Operation Manual

En 131
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 138
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 138
Adjustment Adjusts the delay between video and audio output manually. 139
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 139
Max Volume Sets the maximum volume to prevent excessive loudness. 139
Initial Volume Sets the initial volume for when this receiver is turned on. 139
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 139
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level. 139
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 140
Virtual Presence Speaker
(RX-A3050 only)
Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers. 140
Virtual Surround Back Speaker Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. 140
Object Decode Mode Enables/disables playback of object-based audio signals such as Dolby Atmos contents. 140
Video Video Mode Enables/disables the video signal processing (resolution, aspect ratio and video adjustments). 141
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 143
Audio Output Selects a device to output audio. 143
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 144
Network
Network Connection Selects the network connection method. 144
IP Address Configures the network parameters (such as IP address). 145
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 145
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 146
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 146
Bluetooth
Bluetooth Enables/disables the
Bluetooth functions. 147
Audio Receive Disconnect Terminates the
Bluetooth connection between the Bluetooth device (such as smartphones) and the unit. 86
Bluetooth Standby Selects whether to enable/disable the function that turns on the unit from
Bluetooth devices ( Bluetooth standby). 147
Menu Item Function Page