manual

En 112
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Optimizes the speaker settings automatically (YPAO). 46
Manual Setup
Setting Pattern Registers two speaker setting patterns and switches between them. 114
Setting Data Copy Copies the “Setting Pattern” parameters in the specified direction. 114
Power Amp Assign Selects a speaker system. 114
Configuration
Front Selects the size of the front speakers. 115
Center Selects whether or not a center speaker is connected and its size. 115
Surround Selects whether or not surround speakers are connected and its size. 115
Surround Back Selects whether or not surround back speakers are connected and its size. 115
Front Presence Selects whether or not front presence speakers are connected. 115
Rear Presence Selects whether or not rear presence speakers are connected. 115
Subwoofer 1
Subwoofer 2
Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or SUBWOOFER 2 jack and its phase. 116
SWFR Layout Selects a subwoofer layout when 2 subwoofers are used. 116
Extra Bass Sets the speakers to produce the front channel low-frequency components. 116
Distance Sets the distance between each speaker and listening position. 116
Level Adjusts the volume of each speaker. 116
Parametric EQ
PEQ Select Selects a type of equalizer to be used. 117
PEQ Data Copy Copies the parametric equalizer values acquired with “Auto Setup” to the “Manual” fields for fine adjustment. 117
Test Tone Enables/disabled the test tone output. 117
Sound
Lipsync Adjusts the delay between video and audio output. 118
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 118
Max Volume Sets the maximum volume so that sound is not too loud. 118
Initial Volume Sets the initial volume for when this receiver is turned on. 118
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 118
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level in conjunction with volume adjustments. 119
Video
Analog to Analog Conversion Enables/disables the video conversion between the analog video jacks. 119
Processing Enables/disables the video signal processing (resolution, aspect ratio and video adjustments). 120
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (ARC, TV audio input, etc). 122
Audio Output Selects a device to output audio. 123
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when this unit is in standby mode. 123