Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Features
- Preparations
- General Setup Procedure
- Connecting Speakers
- Connecting a TV and Playback Devices
- Connecting the Radio Antennas
- Connecting a Network Cable or Preparing the Wireless Antenna
- Connecting Other Devices
- Connecting the Power Cable
- Selecting an On-Screen Menu Language
- Configuring the Necessary Speaker Settings
- Optimizing the Speaker Settings Automatically (YPAO)
- Connecting to a Network Device Wirelessly
- Connecting to the MusicCast Network
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- Playing Back Music via Bluetooth
- Playing Back Music Stored on a USB Storage Device
- Playing Back Music Stored on Media Servers (PCs / NAS)
- Listening to Internet Radio
- Playing Back iTunes / iPod Music with AirPlay
- Playing Back Videos / Audio in Multiple Rooms (Multi-Zone)
- Registering Favorite Items (Shortcut)
- Controlling the Unit from a Web Browser (Web Control)
- Viewing the Current Status
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Configurations
- Configuring Input Sources (Input Menu)
- Configuring the SCENE Function (Scene Menu)
- Configuring Sound Programs / Surround Decoders (DSP Program Menu)
- Configuring Various Functions (Setup Menu)
- Viewing Information About the Unit (Information Menu)
- Configuring the System Settings (ADVANCED SETUP Menu)
- ADVANCED SETUP Menu Items
- Changing the Speaker Impedance Setting (SPEAKER IMP.)
- Turning On / Off the Remote Control Sensor (REMOTE SENSOR)
- Selecting the Remote Control ID (REMOTE ID)
- Changing the FM / AM Tuning Frequency Setting (TUNER FRQ STEP)
- Switching the Video Signal Type (TV FORMAT)
- Removing the Limitation on HDMI Video Output (MONITOR CHECK)
- Selecting the HDMI 4K Signal Format (4K MODE)
- Switching the DTS Format Notification Setting (DTS MODE)
- Backing Up / Recovering the Settings (RECOV. / BACKUP)
- Restoring the Default Settings (INITIALIZE)
- Updating the Firmware (FIRM. UPDATE)
- Checking the Firmware Version (VERSION)
- Controlling External Devices with the Remote Control
- Updating the Unit’s Firmware via the Network
- Frequently Asked Questions
- Troubleshooting
- Error Indications on the Front Display
- Glossary
- Supported Devices and File Formats
- Video Signal Flow
- Multi-Zone Output
- Information on HDMI
- List of Remote Control Codes
- Specs
- Quick Start Guide
- Warranty
En 159
Wallpaper
Selects the image to be used as wallpaper on the TV.
Settings
■ Trigger Output1, Trigger Output2
Sets the TRIGGER OUT 1-2 jacks to function in sync with the power status of each zone or input
switching.
Trigger Mode
Specifies the condition for the TRIGGER OUT jack to function.
Settings
Source
Specifies the output level of the electronic signal transmitted with each input, switching when
“Trigger Mode” is set to “Source”.
Choices
AV 1-7, VIDEO AUX, AUDIO 1-4*, PHONO, TUNER, (network sources), Bluetooth, USB
* AUDIO 4: RX-A3070 only
Settings
Manual
Switches the output level for electronic signal transmission manually when “Trigger Mode” is
set to “Manual”. This setting can also be used to confirm proper function of the external device
connected via the TRIGGER OUT jack.
Choices
Target Zone
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
Settings
Piano
Displays the piano image on the TV screen when there is no video signal.
Gray Displays a gray background on the TV screen when there is no video signal.
Power
The TRIGGER OUT jack functions in sync with the power status of the zone
specified with “Target Zone”.
Source
The TRIGGER OUT jack functions in sync with the input switching in the zone
specified with “Target Zone”.
An electronic signal is transmitted according to the setting made in “Source.”
Manual
Select this to manually switch the output level for electronic signal transmission
with “Manual”.
Low
Stops the electronic signal transmission when you switch to the input source
specified in this option.
High
Transmits the electronic signal when you switch to the input source specified in
this option.
Low Stops the electronic signal transmission.
High
Transmits the electronic signal.
Main
When “Trigger Mode” is set to “Power”, electronic signal transmission is
synchronized with the power status of the main zone.
When “Trigger Mode” is set to “Source”, electronic signal transmission is
synchronized with the input switching in the main zone.
Zone2
When “Trigger Mode” is set to “Power”, electronic signal transmission is
synchronized with the power status of Zone2.
When “Trigger Mode” is set to “Source”, electronic signal transmission is
synchronized with the input switching in Zone2.
Zone3
When “Trigger Mode” is set to “Power”, electronic signal transmission is
synchronized with power status of Zone3.
When “Trigger Mode” is set to “Source”, electronic signal transmission is
synchronized with input switching in Zone3.
Zone4
When “Trigger Mode” is set to “Power”, electronic signal transmission is
synchronized with power status of Zone4.
When “Trigger Mode” is set to “Source”, electronic signal transmission is
synchronized with input switching in Zone4.
All
When “Trigger Mode” is set to “Power”, electronic signal transmission is
synchronized with the power status of any zone.
When “Trigger Mode” is set to “Source”, electronic signal transmission is
synchronized with the input switching in any zone.