User's Manual

En 143
APPENDIX
Additional Features
The following features were added for product improvements.
Playing back audio from the unit on Bluetooth®-enabled
speakers/headphones
You can output audio played back from the unit on connected Bluetooth speakers or
headphones.
Follow the procedure below to establish a Bluetooth connection between Bluetooth
speakers/headphones and the unit.
1
Use the input selection keys on the remote control to select an input source.
Select an input source other than Bluetooth.
The audio transmission function does not work when Bluetooth is selected as the input
source.
2
Press SETUP on the remote control to display the menu.
3
Use the cursor keys and ENTER to select “Setup” → “Bluetooth” → “Audio
Send”, and then set “Transmitter” to “On”.
4
Select “Device Search” to search the Bluetooth devices.
The list of available Bluetooth devices is displayed.
5
Select the Bluetooth speakers/headphones to be connected with the unit.
Y
If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to the pairing mode
and then select “Device Search”.
When the connection process finishes, Bluetooth indicator lights up in the front display.
Y
• A Bluetooth device with the pass key other than “0000” cannot be connected to the unit.
• If the unit detects the Bluetooth device previously connected, the unit automatically connects to the Bluetooth
device after Step 1. To establish another Bluetooth connection, first terminate the current Bluetooth
connection.
• Terminate a Bluetooth connection with any of the following operations.
– Terminate the connection from the Bluetooth device.
– Set “Transmitter” in the “Setup” menu to “Off”.
• For details on compatible Bluetooth devices, refer to the manual for this unit.
Notice
Audio transmitted via Bluetooth may be delayed. In addition, sound field effects selected on the unit are
not applied.
The unit
Bluetooth speakers/headphones
Notice
• The following audio cannot be transmitted.
– AirPlay and DSD audio
– PCM audio exceeding 192 kHz
– Super Audio CD (SACD) and DVD-Audio
– Audio from radio and external devices connected to this unit, playing back with Pure Direct or Direct
enabled
• When connected to a Bluetooth device that does not support copyright protection technology
(SCMS-T), some content may not be played back.
• Played back audio will also be output from speakers connected to the unit.
• Audio from a Bluetooth device (smartphone, etc.) cannot be played back.