Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Features
- Preparations
- General Setup Procedure
- Connecting Speakers
- Connecting a TV and Playback Devices
- Connecting the Radio Antennas
- Connecting a Network Cable or Preparing the Wireless Antenna
- Connecting Other Devices
- Connecting the Power Cable
- Selecting an On-Screen Menu Language
- Configuring the Necessary Speaker Settings
- Optimizing the Speaker Settings Automatically (YPAO)
- Connecting to a Network Device Wirelessly
- Connecting to the MusicCast Network
- Playback
- Basic Playback Procedure
- Selecting the Input Source and Favorite Settings with One Touch (SCENE)
- Selecting the Sound Mode
- Listening to FM / AM Radio
- Playing Back Music via Bluetooth
- Playing Back Music Stored on a USB Storage Device
- Playing Back Music Stored on Media Servers (PCs / NAS)
- Listening to Internet Radio
- Playing Back iTunes / iPod Music with AirPlay
- Playing Back Videos / Audio in Multiple Rooms (Multi-Zone)
- Registering Favorite Items (Shortcut)
- Controlling the Unit from a Web Browser (Web Control)
- Viewing the Current Status
- Configuring Playback Settings for Different Playback Sources (Option Menu)
- Configurations
- Configuring Input Sources (Input Menu)
- Configuring the SCENE Function (Scene Menu)
- Configuring Sound Programs / Surround Decoders (DSP Program Menu)
- Configuring Various Functions (Setup Menu)
- Viewing Information About the Unit (Information Menu)
- Configuring the System Settings (ADVANCED SETUP Menu)
- ADVANCED SETUP Menu Items
- Changing the Speaker Impedance Setting (SPEAKER IMP.)
- Turning On / Off the Remote Control Sensor (REMOTE SENSOR)
- Selecting the Remote Control ID (REMOTE ID)
- Changing the FM / AM Tuning Frequency Setting (TUNER FRQ STEP)
- Switching the Video Signal Type (TV FORMAT)
- Removing the Limitation on HDMI Video Output (MONITOR CHECK)
- Selecting the HDMI 4K Signal Format (4K MODE)
- Switching the DTS Format Notification Setting (DTS MODE)
- Backing Up / Recovering the Settings (RECOV. / BACKUP)
- Restoring the Default Settings (INITIALIZE)
- Updating the Firmware (FIRM. UPDATE)
- Checking the Firmware Version (VERSION)
- Controlling External Devices with the Remote Control
- Updating the Unit’s Firmware via the Network
- Frequently Asked Questions
- Troubleshooting
- Error Indications on the Front Display
- Glossary
- Supported Devices and File Formats
- Video Signal Flow
- Multi-Zone Output
- Information on HDMI
- List of Remote Control Codes
- Specs
- Quick Start Guide
- Warranty
En 192
Y
• If HDMI Control does not work properly, try unplugging the TV in Step 3 and plugging in the TV again in Step 4.
It may solve the problem. Also, HDMI Control may not work if the number of connected devices exceeds the
limit. In this case, disable HDMI Control on the devices not in use.
• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
• We recommend using TV and playback devices from the same manufacturer so that HDMI Control works more
effectively.
• We do not assure the operation of all HDMI Control-compatible devices.
Audio Return Channel (ARC)
ARC allows you to input TV audio to the unit with the HDMI cable which transmits video signal
to the TV.
Check the following after the HDMI Control settings.
1
Select a TV program with the TV remote control.
2
Check that the input source of the unit will be automatically switched to
“AUDIO 1” and the TV audio will be played back on the unit.
If you cannot hear the TV audio, check the following:
• “ARC” (p.151) in the “Setup” menu is set to “On”.
• The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack marked
“ARC”) on the TV.
Some HDMI jack on the TV is not compatible with ARC. For details, refer to the instruction
manual for the TV.
Y
• If the audio is interrupted while using ARC, set “ARC” (p.151) in the “Setup” menu to “Off” and use an
audio cable (digital optical or stereo pin cable) to input TV audio to the unit (p.43).
• When using ARC, connect a TV with an HDMI cable that supports ARC.
X
“AUDIO 1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO
1 jacks, use “TV Audio Input” (p.151) in the “Setup” menu to change the TV audio input assignment. To use
the SCENE function (p.77), you also need to change the input assignment for SCENE 2.
HDMI signal compatibility
• When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be
output, depending on the type of the DVD player.
• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to
the instruction manual for each device.
• To decode audio bitstream signals on the unit, set the input source device appropriately so
that the device outputs the bitstream audio signals directly (does not decode the bitstream
signals on the playback device). For details, refer to the instruction manual for the playback
device.