Owner's Manual
Table Of Contents
- Easy Setup Guide
- Owners Manual
- Table of Contents
- Features
- Supplied Accessories
- Parts & Controls
- Introduction
- Preparations
- General setup procedure
- Connecting speakers
- Connecting a TV and playback devices
- Connecting the FM/AM antennas
- Connecting a network cable or preparing the wireless antenna
- Connecting other devices
- Connecting the power cable
- Selecting an on-screen menu language
- Configuring the necessary speaker settings
- Optimizing the speaker settings automatically (YPAO)
- Connecting to a network device wirelessly
- Connecting to the MusicCast network
- Playback
- Basic playback procedure
- Selecting the input source and favorite settings with one touch (SCENE)
- Selecting the sound mode
- Listening to FM/AM radio
- Playing back music via Bluetooth
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Playing back iTunes/iPod music with AirPlay
- Playing back videos/audio in multiple rooms (multi-zone)
- Registering favorite items (shortcut)
- Controlling the unit from a web browser (web control)
- Viewing the current status
- Configuring playback settings for different playback sources (Option menu)
- Configurations
- Configuring input sources (Input menu)
- Configuring the SCENE function (Scene menu)
- Configuring sound programs/surround decoders (DSP Program menu)
- Configuring various functions (Setup menu)
- Viewing information about the unit (Information menu)
- Configuring the system settings (ADVANCED SETUP menu)
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SPEAKER IMP.)
- Turning on/off the remote control sensor (REMOTE SENSOR)
- Selecting the remote control ID (REMOTE CON AMP)
- Changing the FM/AM tuning frequency setting (TUNER FRQ STEP)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MONITOR CHECK)
- Selecting the HDMI 4K signal format (4K MODE)
- Backing up/recovering the settings (RECOV./BACKUP)
- Restoring the default settings (INITIALIZE)
- Updating the firmware (FIRM UPDATE)
- Checking the firmware version (VERSION)
- Controlling external devices with the remote control
- Updating the unit’s firmware via the network
- Frequently asked questions
- Troubleshooting
- Error indications on the front display
- Glossary
- Supported devices and file formats
- Video signal flow
- Multi-zone output
- Information on HDMI
- List of remote control codes
- Specs
- MusicCast Setup Guide
- Supplement for Pandora
- Supplement for Rhapsody
- Supplement to Listen to SiriusXM
- Supplement for Spotify
- Scan of CD-ROM
- Reset to Factory Default
- Warranty
En 157
Controlling external devices with the remote control
You can use the unit’s remote control to operate external devices (such
as BD/DVD players) if you have registered the remote control code of the
external device.
Y
• You cannot control an external device that does not have a remote control sensor.
• Ensure that the remote control ID of the external device is set to “ID1”. If any other ID
is selected, the remote control operations may not work properly.
• If the unit’s remote control is without batteries for more than 2 minutes, the
registered codes may be cleared. If this happens, insert new batteries and register the
codes again.
X
Under the unit’s default settings, the amplifier code (Yamaha: 5098) is set for all the
input selection keys. With this setting, you can control HDMI Control-compatible
devices connected to the unit with the remote control. (This function may not work
depending on the specification of the external device.)
Registering the remote control code for a
TV
You can use the unit’s remote control to operate a TV if you have
registered its remote control code.
X
You can also register your TV’s remote control code to the unit’s input selection keys
(p.158). This would allow you to use the cursor keys or numeric keys to operate the TV
(this function may not be available on some TV models).
1
See “List of remote control codes” (p.188) to find your
TV’s remote control code.
X
If there are multiple remote control codes, register the first code in the list.
If that does not work, try the other codes.
2
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute. Otherwise,
the setting will be canceled. If this happens, repeat from Step 2.
3
Press TV z.
4
Use the Numeric keys to enter the 4-digit remote control
code.
Once the remote control code is successfully registered, SOURCE blinks
twice.
If it blinks six times, registration has failed. Repeat from Step 2.
⬛ TV operations
Once you have registered the remote control code for your TV, you can
control it using the TV operation keys, regardless of the input source
selected on the unit.
TV operation keys
INPUT Switches the video inputs of the TV.
MUTE Mutes the audio output of the TV.
TV VOL Adjust the volume of the TV.
TV CH Switch the channels of the TV.
TV z Turns on/off the TV.
90
ENT
MEMORY
10
5
687
1234
MOVIE
ENHANCER
TUNING PRESET
BAND
DISPLAYRETURN
ENTER
ON
SCREEN
OPTION
TOP MENU
MUTE
PROGRAM
VOLUME
POP-UP/MENU
PURE DIRECT
STRAIGHT
INFO SLEEP
MUSIC
PARTY HDMI OUT
TUNER
BLUETOOTH
MAIN
ZONE
234
MODE
SCENE
4321
AV
AUDIO
567
V-AUX
1234
123
PHONO
SUR. DECODE
USB
NET
SOURCE
RECEIVER
TV VOL TV CH
TV
INPUT
MUTE
CODE SET
MO
VI
E
ENHAN
C
ER
TU
NIN
G
PRE
S
ET
BAND
DI
S
PLA
Y
RETURN
ENTE
R
O
N
SC
REE
N
O
PTI
ON
T
O
P MEN
U
M
U
T
E
PR
OG
RAM
VO
L
U
ME
PO
P-
U
P
/
MEN
U
P
U
RE DIRE
C
T
S
TRAI
G
H
T
INF
O
S
LEE
P
M
US
I
C
PARTY
HDMI
O
U
T
TUNER
BLUET
OO
TH
MAIN
Z
O
NE
2
3
4
M
O
D
E
SC
EN
E
4
3
2
1
AV
AUDI
O
5
6
7
V
-
AUX
1
2
3
4
1
2
3
PH
O
N
O
SU
R. DE
CO
D
E
U
SB
NET
RECEIVE
R
CODE SET
TV z
SOURCE
Numeric keys
TV operation keys