Owner’s Manual

En 108
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Automatically optimizes the speaker settings (YPAO). 44
Manual Setup
Power Amp Assign Selects a speaker system. 110
Configuration
Front Selects the size of the front speakers. 110
Center Selects whether or not a center speaker is connected and its size. 110
Surround Selects whether or not surround speakers are connected and their size. 111
Surround Back Selects whether or not surround back speakers are connected and their size. 111
Front Presence Selects whether or not presence speakers are connected and their size. 111
Subwoofer Selects whether or not a subwoofer is connected and its phase. 111
Layout Selects the layouts of the surround speakers and front presence speakers. 111
Distance Sets the distance between each speaker and listening position. 112
Level Adjusts the volume of each speaker. 112
Parametric EQ Adjusts the tone with an equalizer. 112
Test Tone Enables/disables the test tone output. 113
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 113
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 113
Adjustment Adjusts the delay between video and audio output manually. 114
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 114
Max Volume Sets the limit value of the volumes. 114
Initial Volume Sets the initial volume for when this receiver is turned on. 114
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level when the volume is adjusted. 114
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 114
Virtual Surround Back Speaker Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. 114
Object Decode Mode Enables/disables playback of object-based audio signals such as Dolby Atmos or DTS:X contents. 115
Video Video Mode Enables/disables the video signal processing (resolution and aspect ratio). 115
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 116
Audio Output Selects a device to output audio. 117
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 117