Owner's Manual
Table Of Contents
- Easy Setup Guide
- Owners Manual
- Table of Contents
- Features
- Supplied Accessories
- Parts & Controls
- Introduction
- Preparations
- General setup procedure
- Connecting speakers
- Connecting a TV and playback devices
- Connecting the FM/AM antennas
- Connecting a network cable or preparing the wireless antenna
- Connecting other devices
- Connecting the power cable
- Selecting an on-screen menu language
- Configuring the necessary speaker settings
- Optimizing the speaker settings automatically (YPAO)
- Connecting to a network device wirelessly
- Connecting to the MusicCast network
- Playback
- Basic playback procedure
- Selecting the input source and favorite settings with one touch (SCENE)
- Selecting the sound mode
- Listening to FM/AM radio
- Playing back music via Bluetooth
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Playing back iTunes/iPod music with AirPlay
- Playing back videos/audio in multiple rooms (multi-zone)
- Registering favorite items (shortcut)
- Controlling the unit from a web browser (web control)
- Viewing the current status
- Configuring playback settings for different playback sources (Option menu)
- Configurations
- Configuring input sources (Input menu)
- Configuring the SCENE function (Scene menu)
- Configuring sound programs/surround decoders (DSP Program menu)
- Configuring various functions (Setup menu)
- Viewing information about the unit (Information menu)
- Configuring the system settings (ADVANCED SETUP menu)
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SPEAKER IMP.)
- Turning on/off the remote control sensor (REMOTE SENSOR)
- Selecting the remote control ID (REMOTE CON AMP)
- Changing the FM/AM tuning frequency setting (TUNER FRQ STEP)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MONITOR CHECK)
- Selecting the HDMI 4K signal format (4K MODE)
- Backing up/recovering the settings (RECOV./BACKUP)
- Restoring the default settings (INITIALIZE)
- Updating the firmware (FIRM UPDATE)
- Checking the firmware version (VERSION)
- Controlling external devices with the remote control
- Updating the unit’s firmware via the network
- Frequently asked questions
- Troubleshooting
- Error indications on the front display
- Glossary
- Supported devices and file formats
- Video signal flow
- Multi-zone output
- Information on HDMI
- List of remote control codes
- Specs
- MusicCast Setup Guide
- Supplement for Pandora
- Supplement for Rhapsody
- Supplement to Listen to SiriusXM
- Supplement for Spotify
- Scan of CD-ROM
- Reset to Factory Default
- Warranty
En 158
Registering the remote control codes for
playback devices
You can use the unit’s remote control to operate playback devices if you
have registered their remote control codes. You can also use the input
selection keys to change the playback devices that are controlled by the
remote control, because their remote control codes are assigned to the
input selection keys.
1
See “List of remote control codes” (p.188) to find the
remote control code for your playback device.
X
If there are multiple remote control codes, register the first code in the list. If
that does not work, try the other codes.
2
P
ress CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute. Otherwise,
the setting will be canceled. If this happens, repeat from Step 2.
3
Press the Input selection key.
For example, press AV 1 to set the remote control code for the
playback device connected to the AV 1 jack.
4
Use the Numeric keys to enter the 4-digit remote control
code.
Once the remote control code is registered successfully, SOURCE blinks
twice.
If it blinks six times, registration has failed. Repeat from Step 2.
X
For details on how to register a remote control code to a SCENE key, refer to
“Registering a scene” (p.76).
⬛ Playback device operations
Once you have registered the remote control code for your playback
device, you can control it using the following keys after selecting the
input source or scene.
X
By pressing SOURCE or RECEIVER, you can switch the devices (the unit or external
device) that are operated by the menu operation keys, DISPLAY and numeric keys. You
can operate the unit after pressing RECEIVER (lights up in orange), and an external
device after pressing SOURCE (lights up in green). For example, if you register the
remote control code of your external device on TUNER, you can operate the unit’s
built-in FM/AM radio after pressing RECEIVER and the external device after pressing
SOURCE.
Y
These keys work only if the corresponding function is available on your playback device
and if the device can be operated with an infrared remote control.
SOURCE z Turns on/off the playback device.
Menu operation
keys
Cursor keys Select an item.
ENTER Confirms a selected item.
RETURN Returns to the previous screen.
DISPLAY Switches information on the display.
External device
operation keys
TOP MENU Displays the top menu.
POP-UP/MENU Displays the pop-up menu.
s Stops playback.
d Stops playback temporarily.
a
Starts playback of the selected
song/video.
h
Searches forward/backward (by
holding down).
j
f
Skips forward/backward.
g
Numeric keys Enter numerical values.
TV operation keys Control the TV (p.157).
90
ENT
MEMORY
10
5
687
1234
MOVIE
ENHANCER
TUNING PRESET
BAND
DISPLAYRETURN
ENTER
ON
SCREEN
OPTION
TOP MENU
MUTE
PROGRAM
VOLUME
POP-UP/MENU
PURE DIRECT
STRAIGHT
INFO SLEEP
MUSIC
PARTY HDMI OUT
TUNER
BLUETOOTH
MAIN
ZONE
234
MODE
SCENE
4321
AV
AUDIO
567
V-AUX
1234
123
PHONO
SUR. DECODE
USB
NET
SOURCE
RECEIVER
TV VOL TV CH
TV
INPUT
MUTE
CODE SET
MO
VI
E
ENHAN
C
ER
O
N
SC
REE
N
O
PTI
ON
M
U
T
E
PR
OG
RAM
VO
L
U
ME
P
U
RE DIRE
C
T
S
TRAI
G
H
T
INF
O
S
LEE
P
M
US
I
C
PARTY
HDMI
O
U
T
MAIN
Z
O
NE
2
3
4
M
O
D
E
SC
EN
E
4
3
2
1
SU
R. DE
CO
D
E
CODE SET
DISPLAY
SOURCE z
SOURCE
RECEIVER
External device
operation keys
Input selection keys
External device
operation keys
Numeric keys
TV operation keys
Menu operation keys