Owner's Manual
Table Of Contents
- Easy Setup Guide
- Owners Manual
- Initialize (Menu Item)
- Features
- Automatic Speaker Setup
- Supplied Accessories
- Parts & Controls
- Connections & Setup
- Playback
- Basic Playback
- Selecting the Input Source and Favorite Settings with One Touch
- Selecting the Sound Mode
- Listening to FM / AM Radio
- Playing back iPod
- Playing back Music Stored on a USB Device
- Playing back Music Stored on Media Servers
- Listening to Internet Radio
- Playing back iTunes / iPod Music via a Network
- Playing back Videos / Audio in Multiple Rooms
- Viewing the Current Status
- Configuring Playback Settings for Different Playback Sources
- Configurations
- Configuring Input Sources
- Configuring the SCENE Function
- Configuring Sound Programs / Surround Decoders
- Configuring Various Functions
- Viewing Information About the Unit
- Advanced Setup Menu
- List of Menu Items
- Changing the Speaker Impedance
- Turning On / Off the Remote Control Sensor
- Selecting the Remote Control ID
- Switching the Video Signal Type
- Removing the Limitation on HDMI Video Output
- Backing Up / Recovering the Settings
- Restoring the Default Settings
- Updating the Firmware
- Checking the Firmware Version
- Controlling External Devices with the Remote Control
- Updating the Firmware
- Controlling the Unit from a Web Browser
- Remote Control Codes
- Information on HDMI
- FAQs
- Troubleshooting
- Error Displays
- Glossary
- Specs
- Index
- Supplement for Web Control
- List of Remote Control Codes
- Multi-Zone Functions
- Controlling Your TV with the Remote Control
- Scan of CD-ROM
- Warranty
En 1
Supplement for Web Control
You can control the unit with the web control screen displayed in a web browser.
• To use this function, the unit and your PC must be connected to the network properly.
• Some security software installed on your PC may block the access of the unit to your PC. In these
cases, configure the security software appropriately.
• To display the web control screen or turn on the unit from the web control when the unit is in standby
mode, set “Network Standby” (p.3) to “On”.
• We recommend using one of the following web browsers.
– Internet Explorer 7.x, 8.x or 9.x
– Safari 5.x
1
Start the web browser.
2
Enter the IP address of the unit in the address bar of the web
browser.
(Example)
• You can check the IP address of the unit in “Network” in the “Information” menu.
• You can bookmark the unit’s IP address in the browser or create a shortcut link (p.3) to access the
web control screen quickly in the future.
Controlling the unit from a web browser (web control)
Web browser
Web control
PC
Router The unit
Web control
Note
• If you are using a DHCP server, the IP address of the unit may change each time the unit is turned on.
• If you have enabled the MAC address filter, you need to specify the MAC address of your PC to allow
the PC to access the unit. For information on how to check the MAC address of your PC, refer to its
instruction manual.
• Items available on the web control screen vary depending on the model.