Owner’s Manual
Table Of Contents
- Introduction
- FEATURES
- PREPARATIONS
- General setup procedure
- Connecting speakers
- Connecting a TV and playback devices
- Connecting the radio antennas
- Connecting a network cable or preparing the wireless antenna
- Connecting a device compatible with the trigger function
- Connecting the power cable
- Selecting an on-screen menu language
- Configuring the necessary speaker settings
- Optimizing the speaker settings automatically (YPAO)
- Connecting to a network device wirelessly
- Connecting to the MusicCast network
- PLAYBACK
- Basic playback procedure
- Selecting the input source and favorite settings with one touch (SCENE)
- Selecting the sound mode
- Listening to FM/AM radio (Except for Australia and Russia models)
- Listening to DAB radio (Australia and Russia models)
- Listening to FM radio (Australia and Russia models)
- Playing back music via Bluetooth
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Playing back iTunes/iPhone music with AirPlay
- Playing back music in multiple rooms (multi-zone)
- Registering favorite items (shortcut)
- Controlling the unit from a web browser (web control)
- Viewing the current status
- Configuring playback settings for different playback sources (Option menu)
- CONFIGURATIONS
- Configuring input sources (Input menu)
- Configuring the SCENE function (Scene menu)
- Configuring sound programs/surround decoders (DSP Program menu)
- Configuring various functions (Setup menu)
- Viewing information about the unit (Information menu)
- Configuring the system settings (ADVANCED SETUP menu)
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SP IMP.)
- Selecting the remote control ID (REMOTE ID)
- Changing the FM/AM tuning frequency setting (TU)
- Switching the video signal type (TV FORMAT)
- Removing the limitation on HDMI video output (MON.CHK)
- Selecting the HDMI 4K signal format (4K MODE)
- DTS Format Notification Setting (DTS MODE)
- Restoring the default settings (INIT)
- Updating the firmware (UPDATE)
- Checking the firmware version (VERSION)
- Updating the unit’s firmware via the network
- APPENDIX
En 110
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Automatically optimizes the speaker settings (YPAO). 41
Manual Setup
Power Amp Assign Selects a speaker system. 113
Configuration
Front Selects the size of the front speakers. 113
Center Selects whether or not a center speaker is connected and its size. 113
Surround Selects whether or not surround speakers are connected and their size. 114
Surround Back Selects whether or not surround back speakers are connected and their size. 114
Front Presence Selects whether or not presence speakers are connected and their size. 114
Subwoofer Selects whether or not a subwoofer is connected and its phase. 114
Layout Selects the layouts of the surround speakers and front presence speakers. 114
Distance Sets the distance between each speaker and listening position. 115
Level Adjusts the volume of each speaker. 115
Parametric EQ Adjusts the tone with an equalizer. 115
Test Tone Enables/disables the test tone output. 116
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 116
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 116
Adjustment Adjusts the delay between video and audio output manually. 117
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 117
Max Volume Sets the limit value of the volumes. 117
Initial Volume Sets the initial volume for when this receiver is turned on. 117
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level when the volume is adjusted. 117
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 117
Virtual Surround Back Speaker Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. 117
Object Decode Mode Enables/disables playback of object-based audio signals such as Dolby Atmos or DTS:X contents. 118
Video Video Mode Enables/disables the video signal processing (resolution and aspect ratio). 118
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 119
Audio Output Selects a device to output audio. 120
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 120