Operation Manual
Table Of Contents
- Introduction
- FEATURES
- PREPARATIONS
- General setup procedure
- Connecting speakers
- Connecting a TV and playback devices
- Connecting the FM/AM antennas
- Connecting a network cable or preparing the wireless antenna
- Connecting other devices
- Connecting the power cable
- Selecting an on-screen menu language
- Configuring the necessary speaker settings
- Optimizing the speaker settings automatically (YPAO)
- Connecting to a network device wirelessly
- Connecting to the MusicCast network
- PLAYBACK
- Basic playback procedure
- Selecting the input source and favorite settings with one touch (SCENE)
- Selecting the sound mode
- Listening to FM/AM radio
- Playing back music via Bluetooth
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Playing back iTunes/iPod music with AirPlay
- Playing back videos/audio in multiple rooms (multi-zone)
- Registering favorite items (shortcut)
- Controlling the unit from a web browser (web control)
- Viewing the current status
- Configuring playback settings for different playback sources (Option menu)
- CONFIGURATIONS
- Configuring input sources (Input menu)
- Configuring the SCENE function (Scene menu)
- Configuring sound programs/surround decoders (DSP Program menu)
- Configuring various functions (Setup menu)
- Viewing information about the unit (Information menu)
- Configuring the system settings (ADVANCED SETUP menu)
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SPEAKER IMP.)
- Turning on/off the remote control sensor (REMOTE SENSOR)
- Selecting the remote control ID (REMOTE CON AMP)
- Changing the FM/AM tuning frequency setting (TUNER FRQ STEP)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MONITOR CHECK)
- Selecting the HDMI 4K signal format (4K MODE)
- Backing up/recovering the settings (RECOV./BACKUP)
- Restoring the default settings (INITIALIZE)
- Updating the firmware (FIRM UPDATE)
- Checking the firmware version (VERSION)
- Controlling external devices with the remote control
- Updating the unit’s firmware via the network
- APPENDIX
- List of remote control codes
En 14
⬛ Inside of the front panel door
a ON SCREEN key
Displays the on-screen menu on the TV.
b Menu operations keys
Cursor keys: Select a menu or a parameter.
ENTER: Confirms a selected item.
RETURN: Returns to the previous screen.
c OPTION key
Displays the option menu (p.115).
d DISPLAY key
Displays status information on the TV (p.114).
e TONE/BALANCE key
Adjusts the high-frequency range and low-frequency range of
output sounds (p.116).
Adjusts the left/right channel volume balance for Zone2 or Zone3
(p.109).
f STRAIGHT (CONNECT) key
Enables/disables the straight decode mode (p.81).
Enters MusicCast CONTROLLER registration by holding down for 5
seconds (p.73).
g PROGRAM keys
Select a sound program or a surround decoder (p.77).
h SCENE keys
Select the registered input source, sound program, and various
settings with one touch. Also, turns on the unit when it is in
standby mode (p.75).
i MULTI ZONE keys
ZONE 2-4: Enables/disables the audio output to each zone
(p.108).
ZONE CONTROL: Changes the zone that is controlled by the keys
and knobs on the front panel (p.108).
j INFO (WPS) key
Selects the information displayed on the front display (p.114).
Enters the wireless network connection setup (WPS push button
configuration) by holding down for 3 seconds (p.67).
k MEMORY key
Registers FM/AM radio stations as preset stations (p.84).
Registers USB/network contents as shortcuts (p.110).
l FM and AM keys
Switch between FM and AM (p.84).
m PRESET keys
Select a preset FM/AM radio station (p.85).
Selects a USB/network content from shortcuts (p.110).
n TUNING keys
Select the radio frequency (p.84).
o USB jack
For connecting a USB storage device (p.90).
p YPAO MIC jack
For connecting the supplied YPAO microphone (p.53).
q PHONES jack
For connecting headphones.
r VIDEO AUX jacks
For connecting a device, such as a camcorder and a game console
(p.47).
ENTER
OPTION
ON SCREEN
DISPLAYRETURN
YPAO MIC
PHONES
USB
SILENT CINEMA
TONE/BALANCE
STRAIGHT
PROGRAM
MULTI ZONE
VIDEO AUX
ZONE 2
ZONE 3
ZONE 4
ZONE CONTROL
VIDEO
5V
1A
SCENE
1234
RL AUDIO
HDMI IN
INFO
(
WPS
)
MEMORY
FM AM
TUNING
PRESET
(
CONNECT
)
dg lnacef jkmbhi
op q r