Owner's Manual

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 113
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Automatically optimizes the speaker settings (YPAO). 50
Manual Setup
Setting Pattern Registers two speaker setting patterns and switches between them. 116
Setting Data Copy Copies the “Setting Pattern” parameters in the specified direction. 116
Power Amp Assign Selects a speaker system. 116
Configuration
Front Selects the size of the front speakers. 117
Center Selects whether or not a center speaker is connected and its size. 117
Surround Selects whether or not surround speakers are connected and their size. 117
Surround Back Selects whether or not surround back speakers are connected and their size. 117
Front Presence Selects whether or not front presence speakers are connected. 118
Rear Presence Selects whether or not rear presence speakers are connected. 118
Subwoofer 1
Subwoofer 2
Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or SUBWOOFER 2 jack and its phase. 118
SWFR Layout Selects a subwoofer layout when 2 subwoofers are used. 118
Extra Bass Sets the speakers to produce the front channel low-frequency components. 118
Distance Sets the distance between each speaker and listening position. 118
Level Adjusts the volume of each speaker. 119
Parametric EQ Adjusts the tone with an equalizer. 119
Test Tone Enables/disables the test tone output. 119
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 120
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 120
Adjustment Adjusts the delay between video and audio output manually. 120
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 120
Max Volume Sets the maximum volume to prevent excessive loudness. 120
Initial Volume Sets the initial volume for when this receiver is turned on. 121
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 121
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level. 121
VPS
(RX-A3030 only)
Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers. 121