User's Manual

En 10

Part names and functions

This section explains the functions of the parts of the unit.

Front panel

a MAIN ZONE z key

Turns on/off (standby) the main zone.

Zone2 can be turned on/off individually (p.96).

b Standby indicator

Lights up when the unit is in standby mode under any of the

following conditions.

• HDMI Control is enabled (p.124)

• HDMI Standby Through is enabled (p.125)

• Network Standby is enabled (p.127)

• Bluetooth Standby is enabled (p.129)

c AI indicator

Lights up when the SURROUND:AI is enabled (p.61)

d Front display

Displays information (p.12).

e Remote control sensor

Receives remote control signals (p.6).

f PURE DIRECT key

Enables/disables Pure Direct (p.66).

g INPUT knob

Selects an input source.

h Front panel door

For protecting controls and jacks (p.11).

i VOLUME knob

Adjusts the volume.

Opening the front panel door

To use controls or jacks behind the front panel door, gently

press the bottom of the door to open it. Keep the door closed

when not using controls or jacks behind the front panel door.

(Be careful not to trap your fingers.)

INPUT

MAIN ZONE

VOLUME

PURE DIRECT

fb c d ea