AV Receiver Owner’s Manual Read the supplied booklet “Safety Brochure” before using the unit.
CONTENTS Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting a device that supports SCENE link playback (remote connection) . . . . . . . . . . . . . . . . . . . . . . . 31 Connecting a device compatible with the trigger function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 FEATURES 6 What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Playback of USB storage device contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ideal speaker layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 HDMI and video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories Operating range of the remote control Check that the following accessories are supplied with the product. • Point the remote control at the remote control sensor on the unit and remain within the operating range shown below. Remote control Batteries (AAA, R03, UM-4) (x2) Within 6 m (20 ft) 30° 30° Insert the batteries the right way round. AM antenna FM antenna *One of the above is supplied depending on the region of purchase.
FEATURES What you can do with the unit Wide variety of supported content • iPod/iPhone/iPad . p.50 • USB . p.54 • Media server (PC/NAS) . p.57 • Internet radio . p.60 • AirPlay . p.62 Supports 2- to 7.1-channel (plus presence) speaker system. Allows you to enjoy your favorite acoustic spaces in various styles. • Automatically optimizing the speaker . p.34 settings to suit your room (YPAO) • Reproducing stereo or multichannel . p.
Full of useful functions! Useful tips ❑ Connecting various devices (p.26) ❑ Creating 3-dimensional sound fields (p.42) The combination of video/audio input jacks does not match an external device... A number of HDMI jacks and various input/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio devices (such as CD players), game consoles, camcorders, and other devices.
Part names and functions Front panel 1 2 3 4 5 6 7 8 9 : A MAIN ZONE B PURE DIRECT ZONE 2 ZONE CONTROL MEMORY INFO PRESET INPUT FM AM TUNING VOLUME SCENE BD/DVD YPAO MIC PHONES TV TONE CONTROL RADIO NET STRAIGHT PROGRAM VIDEO AUX USB SILENT CINEMA HDMI IN C 1 MAIN ZONE z key Turns on/off (standby) the unit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Control is enabled (p.87) • Standby Through is enabled (p.
Front display (indicators) 1 2 3 4 5 ENHANCER ADAPTIVE DRC STEREO 3 TUNED OUT 6 78 SLEEP ZONE 2 9 VOL. MUTE SW PL PR C L R SL SR SBL SB SBR : 1 HDMI Lights up when HDMI signals are being input or output. OUT Lights up when HDMI signals are being output. 2 CINEMA DSP Lights up when CINEMA DSP (p.42) is working. CINEMA DSP n Lights up when CINEMA DSP 3D (p.44) is working. 3 ENHANCER Lights up when Compressed Music Enhancer (p.46) is working. 4 ADAPTIVE DRC Lights up when Adaptive DRC (p.
Rear panel 1 2 DC OUT 5V 0.5A 3 NETWORK 4 HDMI 1 HDMI OUT (NET) 5 HDMI 2 (BD/DVD) HDMI 3 6 HDMI 4 HDMI 5 ARC SPEAKERS ANTENNA (RADIO) COMPONENT VIDEO AM FRONT COMPONENT VIDEO CENTER SURROUND SURROUND BACK/BI-AMP ZONE 2/PRESENCE REMOTE FM PR IN PR SINGLE OUT PB PB VIDEO VIDEO Y Y MONITOR OUT 12V 0.
Remote control 1 Remote control signal transmitter 1 Transmits infrared signals. 2 2 SOURCE z key RECEIVER SOURCE 2 3 Sets the remote control to operate external devices (p.100). This key lights up in green after pressed. 5 3 RECEIVER key External device operation keys Sets the remote control to operate the unit (p.100). This key lights up in orange after pressed. Let you play back and perform other operations for external devices when an input source other than “TUNER” is selected (p.100).
PREPARATIONS General setup procedure 1 Placing speakers (p.13) Select the speaker layout for the number of speakers that you are using and place them in your room. 2 Connecting speakers (p.17) Connect the speakers to the unit. 3 Connecting a TV (p.21) Connect a TV to the unit. 4 Connecting playback devices (p.26) Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit. 5 Connecting the FM/AM antennas (p.30) Connect the supplied FM/AM antennas to the unit.
1 Speaker placement 2 3 4 5 6 7 8 9 10 1 Placing speakers Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the representative speaker layout examples. Caution • Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers.
1 Speaker placement 2 3 4 5 6 7 8 9 10 7.1+2-channel system 7.1-channel system (using surround back speakers) Q W 1 9 1 2 3 4 5 6 9 9 2 3 4 5 6 7 7 • The surround back speakers and presence speakers do not produce sounds simultaneously. The unit automatically changes the speakers to be used, depending on the selected CINEMA DSP (p.42). 7.1-channel system (using presence speakers) Q W 1 9 4 6.
1 Speaker placement 2 3 4 5 6 7 8 9 10 5.1-channel system 3.1-channel system 1 9 2 1 3 9 4 3 5 4.1-channel system 2.
1 Speaker placement 2 3 4 5 6 7 8 9 10 ■ Setting the speaker impedance Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the speaker impedance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers. 1 Before connecting speakers, connect the power cable to an AC wall outlet. 2 While holding down STRAIGHT on the front panel, press MAIN ZONE z. MAIN ZONE z STRAIGHT 3 Check that “SP IMP.
1 2 Speaker connections 3 4 5 6 7 8 9 10 2 Connecting speakers Connect the speakers placed in your room to the unit. The following diagrams provide connections for 7.1+2-, 7.1-, and 6.1-channel systems as examples. For other systems, connect speakers while referring to the connection diagram for the 6.1-channel system. 7.1+2-channel system 7.
1 2 Speaker connections 3 4 5 6 7 8 9 10 7.1-channel system (using presence speakers) The unit (rear) The unit (rear) SPEAKERS FRONT CENTER ■ Connecting speaker cables 6.1-channel system SURROUND SPEAKERS SURROUND BACK/BI-AMP ZONE 2/PRESENCE FRONT CENTER SURROUND SURROUND BACK/BI-AMP SINGLE EXTRA SP AC IN b Loosen the speaker terminal.
1 2 Speaker connections 3 4 5 6 7 8 9 10 Connecting front speakers that support bi-amp connections When using front speakers that support bi-amp connections, connect them to the FRONT jacks and SURROUND BACK/BI-AMP jacks. To enable the bi-amp function, set “Power Amp Assign” (p.82) in the “Setup” menu to “5ch BI-AMP” after connecting the power cable to an AC wall outlet. Caution • Before making bi-amp connections, remove any brackets or cables that connect a woofer with a tweeter.
Input/output jacks and cables ■ Video/audio jacks ■ Video jacks ■ Audio jacks ❑ HDMI jacks ❑ COMPONENT VIDEO jacks ❑ OPTICAL jacks Transmit digital video and digital sound through a single jack. Use an HDMI cable. Transmit video signals separated into three components: luminance (Y), chrominance blue (PB), and chrominance red (PR). Use a component video cable with three plugs. Transmit digital audio signals. Use a digital optical cable. Remove the tip protector (if available) before using the cable.
1 2 3 TV connection 4 5 6 7 8 9 10 3 Connecting a TV Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit. ■ Connection Method 1 (HDMI Control/ARC-compatible TV) Connect the TV to the unit with an HDMI cable. The connection method varies depending on the functions and video input jacks available on your TV. Refer to the instruction manual of the TV and choose a connection method.
1 2 3 TV connection 4 5 6 7 8 9 10 ❑ Necessary settings To use HDMI Control and ARC, you need to configure the following settings. 3 Configure the settings for HDMI Control. For details on settings and operating your TV, refer to the instruction manual for the TV. a Enable HDMI Control on the TV and playback devices (such as HDMI Control-compatible BD/DVD player).
1 2 3 TV connection 4 5 6 7 8 9 10 ■ Connection Method 2 (HDMI Control-compatible TV) ❑ Necessary settings Connect the TV to the unit with an HDMI cable and a digital optical cable. To use HDMI Control, you need to configure the following settings. For details on settings and operating your TV, refer to the instruction manual for the TV. • The following explanation is based on the assumption that you have not changed the “HDMI” parameters (p.87) in the “Setup” menu.
1 2 3 TV connection 4 5 6 7 8 9 10 3 Configure the settings for HDMI Control. a Enable HDMI Control on the TV and playback devices (such as a HDMI Control-compatible BD/DVD player). b Turn off the TV’s main power and then turn off the unit and playback devices. c Turn on the unit and playback devices and then turn on the TV. ■ Connection Method 3 (TV with HDMI input jacks) Connect the TV to the unit with an HDMI cable and a digital optical cable.
1 2 3 TV connection 4 5 6 7 8 9 10 ■ Connection Method 4 (TV without HDMI input jacks) When connecting any video device to the AV 1–2 (COMPONENT VIDEO) jacks of the unit, connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks. When connecting any video device to the AV 3–6 (VIDEO) jacks or the front VIDEO jack of the unit, connect the TV to the MONITOR OUT (VIDEO) jack. If you select “AV 4” as the input source by pressing AV 4 or SCENE(TV), the TV audio will be played back on the unit.
1 2 3 4 Playback device connections 5 6 7 8 9 10 4 Connecting playback devices The unit is equipped with a variety of input jacks including HDMI input jacks to allow you to connect different types of playback devices. For information on how to connect an iPod or a USB storage device, see the following pages. – Connecting an iPod (p.50) ■ Component video connection Connect a video device to the unit with a component video cable and an audio cable (digital optical or digital coaxial).
1 2 3 4 Playback device connections 5 6 7 8 9 10 ■ Composite video connection ■ Changing the combination of video/audio input jacks Connect a video device to the unit with a video pin cable and an audio cable (digital coaxial, digital optical, or stereo pin cable). Choose a set of input jacks (on the unit) depending on the audio output jacks available on your video device.
1 2 3 4 Playback device connections 5 6 7 8 9 10 • The following operation is available only when your TV is connected to the unit via HDMI. 1 After connecting external devices (such as a TV and playback devices) and power cable of the unit, turn on the unit. 2 Press AV 2 to select “AV 2” (video input jack to be used) as the input source. 5 6 7 Use the cursor keys to select “Audio In” and press ENTER. 8 Press ON SCREEN. Use the cursor keys to select “AV5” (audio input jack to be used).
1 2 3 4 Playback device connections 5 6 7 8 9 10 Connecting audio devices (such as CD players) Connecting to the jacks on the front panel Connect audio devices such as CD players and MD players to the unit. Depending on the audio output jacks available on your audio device, choose one of the following connections. Use the VIDEO AUX jack to temporarily connect devices such as game consoles and camcorders to the unit.
1 2 3 4 5 FM/AM antenna connections 6 Network connections 7 8 9 10 5 Connecting the FM/AM antennas Connect the supplied FM/AM antennas to the unit. Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface. 6 Connecting to a network Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable). You can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS), on the unit.
1 2 3 4 5 6 7 Other connections 8 9 10 Connecting a device that supports SCENE link playback (remote connection) 7 Connecting other devices Connecting recording devices You can connect video/audio recording devices to the AV OUT and AUDIO OUT jacks. These jacks output analog video/audio signals selected as the input.
1 2 3 4 5 6 7 Other connections 8 Power cable connection 9 10 Connecting a device compatible with the trigger function The trigger function can control an external device in conjunction with operating the unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that supports a system connection or a device with a trigger input jack, you can use the trigger function by connecting the external device to the TRIGGER OUT jack.
1 2 3 4 5 6 7 8 9 Language setting 10 RECEIVER SOURCE RECEIVER z 9 Selecting an on-screen menu language HDMI 1 2 3 4 5 Select the desired on-screen menu language from English (default), Japanese, French, German, Spanish, Russian and Chinese. V-AUX AV 1 2 3 4 AUDIO 5 6 1 TUNER USB NET MAIN 2 ZONE 2 SCENE BD DVD TV NET PROGRAM MUTE TOP MENU RADIO V VOLUME OLUME POP-UP/MENU ON SCREEN ON SCREEN 1 2 Press RECEIVER z to turn on the unit. 3 4 Press ON SCREEN.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup RECEIVER SOURCE RECEIVER z 10 Optimizing the speaker settings automatically (YPAO) HDMI 1 2 3 4 5 V-AUX AV 1 2 3 4 AUDIO 5 6 1 TUNER USB NET MAIN 2 The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup The following screen appears on the TV. RECEIVER SOURCE • To check the measurement results, select “Result”. For details, see “Checking the measurement results” (p.36). HDMI 1 2 3 4 5 V-AUX AV 1 2 3 5 6 1 4 USB NET AUDIO TUNER MAIN 6 Use the cursor keys to select “Save/Cancel” and press ENTER. 7 To save the measurement results, use the cursor keys (e/r) to select “SAVE” and press ENTER.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup Checking the measurement results RECEIVER SOURCE 3 HDMI 1 2 3 You can check the YPAO measurement results. 4 5 V-AUX 1 AV 1 2 3 4 AUDIO 5 TUNER MAIN 6 1 USB NET 2 After the measurement, use the cursor keys to select “Result” and press ENTER. ZONE 2 • You can also select “Result” from “Auto Setup” (p.80) in the “Setup” menu, which displays the previous measurement results.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup Error messages If any error message is displayed during the measurement, resolve the problem and perform YPAO again. Error message Cause E-1: No Front SP Front speakers are not detected. E-2: No Sur. SP One of the surround speakers cannot be detected. E-3: No F.PRNS SP One of the presence speakers cannot be detected. E-4: SBR → SBL A surround back speaker is connected to the R side only.
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup Warning messages If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions. However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings. Warning message Cause Remedy W-1: Out of Phase A speaker cable may be connected with the reverse polarity (+/-). Select “Wiring” in “Result” (p.
PLAYBACK RECEIVER SOURCE HDMI 1 2 3 4 5 V-AUX AV 1 2 3 4 Input selection keys Basic playback procedure AUDIO 5 6 1 TUNER USB NET MAIN 2 1 ZONE 2 SCENE BD DVD TV NET PROGRAM MUTE TOP MENU RADIO VOLUME POP-UP/MENU ON SCREEN MUTE VOLUME 2 Use the input selection keys to select an input source. 3 Start playback on the external device or select a radio station. ON SCREEN a Press ON SCREEN. b Use the cursor keys to select “Input” and press ENTER.
SOURCE RECEIVER SOURCE Selecting the input source and favorite settings with one touch (SCENE) HDMI 1 2 3 4 5 V-AUX AV 1 2 3 5 6 1 4 TUNER USB NET Input selection keys AUDIO MAIN The SCENE function allows you to select the assigned input source, sound program, and Compressed Music Enhancer on/off with just one touch.
Selecting the sound mode RECEIVER SOURCE HDMI 1 2 3 4 5 The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). V-AUX AV 1 2 3 4 5 6 1 USB NET AUDIO TUNER MAIN 2 Selecting a sound program suitable for movies (p.42) ZONE 2 Press MOVIE repeatedly.
Enjoying sound field effects (CINEMA DSP) The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP technology (CINEMA DSP). It allows you to easily create sound fields like actual movie theaters or concert halls in your room. Drama This program features stable reverberations that match a wide range of movie genres, from serious dramas to musicals and comedies. The reverberations are modest, but suitably stereophonic.
■ Sound programs suitable for music/stereo playback (MUSIC) The following sound programs are optimized for listening to music sources. You can also select stereo playback. ❑ CLASSICAL Hall in Munich This program simulates a Munich concert hall with approximately 2,500 seats that uses stylish wood for the interior finishing. Fine, beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual seat is at the center left of the arena.
RECEIVER SOURCE HDMI 1 2 3 ■ Enjoying stereoscopic sound fields (CINEMA DSP 3D) Enjoying unprocessed playback CINEMA DSP 3D creates a natural stereoscopic sound field in your room. ■ Playing back in original channels (straight decode) 4 5 V-AUX You can play back input sources without any sound field effect processing. AV 1 2 3 5 6 1 4 TUNER USB NET AUDIO MAIN 2 CINEMA DSP 3D functions when both of the following conditions are met.
■ Playing back 2-channel sources in multichannel (surround decoder) RECEIVER SOURCE HDMI 1 2 3 4 5 The surround decoder enables unprocessed multichannel playback from 2-channel sources. When a multichannel source is input, it works the same way as the straight decode mode.
Enjoying compressed music with enhanced sound (Compressed Music Enhancer) RECEIVER SOURCE HDMI 1 2 3 4 5 V-AUX AV 1 2 3 5 6 1 4 TUNER USB NET AUDIO MAIN 2 Compressed Music Enhancer adds depth and breadth to the sound, allowing you to enjoy a dynamic sound close to the original sound before it was compressed. This function can be used along with any other sound modes.
Listening to FM/AM radio RECEIVER SOURCE HDMI 1 2 3 4 5 You can tune into a radio station by specifying its frequency or selecting from registered radio stations. V-AUX AV 1 2 3 5 6 1 TUNER USB NET 4 AUDIO MAIN 2 TUNER ZONE 2 SCENE BD DVD TV Selecting a frequency for reception NET • The radio frequencies differ depending on the country or region where the unit is being used. The explanation of this section uses a display with frequencies used in a U.S.A. model.
Registering favorite radio stations (presets) RECEIVER SOURCE HDMI 1 2 3 You can register up to 40 radio stations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers. 4 5 V-AUX AV 1 2 3 4 ■ Selecting a preset station Tune into a registered radio station by selecting its preset number. 1 Press TUNER to select “TUNER” as the input source. 2 Press PRESET repeatedly to select the desired radio station.
■ Browse screen Operating the radio on the TV RECEIVER SOURCE HDMI 1 2 3 You can view the radio information or select a radio station on the TV. 4 5 V-AUX 1 AV 1 2 3 4 5 6 1 TUNER USB NET AUDIO MAIN 1 Press TUNER to select “TUNER” as the input source. The playback screen is displayed on the TV.
Playing back iPod music You can play back iPod music on the unit using a USB cable supplied with the iPod. Connecting an iPod Connect your iPod to the unit with the USB cable supplied with the iPod. • An iPod may not be detected by the unit or some features may not be compatible, depending on the model or software version of the iPod. • To play back iPod videos on the unit, an Apple Composite AV Cable (not supplied) is required.
Playback of iPod content RECEIVER SOURCE ■ Browse screen HDMI 1 2 3 V-AUX AV 1 2 3 5 6 1 USB NET 1 2 3 Follow the procedure below to operate the iPod contents and start playback. 4 5 You can control the iPod with the menu displayed on the TV screen. 4 AUDIO TUNER MAIN 2 USB 1 5 Press USB to select “USB” as the input source. The browse screen is displayed on the TV.
■ Playback screen RECEIVER SOURCE HDMI 1 2 3 1 2 4 5 V-AUX AV 1 2 3 ■ Operating the iPod itself or remote control (simple play) 1 4 5 TUNER MAIN 6 1 USB NET 3 2 Press MODE to switch to the simple play mode. The TV menu screen turns off and iPod operations are enabled. AUDIO To display the TV menu screen, press MODE again. ZONE 2 2 SCENE BD DVD TV NET RADIO 1 Status indicators PROGRAM MUTE TOP MENU V VOLUME OLUME Display the current repeat/shuffle settings (p.
■ Repeat/shuffle settings RECEIVER SOURCE You can configure the repeat/shuffle settings of your iPod. HDMI 1 2 3 4 5 V-AUX AV 1 2 3 5 6 1 USB NET • During simple play, configure the repeat/shuffle settings directly on your iPod or press MODE to display the TV menu screen and then follow the procedure below. 4 AUDIO TUNER MAIN 2 ZONE 2 1 When “USB” is selected as the input source, press OPTION.
Playing back music stored on a USB storage device RECEIVER SOURCE HDMI 1 2 3 4 5 You can play back music files stored on a USB storage device on the unit. Refer to the instruction manuals for the USB storage device for more information. V-AUX AV 1 2 3 5 6 1 4 USB NET AUDIO TUNER MAIN 2 USB • If the USB storage device contains many files, it may take time to load the them. In this case, “Loading...” appears in the front display.
2 RECEIVER SOURCE HDMI 1 2 3 4 5 AV 2 3 5 6 1 TUNER USB NET 1 2 3 If a song is selected, playback starts and the playback screen is displayed. V-AUX 1 ■ Browse screen Use the cursor keys to select an item and press ENTER.
■ Playback screen RECEIVER SOURCE HDMI 1 2 3 V-AUX AV 1 2 3 5 6 1 USB NET You can configure the repeat/shuffle settings for playback of USB storage device contents. 1 2 4 5 ■ Repeat/shuffle settings 4 AUDIO TUNER MAIN 3 2 ZONE 2 1 When “USB” is selected as the input source, press OPTION. 2 Use the cursor keys to select “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER.
Playing back music stored on media servers (PCs/NAS) RECEIVER SOURCE HDMI 1 2 3 4 5 1 2 3 5 6 1 USB NET Playback of PC music contents You can play back music files stored on your PC or DLNA-compatible NAS on the unit. V-AUX AV 4 Follow the procedure below to operate the PC music contents and start playback. AUDIO TUNER MAIN 2 NET ZONE 2 SCENE BD DVD TV NET PROGRAM MUTE • To use this function, the unit and your PC must be connected to the same router (p.30).
3 RECEIVER SOURCE HDMI 1 2 3 4 5 AV 2 3 5 6 1 TUNER USB NET ■ Browse screen 1 2 3 If a song is selected, playback starts and the playback screen is displayed. V-AUX 1 Use the cursor keys to select an item and press ENTER.
■ Playback screen RECEIVER SOURCE HDMI 1 2 3 V-AUX AV 1 2 3 5 6 1 USB NET You can configure the repeat/shuffle settings for the playback of PC music content. 1 2 4 5 ■ Repeat/shuffle settings 4 AUDIO TUNER MAIN 3 2 ZONE 2 1 When “SERVER” is selected as the input source, press OPTION. 2 Use the cursor keys to select “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER.
Listening to Internet radio RECEIVER SOURCE HDMI 1 2 3 4 5 You can listen to Internet radio stations from all over the world. V-AUX You can control the Internet radio with the menu displayed on the TV screen. AV 1 2 3 4 AUDIO 5 6 1 TUNER USB NET MAIN 2 The browse screen is displayed on the TV. • To use this function, the unit must be connected to the Internet (p.30).
■ Browse screen RECEIVER SOURCE HDMI 1 2 3 1 2 3 4 5 V-AUX AV 1 2 3 5 6 1 TUNER USB NET ■ Playback screen 4 1 2 AUDIO MAIN 3 5 2 ZONE 2 4 SCENE BD DVD TV NET PROGRAM MUTE TOP MENU RADIO 1 Playback indicator 1 Playback indicator 2 List name 2 Playback information V VOLUME OLUME ON SCREEN Displays the list of Internet radio content. Use the cursor keys to select an item and press ENTER to confirm the selection.
Playing back iTunes/iPod music via a network (AirPlay) The AirPlay function allows you to play back iTunes/iPod music on the unit via network. Playback of iTunes/iPod music contents Follow the procedure below to play back iTunes/iPod music contents on the unit. iTunes PC 1 Router The unit Starts playback on iTunes or iPod Turn on the unit, and start iTunes on the PC or display the playback screen on the iPod. If the iTunes/iPod recognizes the unit, the AirPlay icon ( ) appears.
Menu RECEIVER SOURCE • The playback screen is available only when your TV is connected to the unit via HDMI. HDMI 1 2 3 4 5 V-AUX Play Control AV 1 2 3 5 6 1 4 USB NET • You can turn on the unit automatically when starting playback on iTunes or iPod by setting “Network Standby” (p.89) in the “Setup” menu to “On”. AUDIO TUNER MAIN 2 • You can edit the network name (the unit’s name on the network) displayed on iTunes/iPod in “Network Name” (p.90) in the “Setup” menu.
Playing back music in multiple rooms (multi-zone) The multi-zone function allows you to play back different input sources in the room where the unit is installed (main zone) and in another room (Zone2). For example, while you are watching TV in the living room (main zone), another person can listen to radio in the study room (Zone2). ■ Using the unit’s internal amplifier Connect the speakers placed in Zone2 to the unit with speaker cables.
■ Using an external amplifier Connect the external amplifier (with volume control) placed in Zone2 to the unit with a stereo pin cable. The unit (rear) HDMI 1 HDMI 2 (BD/DVD) HDMI 3 HDMI 4 You can operate the unit and external devices from Zone2 using the supplied remote control if you connect an infrared signal receiver/emitter to the unit’s REMOTE IN/OUT jacks.
Controlling Zone2 Remote connections between Yamaha products RECEIVER SOURCE RECEIVER z HDMI 1 2 3 4 5 V-AUX AV 1 2 3 5 6 1 4 USB NET AUDIO TUNER MAIN 2 AV 5–6 AUDIO 1–2 TUNER USB NET An infrared signal transmitter is not required if you are using Yamaha products that support remote connections, as the unit does. You can transmit remote control signals by connecting the REMOTE IN/OUT jacks with monaural mini-jack cables and an infrared signal receiver.
4 RECEIVER SOURCE HDMI 1 2 3 4 5 Start playback on the external device or select a radio station. Refer to the instruction manual for the external device. V-AUX AV 1 2 3 5 6 1 USB NET For details on the following operations, see the corresponding pages. 4 AUDIO TUNER MAIN 2 • Listening to FM/AM radio (p.47) ZONE 2 • Playing back iPod music (p.
Viewing the current status RECEIVER SOURCE HDMI 1 2 3 4 5 V-AUX AV 1 2 3 4 Switching information on the front display Viewing the status information on the TV 1 1 AUDIO 5 6 1 TUNER USB NET MAIN 2 ZONE 2 Press INFO. Each time you press the key, the displayed item changes. Press DISPLAY. The following information is displayed on the TV. SCENE BD DVD TV NET RADIO Audio Decoder PROGRAM MUTE Compressed Music Enhancer status VOL.
Configuring playback settings for different playback sources (Option menu) You can configure separate playback settings for different playback sources. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback. 1 Press OPTION. Option menu items • Available items vary depending on the selected input source. • Text in parentheses denotes indicators on the front display. OPTION Tone Control VOL.
■ Tone Control (Tone Control) ■ CINEMA DSP 3D Mode (CINEMA DSP 3D) Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds. Enables/disables CINEMA DSP 3D (p.44). If this function is set to “On”, CINEMA DSP 3D functions with the selected sound programs (except 2ch Stereo and 7ch Stereo). Choices Treble (Treble), Bass (Bass) Settings Setting range -6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments Default Bypass (Bypass) On (On) (default) Enables CINEMA DSP 3D.
■ Extended Surround (EXTD Surround) ❑ Subwoofer Trim (SW.Trim) Selects how to play back 5.1- to 7.1-channel sources when surround back speakers are used. Fine-adjusts the subwoofer volume. Settings Auto (Auto) (default) Automatically selects the most suitable decoder if signals that contain surround back channel signals are input, and reproduces the signals in 6.1- or 7.1-channel. If two surround back speakers are connected, the unit reproduces the 5.1-channel signals in 7.1-channel.
CONFIGURATIONS Configuring input sources (Input menu) 4 Use the cursor keys (q/w) to select an item and press ENTER. You can change the input source settings using the TV screen. 1 2 Press ON SCREEN. Use the cursor keys to select “Input” and press ENTER. • To return to the previous screen during menu operations, press RETURN. 3 5 6 Use the cursor keys (e/r) to select an input source to be configured and press the cursor key (q). Use the cursor keys to select a setting and press ENTER.
■ Rename/Icon Select ■ Audio In Changes the input source name and icon displayed on the front display or TV screen. Combines the video jack of the selected input source with an audio jack of others. For example, use this function in the following cases. Input sources HDMI 1–5, V-AUX, AV 1–6, AUDIO 1–2, USB ■ Setup procedure 1 Use the cursor keys (e/r) to select a template and press the cursor key (w).
■ Volume Interlock Enables/disables volume controls from iTunes/iPod via AirPlay. Configuring the SCENE function (Scene menu) You can change the settings of the SCENE function (p.40) using the TV screen. Input sources AirPlay Settings Off Disables volume controls from iTunes/iPod. Limited (default) Enables volume controls from iTunes/iPod within the limited range (-80 dB to 0 dB and mute). Full Enables volume controls from iTunes/iPod in the full range (-80 dB to +16.5 dB and mute).
4 ■ Load Use the cursor keys (q/w) to select an item and press ENTER. Loads the settings registered for the selected scene. Select “DETAIL” to configure the SCENE link playback setting or view the scene assignments. ❑ Device Control Recalls a selected scene and starts its playback on an external device connected to the unit via HDMI or on a Yamaha product connected to the REMOTE OUT jack. (SCENE link playback) Settings 5 6 Use the cursor keys and ENTER to change the setting.
■ Rename/Icon Select Changes the scene name and icon displayed on the front display or TV screen. ■ Setup procedure 1 2 3 Use the cursor keys (e/r) to select an icon and press the cursor key (w). Configuring sound programs/surround decoders (Sound Program menu) You can change the settings of the sound programs and surround decoders using the TV screen. 1 2 Press ON SCREEN. 3 Use the cursor keys (e/r) to select a sound program to be configured and press the cursor key (q).
4 Use the cursor keys (q/w) to select an item and press ENTER. Sound Program menu items • Available items vary depending on the selected sound program or surround decoder. ■ Settings for sound programs • To return to the previous screen during menu operations, press RETURN. Item Function Decode Type Selects a surround decoder to be used bPLIIx Movie (bPLII in combination with the selected sound Movie), Neo:6 Cinema program. DSP Level Adjusts the sound field effect level.
■ Settings for decoders Item Function Settings Reverb Delay Adjusts the delay between the direct sound and reverberant sound generation. 0 ms to 250 ms Higher to enhance the delay effect, and lower to reduce it. Adjusts the volume of the reverberant sound. 0% to 100% Higher to strengthen the reverberant sound, and lower to weaken it. Reverb Level The following items are available when you set “Decode Type” of “Surround Decoder” to “bPLIIx Music” or “Neo:6 Music”.
Configuring various functions (Setup menu) You can configure the unit’s various function with the menu displayed on the TV screen. 1 2 Press ON SCREEN. 3 Use the cursor keys (e/r) to select a menu. 4 Use the cursor keys (q/w) to select an item and press ENTER. • To return to the previous screen during menu operations, press RETURN. 5 6 Use the cursor keys to select a setting and press ENTER. To exit from the menu, press ON SCREEN. Use the cursor keys to select “Setup” and press ENTER.
Setup menu items Menu Item Function Auto Setup Power Amp Assign Page Automatically optimizes the speaker settings (YPAO). 34 Selects a speaker system. 82 Front Selects the size of the front speakers. 82 Center Selects whether or not a center speaker is connected and its size. 82 Surround Selects whether or not surround speakers are connected and their size. 82 Surround Back Selects whether or not surround back speakers are connected and their size.
Menu Item Function Page IP Address Configures the network parameters (such as IP address). 89 Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 89 MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 89 Network Name Edits the network name (the unit’s name on the network) displayed on other network devices.
Speaker (Manual Setup) ❑ Front Selects the size of the front speakers. Configures the speaker settings manually. Settings Large Select this option for large speakers. The front speakers will produce all of the front channel frequency components. Small (default) Select this option for small speakers. The subwoofer will produce front channel low-frequency components (configurable in “Bass Cross Over”). • “Front” is automatically set to “Large” when “Subwoofer” is set to “None”.
❑ Surround Back ❑ Subwoofer Selects whether or not surround back speakers are connected and their sizes. Selects whether or not a subwoofer is connected and its phase. Settings Settings Normal (default) Select this option when a subwoofer is connected (phase not reversed). The subwoofer will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels. Reverse Select this option when a subwoofer is connected (phase reversed).
■ Distance ■ Manual equalizer adjustment Sets the distance between each speaker and listening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distance from “Meter” or “Feet”. Choices Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front Presence R, Subwoofer 1 2 3 Press ENTER again to enter the edit screen. Use the cursor keys to select a speaker and press ENTER.
Sound ❑ Adjustment Configures the audio output settings. Adjusts the delay between video and audio output manually when “Auto/Manual Select” is set to “Manual”. You can fine-adjust the audio output timing when “Auto/Manual Select” is set to “Auto”. Setting range 0 ms to 500 ms (1 ms increments) Default 0 ms • “Offset” shows the difference between automatic adjustment and fine adjustment. ■ Dynamic Range ■ Lipsync Adjusts the delay between video and audio output.
■ Initial Volume Video Sets the initial volume when the receiver is turned on. Configures the video output settings. Settings Off (default) Sets the level to the volume level of the unit when it last entered standby mode. On Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB increments). (This setting works only when the initial volume is set lower than “Max Volume”.
❑ Aspect HDMI Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to “Processing”. Configures the HDMI settings. Settings Through (default) Does not convert the aspect ratio. 16:9 Normal Outputs 4:3 video signals to a 16:9 TV with black bands on either side of the screen. • This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or 2160p (4K) signals. ■ HDMI Control Enables/disables HDMI Control (p.115).
❑ ARC ❑ HDMI OUT Enables/disables ARC (p.21) when “HDMI Control” is set to “On”. Enables/disables the audio output from a TV connected to the HDMI OUT jack. Settings Settings Off Disables ARC. Off (default) Disables the audio output from the TV. On (default) Enables ARC. On Enables the audio output from the TV. • You do not need to change this setting normally.
Network Configures the network settings. 6 7 To save the changes, use the cursor keys to select “OK” and press ENTER. To exit from the menu, press ON SCREEN. ■ Network Standby Selects whether the unit can be turned on from other network devices (network standby). Settings Off (default) Disables the network standby function. On Enables the network standby function. (The unit consumes approximately 2 W of power.
■ Network Name Multi Zone Edits the network name (the unit’s name on the network) displayed on other network devices. Configures the multi zone settings. ■ Procedure 1 2 Press ENTER to enter the name edit screen. Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry. ■ Main Zone Set Configures the main zone setting. ❑ Zone Rename Changes the zone name (for main zone) displayed on the front display or TV screen. • To clear the entry, select “CLEAR”.
■ Zone2 Set Function Configures the Zone2 settings. Configures the functions that make the unit easier to use. ❑ Max Volume Sets the Zone2 maximum volume to prevent excessive loudness. Setting range -30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB Default +16.5 dB • This setting is available only when “Power Amp Assign” (p.82) is set to “7ch +1ZONE”. ❑ Initial Volume ■ Display Set Sets the Zone2 initial volume for when the unit is turned on.
❑ Wall Paper Manual Selects the image to be used as wallpaper on the TV. Switches the output level for electronic signal transmission manually when “Trigger Mode” is set to “Manual”. This setting can also be used to confirm proper function of the external device connected via the TRIGGER OUT jack. Settings Picture 1 (default), Picture 2, Picture 3 Displays the selected image on the TV screen when there is no video signal. Gray Displays a gray background on the TV screen when there is no video signal.
■ Memory Guard ECO Prevents accidental changes to the settings. Configures the power supply settings. Settings Off (default) Does not protect the settings. On Protects the settings until “Off” is selected. • When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen. Icon ■ Auto Power Down Sets the amount of time for the auto-standby function. If you do not operate the unit for the specified time, the unit will automatically go into standby mode.
Language Select an on-screen menu language. Viewing information about the unit (Information menu) You can view information about the unit using the TV screen. 1 2 Press ON SCREEN. 3 Use the cursor keys (e/r) to select an information type. 4 To exit from the menu, press ON SCREEN. Use the cursor keys to select “Information” and press ENTER.
■ Network Types of information Displays the network information on the unit. ■ Audio Signal IP Address IP address Displays information about the current audio signal. Subnet Mask Subnet mask Default Gateway The IP address of the default gateway DNS Server (P) The IP address of the primary DNS server Format Audio format of the input signal Channel The number of source channels in the input signal (front/surround/LFE) For example, “5.1 (3/2/0.1)” means 5.
Changing the speaker impedance setting (SP IMP.) Configuring the system settings (ADVANCED SETUP menu) SP IMP. 8 MIN Configure the system settings of the unit while viewing the front display. 1 2 Change the unit’s speaker impedance settings depending on the impedance of the speakers connected. Set the unit to standby mode. Settings While holding down STRAIGHT on the front panel, press MAIN ZONE z. MAIN ZONE z PROGRAM 3 4 5 6 Ω MIN Select this option when you connect 6-ohm speakers to the unit.
Switching the video signal type (TV FORMAT) Restoring the default settings (INIT) TV FORMAT NTSC Switch the video signal type of the unit so that it matches to the format of your TV. INIT CANCEL Restores the default settings for the unit. Settings NTSC, PAL Choices Default U.S.A. and Canada models: NTSC Australia model: PAL Removing the limitation on HDMI video output (MON.CHK) VIDEO Restores the default settings for video configurations. ALL Restores the default settings for the unit.
Checking the firmware version (VERSION) VERSION xx.xx Check the version of firmware currently installed on the unit. • You can also check the firmware version in “System” (p.95) in the “Information” menu. • It may take a while until the firmware version is displayed.
SOURCE RECEIVER SOURCE Controlling external devices with the remote control HDMI 1 2 3 4 5 You can use the unit’s remote control to operate external devices (such as BD/DVD players) if you have registered the remote control code of the external device. V-AUX AV 1 2 3 4 AUDIO 5 6 1 TUNER USB NET MAIN 2 3 4 Press TV z. Use the numeric keys to enter the 4-digit remote control code. • You cannot control an external device that does not have a remote control sensor.
RECEIVER SOURCE HDMI 1 2 3 4 5 SOURCE z SOURCE RECEIVER V-AUX AV 1 2 3 4 Input selection keys AUDIO 5 6 1 TUNER USB NET MAIN 2 ZONE 2 Registering the remote control codes for playback devices You can use the unit’s remote control to operate playback devices if you have registered their remote control codes.
SOURCE RECEIVER SOURCE Resetting remote control codes RECEIVER HDMI 1 2 3 You can reset a remote control code registered to each input selection key. 4 5 V-AUX AV 1 2 3 5 6 1 4 USB NET Input selection keys AUDIO TUNER MAIN 2 1 SOURCE blinks twice. ZONE 2 Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 1.
Updating the unit’s firmware RECEIVER SOURCE HDMI 1 2 3 4 5 New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. V-AUX AV 1 2 3 5 6 1 4 USB NET AUDIO TUNER MAIN 2 • If you want to update the firmware later, select “CLOSE” in Step 2.
APPENDIX Frequently asked questions The new speaker system does not provide an ideal sound balance... I want to turn off the on-screen messages displayed during operations... If you have changed speakers or have a new speaker system, use “Auto Setup” to optimize the speaker settings again (p.34). If you want to adjust the speaker settings manually, use “Manual Setup” in the “Setup” menu (p.82).
Troubleshooting Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the following: a The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely.
Audio Problem No sound. The volume cannot be increased. Cause Select an appropriate input source with the input selection keys. Signals that the unit cannot reproduce are being input. Some digital audio formats cannot be played back on the unit. To check the audio format of the input signal, use “Audio Signal” in the “Information” menu (p.95). The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable.
Problem No sound from the TV (when HDMI Control is used). Only the front speakers work on multichannel audio. Cause Remedy The TV is set to output audio from the TV speakers. Change the audio output setting on your TV so that the TV audio is output from the speakers connected to the unit. (If the TV is connected to the unit with an audio cable) The TV audio input setting does not match the actual connection. Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack (p.87).
FM/AM radio Problem Cause There is multi-path interference. Remedy Adjust the FM antenna height or orientation, or place it in a different location. Set “FM Mode” in the “Option” menu to “Mono” to select monaural FM radio reception (p.71). FM radio reception is weak or noisy. Your area is too far from the FM station transmitter. Use an outdoor FM antenna. We recommend using a sensitive multi-element antenna. AM radio reception is weak or noisy.
Problem Cause Remedy The files in the PC cannot be viewed or played back. The files are not supported by the unit or the media server. Use the file format supported by both the unit and the media server. For information about the file formats supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.57). The selected Internet radio station is currently not available. There may be a network problem at the radio station, or the service may have been stopped.
Error indications on the front display Message Cause Remedy Access denied Access to the PC is denied. Configure the sharing settings and select the unit as a device to which music contents are shared (p.57). Access error The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. The unit cannot access the iPod. Turn off the iPod and turn it on again. The connected iPod is not supported by the unit.
Ideal speaker layout Use this diagram as a guide. You do not need to adjust the speaker layout to the following diagram exactly. Q W 0.5 to 1 m (1.6 to 3.3 ft) 0.5 to 1 m (1.6 to 3.3 ft) 1.8 m (5.9 ft) 1 9 1.8 m (5.9 ft) 2 3 9 Turn it slightly inward to reduce wall reflections. Turn it slightly inward to reduce wall reflections.
Glossary Audio information ■ Audio decoding format Dolby Digital Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD discs. Dolby Digital EX Dolby Digital EX creates total 6.1-channel audio from 5.1-channel sources that are recorded with Dolby Digital Surround EX. This decoder adds a surround back sound to the original 5.1-channel sound.
Sampling frequency/Quantization bit Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”. • Sampling frequency Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate. When the sampling frequency is higher, the range of frequencies that can be played back are wider.
Yamaha technologies CINEMA DSP (Digital Sound Field Processor) Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions (such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are differences in the sound that you hear.
Video signal flow Video signals input from a video device to the unit are output to a TV as shown below. ■ Video conversion table • You can select the resolution and the aspect ratio applied to HDMI-output video processing in “Video Mode” (p.86) in the “Setup” menu. • The unit does not convert 480-line and 576-line video signals interchangeably.
(Example) Information on HDMI HDMI Control HDMI Control HDMI Control HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations. You can also control playback devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with an HDMI cable. For details on connections, see “Connecting a TV” (p.
7 Check that the unit is properly synchronized with the TV by turning off the TV or adjusting the TV volume with the TV remote control. HDMI signal compatibility Audio signals Audio signal type Audio signal format Compatible media (example) 2ch Linear PCM 2ch, 32 to 192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio • If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on the TV.
Reference diagram (rear panel) DC OUT 5V 0.5A NETWORK HDMI 1 HDMI OUT (NET) HDMI 2 (BD/DVD) HDMI 3 HDMI 4 HDMI 5 ARC SPEAKERS ANTENNA (RADIO) COMPONENT VIDEO AM FRONT COMPONENT VIDEO CENTER SURROUND SURROUND BACK/BI-AMP ZONE 2/PRESENCE REMOTE FM PR IN PR SINGLE OUT PB PB VIDEO VIDEO Y Y MONITOR OUT 12V 0.
Trademarks Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. “HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered trademarks of HDMI Licensing LLC. x.v.Color™ “x.v.Color” is a trademark of Sony Corporation. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S.
Specifications Input jacks Other jacks USB • Analog Audio • REMOTE IN x 1 • Capable of iPod, Mass Storage Class USB Memory • REMOTE OUT x 1 • Current Supply Capacity: 2.1 A • TRIGGER OUT x 1 Network • DC OUT x 1 • PC Client Function HDMI • Compatible with DLNA ver. 1.5 • HDMI Specification: Deep Color, “x.v.
Audio Section • Rated Output Power (2-channel driven) (20 Hz to 20 kHz, 0.09% THD, 8 Ω) • Residual Noise (IHF-A Network) Front L/R (Speaker Out) ..................................... 150 µV or less • Channel Separation • 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.) Mono ................................................................. 3 µV (20.8 dBf) • Signal to Noise Ratio (IHF) Front L/R .................................................................90 W+90 W AV 5 etc. (Input 5.
Index Symbols ★ key .........................................................11 Lock icon (o) ...........................................93 Numerics 2.1-channel system (Speaker placement) ............................15 2ch Stereo (Sound program) ....................43 3.1-channel system (Speaker placement) ............................15 4.1-channel system (Speaker placement) ............................15 4K signal (Video signal resolution) .........116 5.1-channel system (Speaker placement) ..............
Connection (Speaker cable) .....................18 Connection (Speaker) ...............................17 Connection (Subwoofer) ...........................18 Connection (Video devices) ......................26 Crossover frequency setting (Subwoofer) ...........................................34 D Decode Type (Sound Program menu) ......77 Decoder Mode (Input menu) ....................73 Default Gateway ........................................89 Delay Enable (Lipsync, Setup menu) .......
High speed HDMI cable ...........................20 I Impedance (Speaker) ...............................13 In.Trim (Option menu) ...............................71 Indicator (Part names and functions) ..........9 INFO key ...................................................68 Information (Front display) ........................68 Information display ......................................9 Information menu ......................................94 INIT (ADVANCED SETUP) ........................
PLIIx Movie (Extended surround) .............71 PLIIx Movie (Surround decoder) ...............45 PLIIx Music (Extended surround) .............71 PLIIx Music (Surround decoder) ...............45 PLIIxMo (Extended surround) ...................71 PLIIxMu (Extended surround) ...................71 Power Amp Assign (Manual setup, Setup menu) .................82 Presence speakers (Speaker connection) ............................18 Preset (FM/AM radio) ................................
Surround Back (Speaker, Setup menu) ....83 Surround Back Initial Delay (Sound Program menu) .........................77 Surround Back Liveness (Sound Program menu) .........................77 Surround Back Room Size (Sound Program menu) .........................77 Surround decoder .....................................45 Surround Initial Delay (Sound Program menu) .........................77 Surround Liveness (Sound Program menu) .........................77 Surround Room Size (Sound Program menu) ...........
© 2012 Yamaha Corporation YE226B0/EN