User Manual

En 178
Multi-zone output
Video/audio signals that can be output to Zone2, Zone3 and Zone4 vary depending on how you connect the device in each zone to the unit's output jacks.
Audio output
m: Available
*1 Available when “HDMI OUT2 Assign” (p.147) in the “Setup” menu is set to “Zone2” (Audio
Output: On)
*2 Available when “HDMI OUT2 Assign” (p.147) in the “Setup” menu is set to “Zone4”
*3 Available when 2-channel PCM signals are input (stereo output [down mixed to 2-channels]
when the input source selected in the main zone is selected)
Available when “HDMI OUT2 Assign” (p.147) in the “Setup” menu is set to “Zone2”
*4 Available when 2-channel PCM signals are input (stereo output [down mixed to 2-channels]
when the input source selected in the main zone is selected)
*5 HDMI audio pass-through (stereo output [down mixed to 2-channels] when the input source
selected in the main zone is selected)
*6 Available when 2-channel PCM signals are input
*7 To play back DSD audio in Zone2/Zone3, select “Main Zone Sync” as the Zone2/Zone3 input
with the web control (p.111) or use the party mode (p.109).
Video output
m: Available
*8 Available when “Monitor Out Assign” (p.146) in the “Setup” menu is set to “Zone2” or
“Zone3”
*9 Available when “HDMI OUT2 Assign” (p.147) in the “Setup” menu is set to “Zone2” or
“Zone4”
Using the unit’s internal
amplifier (p.39)
Using an external amplifier (p.105)
In \ Out
EXTRA SP 1-2 jacks ZONE OUT jacks
HDMI OUT 2
(ZONE OUT) jack
Zone2 Zone3 Zone2 Zone3 Zone2 (*1) Zone4 (*2)
Digital audio (HDMI) m (*3) m (*3) m (*4) m (*5)
Digital audio
(COAXIAL/OPTICAL)
m (*6) m (*6) m (*6) m (*6) m (*6)
Analog audio (AUDIO) mmmmm
USB (*7) mmmmm
Network sources (*7) mmmmm
TUNER mmmmm
In \ Out
MONITOR OUT/ZONE OUT jacks (*8)
HDMI OUT 2 (ZONE OUT) jack (*9)
COMPONENT
VIDEO
VIDEO
Zone2/3 Zone2/3 Zone2 Zone4
HDMI video mm
Component video m
Composite video m
On-screen display
(browse/playback)
m