Owner's Manual

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 127
Front Presence
Selects a front presence layout when front presence speakers are used. This
setting facilitates the optimization of the sound field effect.
Settings
• This setting is not available when “Configuration (Front Presence)” is set to “None”.
Rear Presence
Selects a rear presence layout when rear presence speakers are used. This
setting facilitates the optimization of the sound field effect.
Settings
• This setting is not available when “Configuration (Surround/Front Presence/Rear Presence)” is set to
“None”.
Subwoofer
Selects a subwoofer layout when 2 subwoofers are used.
Settings
• This setting is not available when “Subwoofer 1” or “Subwoofer 2” is set to “None”.
■ Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from “Meter” or “Feet”.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1,
Subwoofer 2
Setting range
0.30 m to 3.00 m
to 24.00 m (1.0 ft to 10.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments
■ Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1,
Subwoofer 2
Setting range
-10.0 dB to 0.0 dB
to +10.0 dB (0.5 dB increments)
■ Parametric EQ
Adjusts the tone with an equalizer.
Settings
• “YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the measurement results of “Auto
Setup” have already been saved (p.47). Press ENTER again to view the measurement results.
Front Height
Select this option when front presence speakers are installed on the
front side wall.
Overhead
Select this option when front presence speakers are installed to the
ceiling.
Rear Height
Select this option when rear presence speakers are installed on the
rear side wall.
Overhead
Select this option when rear presence speakers are installed to the
ceiling.
Left + Right
Select this option when 2 subwoofers are placed on the left and right
sides of the room.
Front + Rear
Select this option when 2 subwoofers are placed on the front and rear
sides of the room.
Monaural x2
Select this option when 2 subwoofers are placed freely.
Manual
Select this option when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.
YPAO:Flat Adjusts individual speakers to achieve the same characteristics.
YPAO:Front
Adjusts individual speakers to achieve the same characteristics as
the front speakers.
YPAO:Natural Adjusts all speakers to achieve a natural sound.
Through Does not use the equalizer.