Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Features
- Preparations
- General Setup Procedure
- Connecting Speakers
- Connecting a TV and Playback Devices
- Connecting the Radio Antennas
- Connecting a Network Cable or Preparing the Wireless Antenna
- Connecting Other Devices
- Connecting the Power Cable
- Selecting an On-Screen Menu Language
- Configuring the Necessary Speaker Settings
- Optimizing the Speaker Settings Automatically (YPAO)
- Connecting to a Network Device Wirelessly
- Connecting to the MusicCast Network
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- Playing Back Music via Bluetooth
- Playing Back Music Stored on a USB Storage Device
- Playing Back Music Stored on Media Servers (PCs / NAS)
- Listening to Internet Radio
- Playing Back iTunes / iPod Music with AirPlay
- Playing Back Videos / Audio in Multiple Rooms (Multi-Zone)
- Registering Favorite Items (Shortcut)
- Controlling the Unit from a Web Browser (Web Control)
- Viewing the Current Status
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Configurations
- Configuring Input Sources (Input Menu)
- Configuring the SCENE Function (Scene Menu)
- Configuring Sound Programs / Surround Decoders (DSP Program Menu)
- Configuring Various Functions (Setup Menu)
- Viewing Information About the Unit (Information Menu)
- Configuring the System Settings (ADVANCED SETUP Menu)
- ADVANCED SETUP Menu Items
- Changing the Speaker Impedance Setting (SPEAKER IMP.)
- Turning On / Off the Remote Control Sensor (REMOTE SENSOR)
- Selecting the Remote Control ID (REMOTE ID)
- Changing the FM / AM Tuning Frequency Setting (TUNER FRQ STEP)
- Switching the Video Signal Type (TV FORMAT)
- Removing the Limitation on HDMI Video Output (MONITOR CHECK)
- Selecting the HDMI 4K Signal Format (4K MODE)
- Switching the DTS Format Notification Setting (DTS MODE)
- Backing Up / Recovering the Settings (RECOV. / BACKUP)
- Restoring the Default Settings (INITIALIZE)
- Updating the Firmware (FIRM. UPDATE)
- Checking the Firmware Version (VERSION)
- Controlling External Devices with the Remote Control
- Updating the Unit’s Firmware via the Network
- Frequently Asked Questions
- Troubleshooting
- Error Indications on the Front Display
- Glossary
- Supported Devices and File Formats
- Video Signal Flow
- Multi-Zone Output
- Information on HDMI
- List of Remote Control Codes
- Specs
- Quick Start Guide
- Warranty
En 153
■ Manual network settings
1
Set “DHCP” to “Off”.
2
Use the cursor keys (q/w) to select a parameter type and press ENTER.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a
value.
4
To confirm the setting, press ENTER.
5
To configure another network parameter, repeat steps 2 to 4.
6
To save the changes, use the cursor keys to select “OK” and press ENTER.
7
To exit from the menu, press ON SCREEN.
■ Network Standby
Selects whether the unit can be turned on from other network devices (network standby).
Settings
With an advanced energy saving design, this product achieves a low power consumption of not
more than two watts when in Network Standby mode.
■ MAC Address Filter
Sets the MAC address filter to limit access to the unit from other network devices.
Filter
Enables/disables the MAC address filter.
Settings
X
AirPlay (p.110) and DMC (p.131) operations are not subject to the MAC address filter.
MAC Address 1-10
Specifies the MAC addresses (up to 10) of the network devices that will be permitted access to
the unit when “Filter” is set to “On”.
■ Procedure
1
Use the cursor keys (q/w) to select “MAC Address 1-5” or “MAC Address 6-10” and press
ENTER.
2
Use the cursor keys (q/w) to select an MAC address number and press ENTER.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a
value.
4
To confirm the setting, press ENTER.
5
To save the changes, use the cursor keys to select “OK” and press ENTER.
6
To exit from the menu, press ON SCREEN.
IP Address Specifies an IP address.
Subnet Mask Specifies a subnet mask.
Default Gateway Specifies the IP address of the default gateway.
DNS Server (P) Specifies the IP address of the primary DNS server.
DNS Server (S) Specifies the IP address of the secondary DNS server.
Off Disables the network standby function.
On
Enables the network standby function.
(The unit consumes more power than when “Off” is selected.)
Auto
Enables the network standby function.
(If “Network Connection” is set to “Wired”, the unit is set to the power saving
mode when the network cable is disconnected.)
Off Disables the MAC address filter.
On
Enables the MAC address filter. In “MAC Address 1-10”, specify the MAC addresses
of the network devices that will be permitted access to the unit.