Owner's Manual
Table Of Contents
- Easy Setup Guide
- Owners Manual
- Table of Contents
- Compatibility
- Supplied Accessories
- Parts & Controls
- Features
- Preparations
- General setup procedure
- Connecting speakers
- Connecting a TV
- Connecting playback devices
- Connecting the FM/AM antennas
- Connecting a network cable or the wireless antenna
- Connecting other devices
- Connecting the power cable
- Selecting an on-screen menu language
- Optimizing the speaker settings automatically (YPAO)
- Connecting to a network device wirelessly
- Playback
- Basic playback procedure
- Selecting the input source and favorite settings with one touch (SCENE)
- Selecting the sound mode
- Listening to FM/AM radio
- Playing back iPod music
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Playing back music with AirPlay
- Playing back videos/audio in multiple rooms (multi-zone)
- Controlling the unit from a web browser (web control)
- Viewing the current status
- Configuring playback settings for different playback sources (Option menu)
- Configurations
- Configuring input sources (Input menu)
- Configuring the SCENE function (Scene menu)
- Configuring sound programs/surround decoders (Sound Program menu)
- Configuring various functions (Setup menu)
- Viewing information about the unit (Information menu)
- Configuring the system settings (ADVANCED SETUP menu)
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SPEAKER IMP.)
- Turning on/off the remote control sensor (REMOTE SENSOR)
- Selecting the remote control ID (REMOTE CON AMP)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MONITOR CHECK)
- Backing up/recovering the settings (RECOV./BACKUP)
- Restoring the default settings (INITIALIZE)
- Updating the firmware (FIRM UPDATE)
- Checking the firmware version (VERSION)
- Controlling external devices with the remote control
- Updating the unit’s firmware via the network
- Frequently asked questions
- Troubleshooting
- Error indications on the front display
- Glossary
- Supported devices and file formats
- Video signal flow
- Multi-zone output
- Information on HDMI
- Reference diagram (rear panel)
- Specs
- Index
- Supplement for Web Control
- Quick Guide for Multi-zone and Remote Control Functions
- Supplement for SiriusXM Internet Radio
- Supplement for Rhapsody
- Supplement for Pandora
- Supplement for Spotify
- List of Remote Control Codes
- Additional Information: About Dolby Atmos
- Firmware Updating Procedure
- Scan of CD-ROM
- Warranty
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 122
Video Video Mode Enables/disables the video signal processing (resolution, aspect ratio and video adjustments). 131
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 132
Audio Output Selects a device to output audio. 133
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 133
Network
Network Connection Selects the network connection method. 134
IP Address Configures the network parameters (such as IP address). 134
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 134
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 135
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 135
Multi Zone
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the front display or TV screen. 136
Zone2 Set
Zone3 Set
Vol ume Enables/disables volume adjustments for Zone2 or Zone3 output. 136
Max Volume Sets the Zone2 or Zone3 maximum volume to prevent excessive loudness in the second zone. 136
Initial Volume Sets the Zone2 or Zone3 initial volume for when the unit is turned on. 136
Mono Switches between stereo and monaural for Zone2 or Zone3 output. 137
Zone Scene Rename Changes the scene names (for Zone2 or Zone3) displayed on the front display or TV screen. 137
Zone Rename Changes the zone name (for Zone2 or Zone3) displayed on the front display or TV screen. 137
Zone4 Set
Zone Scene Rename Changes the scene names (for Zone4) displayed on the front display or TV screen. 137
Zone Rename Changes the zone name (for Zone4) displayed on the front display or TV screen. 137
Monitor Out Assign Select the zone for which the MONITOR OUT/ZONE OUT jacks are used. 137
HDMI OUT2 Assign Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used. 138
Party Mode Set Enables/disables switching to the party mode for each zone. 138
Function
Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source. 138
Display Set
Dimmer (Front Display) Adjusts the brightness of the front display. 139
Short Message Selects whether to display short messages on the TV screen when the unit is operated. 139
Wallpaper Selects the image to be used as wallpaper on the TV. 139
Trigger Output1
Trigger Output2
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 139
Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. 140
DC OUT Power Mode Selects how to supply power through the DC OUT jack. 140
Memory Guard Prevents accidental changes to the settings. 140
Menu Item Function Page