Operation Manual
Table Of Contents
- Introduction
- FEATURES
- PREPARATIONS
- General setup procedure
- Connecting speakers
- Connecting a TV and playback devices
- Connecting the FM/AM antennas
- Connecting a network cable or preparing the wireless antenna
- Connecting other devices
- Connecting the power cable
- Selecting an on-screen menu language
- Configuring the necessary speaker settings
- Optimizing the speaker settings automatically (YPAO)
- Connecting to a network device wirelessly
- Connecting to the MusicCast network
- PLAYBACK
- Basic playback procedure
- Selecting the input source and favorite settings with one touch (SCENE)
- Selecting the sound mode
- Listening to FM/AM radio
- Playing back music via Bluetooth
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Playing back iTunes/iPod music with AirPlay
- Playing back videos/audio in multiple rooms (multi-zone)
- Registering favorite items (shortcut)
- Controlling the unit from a web browser (web control)
- Viewing the current status
- Configuring playback settings for different playback sources (Option menu)
- CONFIGURATIONS
- Configuring input sources (Input menu)
- Configuring the SCENE function (Scene menu)
- Configuring sound programs/surround decoders (DSP Program menu)
- Configuring various functions (Setup menu)
- Viewing information about the unit (Information menu)
- Configuring the system settings (ADVANCED SETUP menu)
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SPEAKER IMP.)
- Turning on/off the remote control sensor (REMOTE SENSOR)
- Selecting the remote control ID (REMOTE CON AMP)
- Changing the FM/AM tuning frequency setting (TUNER FRQ STEP)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MONITOR CHECK)
- Selecting the HDMI 4K signal format (4K MODE)
- Backing up/recovering the settings (RECOV./BACKUP)
- Restoring the default settings (INITIALIZE)
- Updating the firmware (FIRM UPDATE)
- Checking the firmware version (VERSION)
- Controlling external devices with the remote control
- Updating the unit’s firmware via the network
- APPENDIX
- List of remote control codes
En 118
⬛ Enhancer (Enhancer)
Enables/disables Compressed Music Enhancer and the high-resolution mode.
Enhancer (Enhancer)
Enables/disables Compressed Music Enhancer (p.82).
X
• This setting is applied separately to each input source.
• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer (p.82).
Settings
Default
TUNER, Bluetooth, USB, (network sources): On (On)
Others: Off (Off)
Y
Compressed Music Enhancer does not work on signals whose sampling rate is over 48 kHz.
Hi-Res Mode (HiRes Mode)
Enables/disables the high-resolution mode when “Enhancer” is set to “On”. If this function is
set to “On”, you can enhance the quality of uncompressed digital audio (such as 2-channel
PCM and FLAC) using Compressed Music Enhancer.
Settings
⬛ Video Processing (Video Process.)
Configures the video signal processing settings.
Video Mode (V.M)
Enables/disables the video signal processing (resolution, aspect ratio and video adjustments)
settings configured in “Processing” (p.139) in the “Setup” menu.
Settings
Video Adjustment (Video Adjust)
Selects a video adjustment setting from presets you have configured in “Adjustment” (p.137)
in the “Setup” menu.
X
This setting is applied separately to each input source.
Settings
1 to 6
Off (Off) Disables Compressed Music Enhancer.
On (On) Enables Compressed Music Enhancer.
On
(On)
Enables the high-resolution mode.
(The high-resolution mode may not work depending on the audio signal
processing condition.)
Off (Off) Disables the high-resolution mode.
Direct (Direct) Disables the video signal processing.
Processing
(Processing)
Enables the video signal processing.