Owner's Manual

En 146
■ HDCP Version
Selects the HDCP version of the HDMI input jacks for watching 4K video content.
Input sources
AV 1-7
Settings
■ HDMI Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in
stand by mode. If this function is set to “On” or “Auto”, you can use the input selection keys to
select an HDMI input even when the unit is in standby mode (the standby indicator on the unit
blinks).
Settings
Network
Configures the network settings.
■ Information
Displays the network information on the unit.
Choices
Auto
Automatically sets the version of HDCP according to content.
1.4 Sets the version of HDCP to always be 1.4.
Off
(This setting is available only when “HDMI Control” is set to “Off”.)
Does not output videos/audio to the TV.
On
Outputs videos/audio to the TV.
(The unit consumes more power than when “Off” is selected.)
Auto
Outputs videos/audio to the TV. If no signals are detected, the unit is set to the
power saving mode.
IP Address IP address
Subnet Mask Subnet mask
Default Gateway The IP address of the default gateway
DNS Server (P) The IP address of the primary DNS server
DNS Server (S) The IP address of the secondary DNS server
MAC Address
(Ethernet)
MAC address
MAC Address (Wi-Fi)
Network Name Network name (the unit’s name on the network)
MusicCast Network The status of the MusicCast network connection.
Wired/Wireless (Wi-Fi) The status of the wired or wireless connection
SSID
(When using wireless [Wi-Fi] network connection)
The SSID of the wireless network