Operation Manual

PREPARATIONS Connecting the FM/AM antennas En 27
MHL connection
Connect an MHL-compatible mobile device (such as smartphones) to the unit with an
MHL cable. You can enjoy full HD videos and multichannel audio sources stored on the
mobile device. The VIDEO AUX jack of the unit enables you to input videos and audio
directly from the mobile device to the unit.
If you select “V-AUX” as the input source by pressing V-AUX, the video/audio played
back on the mobile device will be output from the unit.
To watch videos input to the VIDEO AUX jack, you need to connect your TV to the HDMI OUT jack of the
unit (p.21).
You need to prepare an MHL cable that match the jack on your mobile device.
You can operate the mobile device using the menu operation keys, external device operation keys and
numeric keys on the remote control. However, some features may not be compatible, depending on the
mobile device or its application. In this case, operate the mobile device itself.
If “Standby Through” (p.102) in the “Setup” menu is set to “On”, you can output mobile device videos/audio
to the TV or operate the mobile device using the remote control of the unit even when the unit is in standby
mode.
The unit supplies power to the mobile device in the following conditions.
The unit is turned on.
The unit is in standby mode while “Standby Through” (p.102) in the “Setup” menu is set to “On”.
Connect the supplied FM/AM antennas to the unit.
Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
Assembling and connecting the AM antenna
Unwind only the length of cable needed from the AM antenna unit.
The wires of the AM antenna have no polarity.
CONTROL
PHONES
SILENT
CINEMA
STRAIGHT
VIDEO
HDMI/
5V 2.1A
VIDEO
AUX
TONE
PROGRAM
YPAO MIC
MHL 5V 1A
MHL
MHL
Mobile device
MHL output
The unit (front)
5 Connecting the FM/AM antennas
OPTICAL
OPTICAL
COAXIAL
VIDEO
AV4
AV3
AV2
AV 1
(TV)
P
B
Y
P
R
COMPONENT
VIDEO
VIDEO
MONITOR OUT
P
B
Y
P
R
HDMI
OUT
ARC
ANTENNA
(
RADIO
)
FM
AM
FRONT CENTER SURROUND
SPEAKERS
NETWORK
DC OUT
TRIGGER OUT
REMOTE
5V
0.5A
(
NET
)
12V
IN
OUT
0.1A
COMPONENT VIDEO
HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5
(
BD/DVD
)
VIDEO
FM antenna
AM antenna
The unit (rear)
Hold down Insert Release
1 2 3 4 5 6 7 8 9 10 11