Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Features
- Preparations
- General Setup Procedure
- Connecting Speakers
- Connecting a TV and Playback Devices
- Connecting the Radio Antennas
- Connecting a Network Cable or Preparing the Wireless Antenna
- Connecting Other Devices
- Connecting the Power Cable
- Selecting an On-Screen Menu Language
- Configuring the Necessary Speaker Settings
- Optimizing the Speaker Settings Automatically (YPAO)
- Connecting to a Network Device Wirelessly
- Connecting to the MusicCast Network
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- Playing Back Music via Bluetooth
- Playing Back Music Stored on a USB Storage Device
- Playing Back Music Stored on Media Servers (PCs / NAS)
- Listening to Internet Radio
- Playing Back iTunes / iPod Music with AirPlay
- Playing Back Videos / Audio in Multiple Rooms (Multi-Zone)
- Registering Favorite Items (Shortcut)
- Controlling the Unit from a Web Browser (Web Control)
- Viewing the Current Status
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Configurations
- Configuring Input Sources (Input Menu)
- Configuring the SCENE Function (Scene Menu)
- Configuring Sound Programs / Surround Decoders (DSP Program Menu)
- Configuring Various Functions (Setup Menu)
- Viewing Information About the Unit (Information Menu)
- Configuring the System Settings (ADVANCED SETUP Menu)
- ADVANCED SETUP Menu Items
- Changing the Speaker Impedance Setting (SPEAKER IMP.)
- Turning On / Off the Remote Control Sensor (REMOTE SENSOR)
- Selecting the Remote Control ID (REMOTE ID)
- Changing the FM / AM Tuning Frequency Setting (TUNER FRQ STEP)
- Switching the Video Signal Type (TV FORMAT)
- Removing the Limitation on HDMI Video Output (MONITOR CHECK)
- Selecting the HDMI 4K Signal Format (4K MODE)
- Switching the DTS Format Notification Setting (DTS MODE)
- Backing Up / Recovering the Settings (RECOV. / BACKUP)
- Restoring the Default Settings (INITIALIZE)
- Updating the Firmware (FIRM. UPDATE)
- Checking the Firmware Version (VERSION)
- Controlling External Devices with the Remote Control
- Updating the Unit’s Firmware via the Network
- Frequently Asked Questions
- Troubleshooting
- Error Indications on the Front Display
- Glossary
- Supported Devices and File Formats
- Video Signal Flow
- Multi-Zone Output
- Information on HDMI
- List of Remote Control Codes
- Specs
- Quick Start Guide
- Warranty
En 156
■ Zone2 Set, Zone3 Set
Configures the Zone2 or Zone3 settings.
Volume
Enables/disables volume adjustments for Zone2 or Zone3 output.
If you have connected an external amplifier with volume control to the unit, disable the volume
adjustment for the corresponding zone.
Settings
X
This setting is not available depending on the “Power Amp Assign” setting (p.142).
Max Volume
Sets the Zone2 or Zone3 limit value of the volumes.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5
dB
X
This setting is available only when “Volume” is set to “Variable”.
Initial Volume
Sets the Zone2 or Zone3 initial volume for when the unit is turned on.
Settings
X
This setting is available only when “Volume” is set to “Variable”.
Audio Delay
Adjusts the audio output timing for Zone2 or Zone3 so that the audio is synchronized with the
video.
Setting range
0
ms to 100 ms (1 ms increments)
Mono
Switches between stereo and monaural for Zone2 or Zone3 output.
Settings
Enhancer
Enables/disables Compressed Music Enhancer (p.83) for Zone2 or Zone3 output.
Settings
Tone Control
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) for Zone2 or
Zone3 output.
Settings
Fixed Disables volume adjustments for Zone2 or Zone3 output.
Variable
Enables volume adjustments for Zone2 or Zone3 output.
Off
Sets the level at the volume level of the unit when it last entered standby mode.
On
Sets at Mute or the specified volume level (-80.0 dB to +16.5 dB, 0.5 dB increments).
(Specify a volume level which is lower than the “Max Volume” setting.)
Off Produces stereo sounds in Zone2 or Zone3.
On Produces monaural sounds in Zone2 or Zone3.
Off Disables Compressed Music Enhancer.
On
Enables Compressed Music Enhancer.
Auto
Adjusts the levels of the high-frequency range (Treble) and low-frequency range
(Bass) automatically in synchronization with the main volume, with correction for
the auditory response of the human ear.
Manual
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)
manually (-6.0 to +6.0 dB, 0.5 dB increments).
Bypass
Does not adjust the level of high-frequency range (Treble) and low-frequency
range (Bass).