User Manual

Table Of Contents
Automatically setting the input source names
Automatically sets the input source names depending on the connected external device.
The name is created automatically only when the unit can get the information about the connected external
device from the input source (such as HDMI).
Setup menu
“System” > “Input Rename” > (input)
1 Select an input source to be renamed.
2 Select “Auto”.
3 To change another input source name, repeat steps 1 to 2.
4 Press SETUP.
This completes the settings.
NOTE
When “Auto” is selected, the created name is saved even after the external device is disconnected. To reset to the default setting, with
no connection to the corresponding input jack, switch the setting to “Manual” and then back to “Auto”.
Related links
“Basic operation of the Setup menu”(p.191)
283
CONFIGURATIONS > Configuring various functions (Setup menu)