User Manual

En 31
⬛ Available speaker configurations
(RX-A3060) (RX-A2060)
Y
• When applying one of these configurations, you need to configure the “Power Amp Assign” setting in the
“Setup” menu (p.52).
• When applying a multi-zone configuration, you can select a zone (Zone2 or Zone3) to be assigned to the EXTRA
SP 1-2 jacks in “Power Amp Assign” (p.131) in the “Setup” menu. The following explanation is based on the
assumption that you have not changed the default zone assignments.
Main zone
Multi-zone
Power Amp Assign
(p.131)
Page
Output
channel
(max)
Bi-amp
External
speakers
External power
amplifier
(required)
7 Surround back +1 room 7.2 +1Zone 32
9
Surround back
Front presence
+1 room 7.2.2 +1Zone 32
7 Surround back +2 rooms 7.2 +2Zone 33
11
Surround back
Front presence
Rear presence 7.2.4 [ext.RP] 33
11
Surround back
Front presence
Rear presence
Front 7.2.4 [ext.Front] 34
11 Surround back
Front presence
Rear presence
7.2.4 [ext.FP+RP] 34
9
Surround back
Front presence
Front +1 room
7.2.2 [ext.Front]
+1Zone
35
7 Surround back Front +2 rooms
7.2 [ext.Front]
+2Zone
35
7 ⚪ Surround back 7.2 Bi-Amp 36
7 ⚪ Front presence 5.2.2 Bi-Amp 36
7 ⚪ Surround back +1 room 7.2 Bi-Amp +1Zone 37
11 ⚪ Surround back
Front presence
Rear presence
7.2.4 Bi-Amp
[ext.FP+RP]
37
9 ⚪ Front presence Rear presence
5.2.4 Bi-Amp
[ext.RP]
38
Main zone
Multi-zone
Power Amp Assign
(p.131)
Page
Output
channel
(max)
Bi-amp
External
speakers
External power
amplifier
(required)
7 Surround back +1 room 7.2 +1Zone 32
9
Surround back
Front presence
+1 room 7.2.2 +1Zone 35
7 Surround back +2 rooms 7.2 +2Zone 33
9
Surround back
Front presence
Front +1 room
7.2.2 [ext.Front]
+1Zone
35
7 Surround back Front +2 rooms
7.2 [ext.Front]
+2Zone
35
7 ⚪ Surround back 7.2 Bi-Amp 36
7 ⚪ Front presence 5.2.2 Bi-Amp 36
7 ⚪ Surround back +1 room 7.2 Bi-Amp +1Zone 37