Operation Manual
Table Of Contents
- Introduction
- FEATURES
- PREPARATIONS
- General setup procedure
- Connecting speakers
- Connecting a TV and playback devices
- Connecting the FM/AM antennas
- Connecting a network cable or preparing the wireless antenna
- Connecting other devices
- Connecting the power cable
- Selecting an on-screen menu language
- Configuring the necessary speaker settings
- Optimizing the speaker settings automatically (YPAO)
- Connecting to a network device wirelessly
- Connecting to the MusicCast network
- PLAYBACK
- Basic playback procedure
- Selecting the input source and favorite settings with one touch (SCENE)
- Selecting the sound mode
- Listening to FM/AM radio
- Playing back music via Bluetooth
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Playing back iTunes/iPod music with AirPlay
- Playing back videos/audio in multiple rooms (multi-zone)
- Registering favorite items (shortcut)
- Controlling the unit from a web browser (web control)
- Viewing the current status
- Configuring playback settings for different playback sources (Option menu)
- CONFIGURATIONS
- Configuring input sources (Input menu)
- Configuring the SCENE function (Scene menu)
- Configuring sound programs/surround decoders (DSP Program menu)
- Configuring various functions (Setup menu)
- Viewing information about the unit (Information menu)
- Configuring the system settings (ADVANCED SETUP menu)
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SPEAKER IMP.)
- Turning on/off the remote control sensor (REMOTE SENSOR)
- Selecting the remote control ID (REMOTE CON AMP)
- Changing the FM/AM tuning frequency setting (TUNER FRQ STEP)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MONITOR CHECK)
- Selecting the HDMI 4K signal format (4K MODE)
- Backing up/recovering the settings (RECOV./BACKUP)
- Restoring the default settings (INITIALIZE)
- Updating the firmware (FIRM UPDATE)
- Checking the firmware version (VERSION)
- Controlling external devices with the remote control
- Updating the unit’s firmware via the network
- APPENDIX
- List of remote control codes
En 109
⬛ Other operations for Zone2, Zone3 or
Zone4
The following functions are also available when the zone you want to
operate is enabled.
Adjusting the volume (for Zone2 and Zone3 only)
Press VOLUME or MUTE.
Selecting the input source and settings at once (SCENE)
Press SCENE.
X
To register the current settings (input source, volume and tone control) to a scene, hold
down the desired SCENE key until “SET Complete” appears on the front display. (Only
an input source can be registered for Zone4.)
Setting the sleep timer
Press SLEEP repeatedly to set the time (120 min, 90 min, 60 min, 30 min,
off).
Adjusting the high-/low-frequency range of sounds (for Zone2 and
Zone3 only)
1
Press ZONE CONTROL on the front panel to select the zone to be
operated.
2
Press TONE/BALANCE repeatedly to select “Treble” or “Bass”.
3
Press PROGRAM to make an adjustment.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
Default
0.0 dB
Adjusting the front speaker balance (for Zone2 and Zone3 only)
1
Press ZONE CONTROL on the front panel to select the zone to be
operated.
2
Press TONE/BALANCE repeatedly to select “Balance”.
3
Press PROGRAM to make an adjustment.
⬛ Enjoying the same source in multiple
rooms (party mode)
The party mode allows you to play back in all zones the same music that
is being played back in the main zone. During the party mode, stereo
playback is automatically selected for all zones. Utilize this function
when you want to use main zone music as background music for a house
party.
1
Press PARTY.
Each time you press the key, the party mode is turned on or off.
When the party mode is turned on, “PARTY” lights up in the front
display.
X
You can select the zones to be included in the party mode in “Party Mode Set” (p.147)
in the “Setup” menu.
Y
Zone4 output is available only when an HDMI input is selected in the main zone.
ENTER
RETURN
POP-UP/MENU
TOP MENU
INPUT
MUTE
TV VOL TV CH
TV
321
AUDIO
2 431
6
V-AUX
75
AV
BLUETOOTH
NET
PHONO
USB
TUNER
4321
8765
9 0
MAIN
ZONE
234
41 2 3
SCENE
MUTE
OPTION
ON
SCREEN
DISPLAY
MODE
MOVIE MUSIC
INFO SLEEP
ENT
PRESETTUNING
VOLUME
PROGRAM
HDMI OUTPARTY
BAND
SUR. DECODE
STRAIGHT
ENHANCER PURE DIRECT
10
MEMORY
CODE SET
RECEIVER
SOURCE
ENTE
R
RETURN
P
O
P-
U
P
/
MEN
U
TO
P MEN
U
I
NP
UT
MUTE
T
V
V
O
L
T
V
C
H
TV
3
2
1
AUDI
O
2
4
3
1
6
V
-
AUX
7
5
AV
BLUET
OO
TH
NET
PH
O
N
O
USB
TUNER
4
3
2
1
8
7
6
5
9
0
MAIN
Z
O
NE
2
3
4
O
PTI
ON
O
N
SC
REE
N
DI
S
PLA
Y
M
O
D
E
M
O
VI
E
MUS
I
C
INF
O
ENT
P
RE
S
ET
TU
NIN
G
PR
OG
RAM
HDMI
O
U
T
BAND
SU
R. DE
CO
D
E
S
TRAI
G
H
T
ENHAN
C
ER P
U
RE DIRE
C
T
10
MEM
O
RY
CO
DE
S
ET
RECEIVE
R
SOURCE
SLEEP
VOLUME
MUTE
SCENE
PARTY