Operation Manual
Table Of Contents
- Introduction
- FEATURES
- PREPARATIONS
- General setup procedure
- Connecting speakers
- Connecting a TV and playback devices
- Connecting the FM/AM antennas
- Connecting a network cable or preparing the wireless antenna
- Connecting other devices
- Connecting the power cable
- Selecting an on-screen menu language
- Configuring the necessary speaker settings
- Optimizing the speaker settings automatically (YPAO)
- Connecting to a network device wirelessly
- Connecting to the MusicCast network
- PLAYBACK
- Basic playback procedure
- Selecting the input source and favorite settings with one touch (SCENE)
- Selecting the sound mode
- Listening to FM/AM radio
- Playing back music via Bluetooth
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Playing back iTunes/iPod music with AirPlay
- Playing back videos/audio in multiple rooms (multi-zone)
- Registering favorite items (shortcut)
- Controlling the unit from a web browser (web control)
- Viewing the current status
- Configuring playback settings for different playback sources (Option menu)
- CONFIGURATIONS
- Configuring input sources (Input menu)
- Configuring the SCENE function (Scene menu)
- Configuring sound programs/surround decoders (DSP Program menu)
- Configuring various functions (Setup menu)
- Viewing information about the unit (Information menu)
- Configuring the system settings (ADVANCED SETUP menu)
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SPEAKER IMP.)
- Turning on/off the remote control sensor (REMOTE SENSOR)
- Selecting the remote control ID (REMOTE CON AMP)
- Changing the FM/AM tuning frequency setting (TUNER FRQ STEP)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MONITOR CHECK)
- Selecting the HDMI 4K signal format (4K MODE)
- Backing up/recovering the settings (RECOV./BACKUP)
- Restoring the default settings (INITIALIZE)
- Updating the firmware (FIRM UPDATE)
- Checking the firmware version (VERSION)
- Controlling external devices with the remote control
- Updating the unit’s firmware via the network
- APPENDIX
- List of remote control codes
En 130
Multi Zone
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the front display or TV screen. 145
Zone2 Set
Zone3 Set
Volume Enables/disables volume adjustments for Zone2 or Zone3 output. 145
Max Volume Sets the Zone2 or Zone3 limit value of the volume. 145
Initial Volume Sets the Zone2 or Zone3 initial volume for when the unit is turned on. 145
Audio Delay Adjusts the audio output timing for Zone2 or Zone3. 146
Mono Switches between stereo and monaural for Zone2 or Zone3 output. 146
Enhancer Enables/disables Compressed Music Enhancer for Zone2 or Zone3 output. 146
Tone Control Adjusts the level of high-frequency range and low-frequency range for Zone2 or Zone3 output. 146
Extra Bass Enables/disables Extra Bass for Zone2 or Zone3 output. 146
Zone Rename Changes the zone name (for Zone2 or Zone3) displayed on the front display or TV screen. 146
Zone4 Set Zone Rename Changes the zone name (for Zone4) displayed on the front display or TV screen. 146
Monitor Out Assign Select the zone for which the MONITOR OUT/ZONE OUT jacks are used. 146
HDMI OUT2 Assign Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used. 147
Party Mode Set Enables/disables switching to the party mode for each zone. 147
Function
Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source. 147
Display Set
Dimmer (Front Display) Adjusts the brightness of the front display. 148
Short Message Selects whether to display short messages on the TV screen when the unit is operated. 148
Wallpaper Selects the image to be used as wallpaper on the TV. 148
Trigger Output1
Trigger Output2
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 148
Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. 149
Memory Guard Prevents accidental changes to the settings. 149
ECO
Auto Power Standby Sets the amount of time for the auto-standby function. 150
ECO Mode Enables/disables the eco mode (power saving mode). 150
Language Select an on-screen menu language. 150
Menu Item Function Page