Operation Manual

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 94
Network
Network Connection Selects the network connection method. 102
IP Address Configures the network parameters (such as IP address). 102
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 103
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 103
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 104
Multi Zone
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the TV screen. 104
Zone2 Set
Max Volume Sets the Zone2 maximum volume to prevent excessive loudness in the second zone. 105
Initial Volume Sets the Zone2 initial volume for when the unit is turned on. 105
Zone Rename Changes the zone name (for Zone2) displayed on the TV screen. 105
Function
Display Set
Dimmer (Front Display) Adjusts the brightness of the front display. 105
Short Message Selects whether to display short messages on the TV screen when the unit is operated. 105
Wallpaper Selects the image to be used as wallpaper on the TV. 105
Trigger Output
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 106
Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. 106
DC OUT Power Mode Selects how to supply power through the DC OUT jack. 106
Memory Guard Prevents accidental changes to the settings. 107
ECO
Auto Power Standby Sets the amount of time for the auto-standby function. 107
ECO Mode Enables/disables the eco mode (power saving mode). 108
Language Select an on-screen menu language. 108
Menu Item Function Page