Setup guide

ManualsBrandsYamaha ManualsAV receiversRX-A3010

Check that the following accessories are supplied with this product.

You need to separately prepare the following cables to build the system based on this

document.

■ Speaker cables (x 9)

■ HDMI cable (x 2)

■ Audio pin cable (x 1)

■ Digital optical cable or stereo pin cable (x 1) (unnecessary if your TV supports ARC)

1 Preparations

Accessories

■ Remote control ■ Batteries (AAA, LR03, UM-4) (x 4)

Insert into the remote control in the correct polarity (+/-)

■ Simplified remote control ■ Power cable

* The figure of the supplied power cable differs depending

on regions.

■ YPAO microphone ■ Microphone base

* Used for angle

measurement

during YPAO.

■ AM antenna ■ FM antenna

* The figure of the supplied

FM antenna differs

depending on regions.

■

CD-ROM

(Owner’s Manual)

■ Safety Brochure ■ Easy Setup Guide

(this document)

Cables necessary for connections

Easy Setup Guide

English for Canada, Europe, Asia,

Africa, Oceania and Latin America

AV Receiver

This document explains how to set up a 9.1-channel system and

play back surround sound of a BD/DVD on this unit.

For more information, refer to “Owner’s Manual” on the supplied

CD-ROM.

A PDF format of this guide and “Owner’s Manual” can be downloaded

from the following website.

http://download.yamaha.com/

Summary of content (8 pages)

PAGE 1
Preparations Accessories AV Receiver Easy Setup Guide English for Canada, Europe, Asia, Africa, Oceania and Latin America Check that the following accessories are supplied with this product. ■ Remote control ■ Batteries (AAA, LR03, UM-4) (x 4) ■ Simplified remote control ■ Power cable Insert into the remote control in the correct polarity (+/-) * The figure of the supplied power cable differs depending on regions. ■ YPAO microphone ■ Microphone base * Used for angle measurement during YPAO.
PAGE 2
Placing the speakers Set up the speakers in the room by using the following diagram as a reference. For information on speaker systems other than the 9.1-channel system, refer to “Owner’s Manual”. 0.5 to 1 m 0.5 to 1 m 1.8 m 1.
PAGE 3
Connecting the speakers/subwoofer • This unit is configured for 8-ohm speakers at the factory. When connecting 6-ohm speakers, set the speaker impedance of this unit to “6 Ω MIN”. For details, see “Setting the speaker impedance” (p.18) in “Owner’s Manual”. 1 Connect the front speakers ( • Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers.
PAGE 4
3 Connect the surround back speakers ( ( AUDIO 3 / ) to the SURROUND BACK ) terminals. / AUDIO 4 4 Connect the front presence speakers MULTI CH INPUT ZONE OUT/PRE OUT CENTER PRE OUT (SINGLE) (FRONT) ( / terminals. AUDIO 3 AUDIO 4 MULTI CH INPUT 1 ) to the EXTRA SP1 ( ZONE OUT/PRE OUT CENTER PRE OUT (SINGLE) (FRONT) 2 This unit (rear) FRONT SURROUND SUR. BACK SUBWOOFER ZONE 2/ ZONE 3/ F.PRESENCE R.PRESENCE FRONT SURROUND SUR.
PAGE 5
Before connecting the power cable (General model only) Make sure you set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110-120/220-240 V, 50/60 Hz. 4 Connecting the external devices TV Audio out (digital optical or analog stereo) HDMI in 1 Connect the external devices to this unit. HDMI out HDMI OPTICAL R a Connect the BD/DVD player and this unit with an HDMI cable.
PAGE 6
5 Optimizing the speaker settings automatically (YPAO) By using the Yamaha Parametric room Acoustic Optimizer (YPAO) function, this unit automatically detects speaker connections and distances from the listening position, and optimizes the speaker settings such as volume balance and acoustic parameters to suit your room. • During the measuring process, the test tones are output at high volume. Take care that the test tone does not frighten small children.
PAGE 7
the cursor keys to select 3 Use “Save/Cancel” and press ENTER. If “W-1: Out of Phase” appears Follow the procedure below to check the speaker connections. Depending on the type of speakers or room environment, this message may appear even if the speakers are connected correctly. the cursor keys to select “SAVE” and 4 Use press ENTER. a Use the cursor keys to select “Result” and press ENTER. b Use the cursor keys to select “Wiring”.
PAGE 8
6 Playing back a BD/DVD Now let’s play back a BD/DVD. We recommend playing back multichannel audio (5.1-channel or more) to feel surround sound produced by this unit. SOURCE RECEIVER Much more features! 1 Press AV1 to select “AV1” as the input source. SP IMP. - DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 ENHANCER SLEEP HD 3 AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 PHONO MULTI USB NET DOCK TUNER [A] [B] AV1 AUDIO SP IMP.