Owner's Manual
Table Of Contents
- Easy Setup Guide
- Owners Manual
- Initialize (Menu Item)
- Features
- Automatic Speaker Setup
- Supplied Accessories
- Parts & Controls
- Connections & Setup
- Playback
- Basic Playback
- Selecting the Input Source and Favorite Settings with One Touch
- Selecting the Sound Mode
- Listening to FM / AM Radio
- Playing back iPod
- Playing back Music Stored on a USB Device
- Playing back Music Stored on Media Servers
- Listening to Internet Radio
- Playing back iTunes / iPod Music via a Network
- Playing back Videos / Audio in Multiple Rooms
- Viewing the Current Status
- Configuring Playback Settings for Different Playback Sources
- Configurations
- Configuring Input Sources
- Configuring the SCENE Function
- Configuring Sound Programs / Surround Decoders
- Configuring Various Functions
- Viewing Information About the Unit
- Advanced Setup Menu
- List of Menu Items
- Changing the Speaker Impedance
- Turning On / Off the Remote Control Sensor
- Selecting the Remote Control ID
- Switching the Video Signal Type
- Removing the Limitation on HDMI Video Output
- Backing Up / Recovering the Settings
- Restoring the Default Settings
- Updating the Firmware
- Checking the Firmware Version
- Controlling External Devices with the Remote Control
- Updating the Firmware
- Controlling the Unit from a Web Browser
- Remote Control Codes
- Information on HDMI
- FAQs
- Troubleshooting
- Error Displays
- Glossary
- Specs
- Index
- Supplement for Web Control
- List of Remote Control Codes
- Multi-Zone Functions
- Controlling Your TV with the Remote Control
- Scan of CD-ROM
- Warranty
CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu) En 106
5
Use the cursor keys and ENTER to change the setting.
6
To exit from the menu, press ON SCREEN.
Scene menu items
■ Save
Registers the unit’s current settings (such as input source and sound program) in the
selected scene.
• If you have changed the input assignment for a scene, you also need to change the external device
assigned to the corresponding SCENE key (p.62).
■ Load
Loads the settings registered for the selected scene.
Select “DETAIL” to configure the SCENE link playback setting or view the scene
assignments.
❑ Device Control
Recalls a selected scene and starts its playback on an external device connected to
the unit via HDMI or on a Yamaha product connected to the REMOTE OUT jack.
(SCENE link playback)
Settings
Default
SCENE1 (BD/DVD), SCENE2 (TV): HDMI Control
SCENE3 (NET), SCENE4 (RADIO), SCENE5–12: Off
• To control playback of an HDMI Control-compatible device by SCENE link playback, you need to set “HDMI
Control” in the “Setup” menu to “On” and perform the HDMI Control link setup (p.158).
Item Function Page
Save Registers the current settings in the selected scene. 106
Load
Loads the settings registered for the selected scene. You can
also configure the SCENE link playback setting, select items
to be included as the scene assignments, or view the settings
currently assigned to the selected scene.
106
Rename/Icon Select Changes the scene name and icon. 107
Reset Restores the default settings for the selected scene. 107
Off Disables the SCENE link playback function.
HDMI Control
Enables SCENE link playback using HDMI Control signals. Select this
if an HDMI Control-compatible device (such as a BD/DVD player) is
connected to the unit via HDMI. It also turns on the TV if it supports
HDMI Control.
IR: Yamaha BD/DVD 1
Enables SCENE link playback using remote control signals. Select this
if a Yamaha BD/DVD player is connected to the REMOTE OUT jack.
IR: Yamaha BD/DVD 2
Enables SCENE link playback using remote control signals. Select this
if a Yamaha BD/DVD player is connected to the REMOTE OUT jack
and “IR: Yamaha BD/DVD 1” does not work properly.
IR: Yamaha CD
Enables SCENE link playback using remote control signals. Select this
if a Yamaha CD player is connected to the REMOTE OUT jack.