstances.
MODE 2
Use this setting if the video device (such as BD/DVD player) fails to properly
output a DTS signal even when it is playing back DTS-HD or DTS:X content.
BACKUP Creates backup of the settings of the unit in the internal memory.
RECOVERY
Recovers the settings of the unit from the backup (available only when
backup has been created).
Note
• Do not turn off the unit during the recovery process. Otherwise, the settings may not be restored
correctly.
• The backup does not contain user information (such as user accounts and passwords).
MODE 1
DTS MODE
BACKUP
RECOV./BACKUP