Operation Manual
Table Of Contents
- Introduction
- FEATURES
- PREPARATIONS
- General setup procedure
- Connecting speakers
- Connecting a TV and playback devices
- Connecting the FM/AM antennas
- Connecting a network cable or preparing the wireless antenna
- Connecting other devices
- Connecting the power cable
- Selecting an on-screen menu language
- Configuring the necessary speaker settings
- Optimizing the speaker settings automatically (YPAO)
- Connecting to a network device wirelessly
- Connecting to the MusicCast network
- PLAYBACK
- Basic playback procedure
- Selecting the input source and favorite settings with one touch (SCENE)
- Selecting the sound mode
- Listening to FM/AM radio
- Playing back music via Bluetooth
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Playing back iTunes/iPod music with AirPlay
- Playing back videos/audio in multiple rooms (multi-zone)
- Registering favorite items (shortcut)
- Controlling the unit from a web browser (web control)
- Viewing the current status
- Configuring playback settings for different playback sources (Option menu)
- CONFIGURATIONS
- Configuring input sources (Input menu)
- Configuring the SCENE function (Scene menu)
- Configuring sound programs/surround decoders (DSP Program menu)
- Configuring various functions (Setup menu)
- Viewing information about the unit (Information menu)
- Configuring the system settings (ADVANCED SETUP menu)
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SPEAKER IMP.)
- Turning on/off the remote control sensor (REMOTE SENSOR)
- Selecting the remote control ID (REMOTE CON AMP)
- Changing the FM/AM tuning frequency setting (TUNER FRQ STEP)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MONITOR CHECK)
- Selecting the HDMI 4K signal format (4K MODE)
- Backing up/recovering the settings (RECOV./BACKUP)
- Restoring the default settings (INITIALIZE)
- Updating the firmware (FIRM UPDATE)
- Checking the firmware version (VERSION)
- Controlling external devices with the remote control
- Updating the unit’s firmware via the network
- APPENDIX
- List of remote control codes
En 131
Speaker (Manual Setup)
Configures the speaker settings manually.
X
Default settings are underlined.
⬛ Setting Pattern
Registers two speaker setting patterns and switches between them.
When you configure the following speaker settings, the settings will be memorized in the
selected pattern.
• Measurement results (Auto Setup)
• Power Amp Assign
• Configuration
• Distance
• Level
•Parametric EQ
Settings
Pattern1
, Pattern2
X
• The setting pattern currently selected is shown at the top of the “Manual Setup” screen.
• This function is useful when you want to save certain settings according to the varying conditions of your
listening environment. For example, if you want to switch the settings when curtains are open or closed, you
can save the settings suited for each condition and switch between them.
⬛ Setting Data Copy
Copies the “Setting Pattern” parameters in the specified direction.
Choices
⬛ Power Amp Assign
Selects a speaker system.
The unit has 9 built-in amplifiers. You can connect 2 to 11 speakers and up to 2 subwoofers
(with built-in amplifier) to create the favorite acoustic space in your room. You can also apply
bi-amp connections, channel expansion (using an external power amplifier) or multi-zone
configurations to enhance your system.
Settings
Pattern1 > 2 Copies the “Pattern1” parameters to “Pattern2”.
Pattern2 > 1 Copies the “Pattern2” parameters to “Pattern1”.
Basic
Select this option when you use the basic speaker configuration (up to 9-channel
plus rear presence speakers) (p.21).
7.2 +1Zone
Select this option when you use Zone2 (or Zone3) speakers in addition to the 7.2
system in the main zone (p.32).
You can select a zone to be assigned to the EXTRA SP 1 jacks (default: Zone2).
7.2.2 +1Zone
Select this option when you use Zone2 (or Zone3) speakers in addition to the
7.2.2 system in the main zone (p.32).
You can select a zone to be assigned to the EXTRA SP 2 jacks (default: Zone2).
7.2 +2Zone
Select this option when you use Zone2 and Zone3 speakers in addition to the 7.2
system in the main zone (p.32).
You can select a zone to be assigned to the EXTRA SP 1 and EXTRA SP 2 jacks
(default: Zone2 for EXTRA SP 1, Zone3 for EXTRA SP 2).
7.2.4 [ext.RP]
(RX-A3060 only)
Select this option when you use the 7.2.4 system including rear presence channel
expansion using an external amplifier (p.33).
7.2.4 [ext.FRONT]
(RX-A3060 only)
Select this option when you use the 7.2.4 system including front channel
expansion using an external amplifier (p.34).
7.2.4 [ext.FP+RP]
(RX-A3060 only)
Select this option when you use the 7.2.4 system including front presence and
rear presence channel expansion using an external amplifier (p.34).
7.2.2 [ext.FRONT]
+1Zone
Select this option when you use Zone2 (or Zone3) speakers in addition to the
7.2.2 system (including front channel expansion using an external amplifier) in
the main zone (p.35).
You can select a zone to be assigned to the EXTRA SP 2 jacks (default: Zone2).