Owner's Manual

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 114
Video
Analog to Analog Conversion Enables/disables the video conversion between the analog video jacks 122
Video Mode Enables/disables the video signal processing (resolution, aspect ratio and video adjustments). 122
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 124
Audio Output Selects a device to output audio. 124
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 125
Network
IP Address Configures the network parameters (such as IP address). 125
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 126
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 126
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 126
Multi Zone
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the front display or TV screen. 127
Zone2 Set
Zone3 Set
Vol ume Enables/disables volume adjustments for Zone2 or Zone3 output. 127
Max Volume Sets the Zone2 or Zone3 maximum volume to prevent excessive loudness in the second zone. 127
Initial Volume Sets the Zone2 or Zone3 initial volume for when the unit is turned on. 127
Mono Switches between stereo and monaural for Zone2 or Zone3 output. 128
Zone Scene Rename Changes the scene names (for Zone2 or Zone3) displayed on the front display or TV screen. 128
Zone Rename Changes the zone name (for Zone2 or Zone3) displayed on the front display or TV screen. 128
Zone4 Set
Zone Scene Rename Changes the scene names (for Zone4) displayed on the front display or TV screen. 128
Zone Rename Changes the zone name (for Zone4) displayed on the front display or TV screen. 128
Monitor Out Assign Select the zone for which the MONITOR OUT/ZONE OUT jacks are used. 128
HDMI OUT2 Assign Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used. 129
Party Mode Set Enables/disables switching to the party mode for each zone. 129
Function
Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source. 129
Display Set
Dimmer (Front Display) Adjusts the brightness of the front display. 130
Short Message Selects whether to display short messages on the TV screen when the unit is operated. 130
Wallpaper Selects the image to be used as wallpaper on the TV. 130
Trigger Output1
Trigger Output2
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 130
Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. 131
DC OUT Power Mode Selects how to supply power through the DC OUT jack. 131
Memory Guard Prevents accidental changes to the settings. 131
Menu Item Function Page