Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Features
- Preparations
- General Setup Procedure
- Connecting Speakers
- Connecting a TV and Playback Devices
- Connecting the Radio Antennas
- Connecting a Network Cable or Preparing the Wireless Antenna
- Connecting Other Devices
- Connecting the Power Cable
- Selecting an On-Screen Menu Language
- Configuring the Necessary Speaker Settings
- Optimizing the Speaker Settings Automatically (YPAO)
- Connecting to a Network Device Wirelessly
- Connecting to the MusicCast Network
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- Playing Back Music via Bluetooth
- Playing Back Music Stored on a USB Storage Device
- Playing Back Music Stored on Media Servers (PCs / NAS)
- Listening to Internet Radio
- Playing Back iTunes / iPod Music with AirPlay
- Playing Back Videos / Audio in Multiple Rooms (Multi-Zone)
- Registering Favorite Items (Shortcut)
- Controlling the Unit from a Web Browser (Web Control)
- Viewing the Current Status
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Configurations
- Configuring Input Sources (Input Menu)
- Configuring the SCENE Function (Scene Menu)
- Configuring Sound Programs / Surround Decoders (DSP Program Menu)
- Configuring Various Functions (Setup Menu)
- Viewing Information About the Unit (Information Menu)
- Configuring the System Settings (ADVANCED SETUP Menu)
- ADVANCED SETUP Menu Items
- Changing the Speaker Impedance Setting (SPEAKER IMP.)
- Turning On / Off the Remote Control Sensor (REMOTE SENSOR)
- Selecting the Remote Control ID (REMOTE ID)
- Changing the FM / AM Tuning Frequency Setting (TUNER FRQ STEP)
- Switching the Video Signal Type (TV FORMAT)
- Removing the Limitation on HDMI Video Output (MONITOR CHECK)
- Selecting the HDMI 4K Signal Format (4K MODE)
- Switching the DTS Format Notification Setting (DTS MODE)
- Backing Up / Recovering the Settings (RECOV. / BACKUP)
- Restoring the Default Settings (INITIALIZE)
- Updating the Firmware (FIRM. UPDATE)
- Checking the Firmware Version (VERSION)
- Controlling External Devices with the Remote Control
- Updating the Unit’s Firmware via the Network
- Frequently Asked Questions
- Troubleshooting
- Error Indications on the Front Display
- Glossary
- Supported Devices and File Formats
- Video Signal Flow
- Multi-Zone Output
- Information on HDMI
- List of Remote Control Codes
- Specs
- Quick Start Guide
- Warranty
En 149
■ DAC Digital Filter
(RX-A3070 only)
Selects the digital filter type of the audio DAC (digital-to-analog converter) to have favorite
sounds.
Settings
■ Object Decode Mode
Enables/disables playback of object-based audio signals such as Dolby Atmos or DTS:X
contents.
Settings
X
If audio output is not available when Dolby Atmos or DTS:X signals are input, set “Object Decode Mode” to
“Enable”.
Video
Configures the video output settings.
■ Video Mode
Enables/disables the video signal processing (resolution, aspect ratio and video adjustments).
Settings
X
When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to reduce
video output delay.
Resolution
Selects a resolution to output HDMI video signals when “Video Mode” is set to “Processing”.
Settings
X
If you need to select a resolution that is not supported by your TV, set “MONITOR CHECK” (p.165) in the
“ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be displayed on your TV
normally.)
Sharp Roll-off Type
Removes out-of-band noises by the filter with steep attenuation characteristics.
It has a tendency to produce clear sounds.
Slow Roll-off Type
Removes out-of-band noises by the filter with gentle attenuation characteristics.
It has a tendency to produce soft sounds.
Short Latency Type
Reduces the audio delay caused by the DAC internal digital filter.
It has a tendency to produce responsive and rhythmical sounds.
Disable
Disables playback of object-based audio signals. Those signals will be played in
normal 5.1-/7.1-channel audio.
Enable
Enables playback of object-based audio signals.
Direct Disables the video signal processing.
Processing
Enables the video signal processing.
Configure the settings in “Resolution”, “Aspect” and “Adjustment”.
Through Does not convert the resolution.
Auto
Selects a resolution automatically in accordance with TV resolution.
480p/576p, 720p,
1080i, 1080p, 4K
Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)