Owner's Manual
Table Of Contents
- Easy Setup Guide
- Owners Manual
- Initialize (Menu Item)
- Features
- Automatic Speaker Setup
- Supplied Accessories
- Parts & Controls
- Connections & Setup
- Playback
- Basic Playback
- Selecting the Input Source and Favorite Settings with One Touch
- Selecting the Sound Mode
- Listening to FM / AM Radio
- Playing back iPod
- Playing back Music Stored on a USB Device
- Playing back Music Stored on Media Servers
- Listening to Internet Radio
- Playing back iTunes / iPod Music via a Network
- Playing back Videos / Audio in Multiple Rooms
- Viewing the Current Status
- Configuring Playback Settings for Different Playback Sources
- Configurations
- Configuring Input Sources
- Configuring the SCENE Function
- Configuring Sound Programs / Surround Decoders
- Configuring Various Functions
- Viewing Information About the Unit
- Advanced Setup Menu
- List of Menu Items
- Changing the Speaker Impedance
- Turning On / Off the Remote Control Sensor
- Selecting the Remote Control ID
- Switching the Video Signal Type
- Removing the Limitation on HDMI Video Output
- Backing Up / Recovering the Settings
- Restoring the Default Settings
- Updating the Firmware
- Checking the Firmware Version
- Controlling External Devices with the Remote Control
- Updating the Firmware
- Controlling the Unit from a Web Browser
- Remote Control Codes
- Information on HDMI
- FAQs
- Troubleshooting
- Error Displays
- Glossary
- Specs
- Index
- Supplement for Web Control
- List of Remote Control Codes
- Multi-Zone Functions
- Controlling Your TV with the Remote Control
- Scan of CD-ROM
- Warranty
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 118
Sound
Configures the audio output settings.
■ Lipsync
Adjusts the delay between video and audio output.
❑ Delay Enable
Enables/disables the Lipsync adjustment for each input source.
Choices
AV 1–7, AUDIO 1–4
Settings
❑ Auto/Manual Select
Selects the method to adjust the delay between video and audio output.
Setting range
• Even if “Auto/Manual Select” is set to “Auto”, the automatic adjustment does not work depending on the TV
connected to the unit. In this case, adjust the delay manually in “Adjustment”.
❑ Adjustment
Adjusts the delay between video and audio output manually when “Auto/Manual
Select” is set to “Manual”. You can fine-adjust the audio output timing when
“Auto/Manual Select” is set to “Auto”.
Setting range
0 ms to 500 ms (1 ms increments)
Default
0 ms
• When “Auto/Manual Select” is set to “Auto”, “Offset” shows the difference between automatic adjustment
and fine adjustment.
■ Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Settings
■ Max Volume
Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
Disable Disable the Lipsync adjustment for the selected input source.
Enable (default) Enables the Lipsync adjustment for the selected input source.
Auto (default)
Adjusts the delay between video and audio output automatically when
a TV that supports an automatic lipsync function is connected to the
unit via HDMI.
If necessary, you can fine-adjust the audio output timing in
“Adjustment”.
Manual
Select this option when you want to adjust the delay between video
and audio output manually.
Adjust the audio output timing in “Adjustment”.
Maximum (default) Produces audio without adjusting the dynamic range.
Standard Optimizes the dynamic range for regular home use.
Minimum/Auto
Sets the dynamic range for clear sound even at night or at low
volumes.
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.