Owner's Manual

PREPARATIONS ➤ Connecting to a network device wirelessly En 65
Connecting a mobile device to the unit
directly (Wireless Direct)
Follow the procedure below to connect a mobile device to the unit
directly.
• Wireless Direct connection may be insecure since the communication is not
strongly encrypted. The unit may operate by playback operation on wireless
devices connected to the unit without permission.
1
Press RECEIVER z to turn on the unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
• Operations with TV screen are available only when your TV is connected to
the unit via HDMI.
3
Press ON SCREEN.
4
Use the cursor keys to select “Setup” and press
ENTER.
5
Use the cursor keys (e/r) to select “Network”.
6
Use the cursor keys (q/w) to select “Network
Connection” and press ENTER.
7
Use the cursor keys (q/w) and ENTER to check
“Wireless Direct” and select “OK”.
• The checkmark indicates the current setting.
8
Use the cursor keys (q/w) and ENTER to check the
desired security method and select “NEXT”.
Settings
None, WEP
• If you select “None”, the connection may be insecure since the
communication is not encrypted.
ON SCREEN
ENTER
RECEIVER z
1 2 3 4 5 6 7 8 9 10
Cursor keys