User Manual

En 119
Input Settings (Input Settings)
Configures the input settings.
X
This setting is applied separately to each input source.
Input Trim (In.Trim)
Corrects volume differences between input sources. If you are bothered by volume differences
when switching between input sources, use this function to correct it.
Setting range
-6.0 dB to 0.0
dB to +6.0 dB (0.5 dB increments)
Audio Select (A.Sel)
Selects the audio input jack to use when more than one audio connection is made for one input
source.
Settings
Video Out (V.Out)
Selects a video to be output with the audio input source.
Settings
FM Mode (FM Mode)
Switches between stereo and monaural for FM radio reception.
Settings
Auto
(Auto)
Automatically selects the audio input jack in the following priority order.
1. HDMI input
2. Digital input (COAXIAL or OPTICAL)
3. Analog input (AUDIO)
HDMI (HDMI)
Always selects HDMI input. No sounds are produced when no signals are input
through the HDMI jack.
Coax/Opt (Coax/Opt)
Always selects digital input (COAXIAL or OPTICAL). No sounds are produced when
no signals are input through the COAXIAL or OPTICAL jack.
Analog (Analog)
Always selects analog input (AUDIO). No sounds are produced when no signals
are input through the AUDIO jacks.
Off
(Off) Does not output video.
AV 1-7 (AV1-7), V-AUX
(V-AUX)
Outputs video input through the corresponding video input jacks.
Stereo (Stereo) Receives FM radio in stereo sounds.
Mono (Mono) Receives FM radio in monaural sounds.